How Hikvision video recorder can be connected to a mobile phone for real time monitoring

Depending on the specific model, some models support EZVIZ.

If you want to add a video recorder to your EZVIZ Cloud account, you can configure the video recorder as follows:

1.Make sure that the LAN port of the recorder is connected to the router with a network cable. Enter the main menu of the video recorder - system configuration - network configuration - platform access, confirm that the enabled EZVIZ cloud has been checked, and the verification code has been filled in (if the code stream encryption is enabled, the verification code needs to be entered for remote access, and the verification code is 6 capital letters).

If the verification code is empty, you can fill in six uppercase letters by yourself (abcdef cannot be filled).

2.Click Network Configuration - Basic Configuration, and set the IPv4 address to the IP address of the same network segment as the router.

Subnet Mask (, default gateway.

Fill in the address of the router, the preferred DNS address is filled in, and the backup can be filled in the DNS address of the local operator; The MTU value is reduced to 1300 and click Apply.

First operate the video recorder, and then operate the mobile phone, a few simple steps to achieve the first remote monitoring, no matter where you are in the world, as long as there is the Internet, you can watch the monitoring.

Hanjiang River overlook (Wang Wei) and end in the south (Wang Wei).

Here's how it works:Tools Raw Materials:

iphone13

iOS15 Method Steps:

<> Summary:

The operation steps for Hikvision to connect to a mobile phone for remote monitoring are as follows:

Tools Raw materials: iphone13, ios15,.

2. Then click on the three-character icon in the upper left corner.

3. Then select the Device Manager option.

4. In the menu, click the Add button.

5. Select the registration type, select the IP domain type here, and then enter the IP address, port number, username and password.

6. After the input is completed, click the preview button below.

To connect monitoring with a mobile phone, you must first have the following two conditions::

2. Hikvision video recorder can access the Internet.

The specific steps are as follows:

<>4. After the first registration is completed, it will automatically enter the "EZVIZ" menu interface, and click "Add Device" under "My Devices" here.

5. Enter the "Scanning device***" interface, there is a brief introduction on the back of the Hikvision video recorder, and there is a *** inside, point the phone at *** to scan and add back to the device.

<>8. Then enter the "Device Name" and "Device Group" interfaces in turn, and we can directly click "Next".

9. After following the above steps, you can use your mobile phone ** to monitor.

The method of connecting the Hikvision camera to the mobile phone is relatively simple, and the specific method is as follows:

3. Then find "My Device" and click "Add Device" below, you can automatically get the device information of Hikvision camera, and then click "Add" function;

4. Finally, enter the "Device Name" and "Device Group" interfaces to set them in turn, so that the Hikvision camera will be successfully connected to the mobile phone.

Under normal circumstances, if you want to use a mobile phone to connect to Hikvision camera monitoring, you must first meet two conditions: one is that the monitoring is normally connected and can be displayed; The other is that the Hikvision camera has access to the Internet.

Hikvision is a leading supplier of monitoring products in China, committed to continuously improving the best processing technology and the best analysis technology, and providing leading monitoring products, technical solutions and professional quality services to the world, so you can use it with confidence.

To connect monitoring with a mobile phone, you must first have the following two conditions::

2. Hikvision video recorder can access the Internet.

The specific steps are as follows:

<>4. After the first registration is completed, it will automatically enter the "EZVIZ" menu interface, and click "Add Device" under "My Devices" here.

5、Enter the "Scanning device***" interface,There is a brief introduction on the back of the Hikvision video recorder,There is a *** inside,Aim the phone at *** to scan and add back to the device。

<>8. Then enter the "Device Name" and "Device Group" interfaces in turn, and we can directly click "Next".

9. After following the above steps, you can use your mobile phone ** to monitor.

Summary. Hello! Dear, glad for your question.

Enter the serial number, username, and password of the device, and click "Add Device". 4.After the device is successfully added, find the device that needs to be remotely monitored in the device list and click enter.

5.Click "Preview" to realize remote monitoring of mobile phones**. It's important to note that remote monitoring** requires both the device and the phone to be connected to the internet, and the device needs to have the remote monitoring feature turned on.

4.After the device is successfully added, find the device that needs to be remotely monitored in the device list and click enter. 5.

Click "Preview" to realize remote monitoring of mobile phones**. It should be noted that remote monitoring** requires that both the device and the mobile phone are connected to the Internet, and the device needs to turn on the remote monitoring function. In addition, if your device is an NVR or DVR, you also need to set up port mapping on the device to map the port of the device to the router to achieve remote monitoring**.

Is this the only way to connect the surveillance to the phone?

Dear, you are a switch, you have to see if your Hikvision DVR supports the function of not supporting remote link to mobile phone.

I can not find. Hello, your Hikvision camera is in**, dear.

Installed.

So, you have to look at whether your device supports remote mobile terminals, and look at the model.

Is it okay to have the two microcodes above?

Yes, dear, this is to support remote mobile phone links.

There should be one in the camera settings screen.

Web ports, mobile phone ports, and if there are signaling ports, all three must be mapped in the router.

Device: DVR, monitor, or TV.

1. Enter the main menu of the DVR, select "System Configuration" - Network Configuration", enable EZVIZ Cloud, and record the device verification code.

2. Enter the official website of EZVIZ and register a EZVIZ cloud account.