-
It is very likely that it is overheating protection (
When the CPU reaches the preset protection temperature of the motherboard, the motherboard will automatically power off) Silicone plays a role in improving heat dissipation
Suggestion It is better to buy silicone and coat it to ensure that the heatsink and CPU are in good contact.
-
Shutdown? Is it a sudden power outage, or is it like a normal shutdown?
If it shuts down suddenly, you need to check whether the voltage you have there is too low or too unstable. Some computer power supplies have automatic protection, which will automatically disconnect when the current changes too much. If not, it may be that the power supply is too low to meet the needs of the computer.
If it is shut down normally, it means that you have a higher chance of being poisoned. Also, the system is unstable, get ready to reinstall!
-
That's used to conduct heat. How do you get it out of the heat when you wipe it?
-
You see if there is a problem with the graphics card, if the graphics card is fine, it is estimated that the power belt will not move.
-
Computer motherboard wiring problems!
-
Hello friends:
The computer will automatically shut down after a while, mainly for the following five reasons: (including the treatment scheme below).
The first reason: there is a problem with the power supply, when the filter capacitor of the power supply is bulging, it is normal to start the boot, it has been used for a period of time, due to the bulging, resulting in leakage, insufficient power supply, the power supply starts to protect itself, cut off the power supply, and shut down, treatment method: replace the power supply.
The second reason: that is, the voltage of your place is unstable, when the voltage is not between 170V ---240V, there will be automatic shutdown and restart from time to time, Jianyi uses a UPS uninterruptible power supply.
It plays the role of voltage regulation protection.
The third reason: the virus destroys some files of the system, when it runs to a certain point, with the CPU usage and memory usage really continue to increase, after reaching 100%, the computer will freeze, automatically shut down, it is recommended to use antivirus software in safe mode.
If the antivirus does not work, reinstall the system.
Or one-click restore.
The fourth reason: that is, there is a problem with the CPU fan of the computer or a problem with the radiator (for example, the quality of the radiator is very poor, which also means that the thermal conductivity of the radiator is not very good): if there is too much ash on your CPU fan, the fan is stuck, resulting in the CPU not being cooled, when the temperature reaches the temperature set by the motherboard, the motherboard starts protection, and it will automatically shut down, when the quality of the radiator is poor, or the clip of the radiator is not tight, it will also cause automatic shutdown, the reason is the same as above, Jianyi, Clean the dust on the CPU fan, if the CPU fan is broken, replace a better fan and a good radiator OK, if the clip is loose, reinstall the clip.
At the same time, add some silicone grease paste to the CPU to help cool the CPU.
The fifth reason is that your computer uses something that can be scheduled to shut down.
If you set a time to shut down, there will be a phenomenon that it will shut down when the time comes, such as if you use: such as Thunderbolt.
Wait a minute. In the software settings, there is an action that automatically shuts down after completing a certain task. But generally the default setting is off. The purpose is to automatically shut down the computer when a task is completed when a task is running a more time-consuming operation.
-
Possible causes of automatic power outages:
First, after automatic shutdown If it can be turned on normally, then this situation belongs to the self-protection function of the system.
When the computer is overloaded or encounters other conditions that damage the CPU or system, poisoning, CPU usage is often 100 and so on. In order to protect the CPU from damage, the system automatically loses power. It is recommended to optimize the system.
Second, poor heat dissipation, which generally occurs when the CPU is overheated or the CPU is overloaded due to the long-term operation of the computer. Excessive dust and improper fan operation will lead to poor heat dissipation and overheating of the CPU, which will trigger the automatic power-off protection function. If this is the case, you need to clean the laptop fan, radiator.
3. Automatic power failure caused by external devices, removal of newly installed hardware devices, such as external cameras, printers, including upgraded memory, etc.;
Fourth, the notebook itself is faulty and needs to be specifically detected.
-
The computer will automatically shut down after a period of time, sometimes because of the power supply, sometimes because of the fan, and sometimes because your memory module is loose.
-
It could be a virus or internal part of your computer, or you may have set it to hibernation.
-
It's supposed to be hibernating, you just change the power option and turn off the hibernation.
-
The computer will automatically shut down after a period of time, probably because it will sleep after a long period of no operation, if you operate it will also shut down automatically, it may be a problem with the machine.
-
It may be that something is wrong with the system. You can try reinstalling the system or take your computer to a repair shop for repair.
First of all, let's correct it: the CPU rotation is wrong, to say that the CPU fan is rotating. If the CPU is transferred, it will be troublesome, and the following questions are: >>>More
1. Poisoning 2. Too much software.
3. Software Conflicts. >>>More
There are several kinds of questions, and I will go down in order of the closest cause1The capacitance of the computer motherboard is bad, and the CPU cannot dissipate heat due to the fact that the CPU does not rotate due to the fact that the CPU does not rotate 3There is a problem with the power supply in the computer, 4 systems are installed more or system problems, 5 computers have viruses installed with 360 and Rising fire prevention, etc.
Personally, I think this is the sound of the brake caliper colliding with the bracket when reversing. Because the brake caliper will be subjected to a forward force because of the wheel inertia when driving forward and braking, and the brake caliper will be subjected to a force that goes backward and upward when reversing, the brake caliper and the bracket of the vehicle are generally floating links, there is a certain activity clearance, after you drive forward for a period of time and brake, the caliper will move forward a little from the normal position because of the force, and at this time the reversing brake caliper will be dragged to the rear, one before and one after the other makes this distance longer, so the sound of hitting the bracket is louder. At this point, the brake calipers are already in the rear position, and there is no longer a crashing sound due to the large moving gap. >>>More
1. Test the display separately Method: In the case of shutdown, turn on the power button of the monitor separately to see if the display has a similar "no signal" prompt, if there is good, if there is not, there may be a problem with the display. >>>More