Traces of the wiper scraping on the front windshield, how to break

Updated on Car 2024-02-22
15 answers
  1. Anonymous users2024-02-06

    The first is that the glass itself of your car is not of good quality. Even if the wiper is exposed, it should not leave scratches on the glass. On**, search:

    Glass scratch repair. There is a kind of polishing paste, and after applying it, I don't stop wiping it with a towel. In addition, you should change to a new wiper and buy a pair of quality that is more than 50rmb on **.

  2. Anonymous users2024-02-05

    Hello, if this glass is scratched, there is no way to do this, only to replace the glass.

  3. Anonymous users2024-02-04

    Good afternoon, the general reason for this situation is that the glass is too dirty, or the wiper blades are aging and the wiper blades are not clean, and the glass needs to be wiped clean, and then replaced with new wiper blades.

  4. Anonymous users2024-02-03

    Hello, it should be the aging of the wiper blade that causes the scraping to be unclean, it is recommended to replace the wiper blade in the try, and the trace is light, it is recommended to use fine sandpaper to polish it to observe.

  5. Anonymous users2024-02-02

    Hello, for this case, first of all, you need to check whether your wiper blades are worn, if the wiper blades are worn, they need to be replaced in time, and at the same time, the windshield should be polished.

  6. Anonymous users2024-02-01

    This depends on the specific situation, I'm afraid it's difficult, you need to go to the car beauty shop to repair it and try it, if it doesn't work, you can only replace it.

  7. Anonymous users2024-01-31

    Hello, this problem is generally caused by the aging of the wiper for a long time, this is a consumable item, it is recommended that you directly replace the wiper, the cost is not expensive.

  8. Anonymous users2024-01-30

    Hello, this situation should be caused by the aging of the wiper blade rubber strip of the vehicle or the insufficient tension of the wiper arm, it is recommended that you go to the repair shop to replace the new wiper blade! Check the wiper arm for problems!

  9. Anonymous users2024-01-29

    Hello, this may be a problem with the wiper blade, you can directly replace it for about 120 yuan from Bosch.

  10. Anonymous users2024-01-28

    The scratches on the front windshield can't be removed unless you get a new glass, which is caused by not paying attention to the usual driving.

  11. Anonymous users2024-01-27

    It should be that the wiper is aging and not clean, so it is better to replace it with a new one, otherwise it is easy to affect the line of sight.

  12. Anonymous users2024-01-26

    Relatively slight marks can be wiped off with a special metal cloth for glass; If the traces are more serious, you can go to a professional 4S shop, where there is professional glass repair equipment, first polishing, and then waxing.

    In order to prevent this kind of situation in the future, you can put a layer of glass film on the glass, which can avoid the glass from being scratched, and you can also replace the wipers and choose a boneless wiper. Pay attention to cleaning at ordinary times to avoid dust, small stones and the like on the glass and wipers, which is easy to scratch the windshield.

    Wiper precautions.

    After washing the car in winter, there is often water accumulation in the fitting place of the wiper blade and the windshield, because the outdoor temperature is very low, it will cause the wiper to freeze on the windshield, if the wiper is used without knowing it, it is very likely to cause damage to the wiper blade, motor and other components. Don't leave in a hurry after washing your car, use a dry rag or hair dryer to clean up the water at the junction of the wiper blades and windshield.

    It is recommended to turn on the heater and blow the front windshield after starting the vehicle, and use the hot air of the air conditioner to melt the frozen wipers.

  13. Anonymous users2024-01-25

    <> is the same with your wipers?

    1. Usually we recommend using a special car glass degreasing film paste to eliminate the glass oil film, compared with household dish soap, laundry detergent and toothpaste, it can avoid the problem of wiper and car paint scratch corrosion.

    Comparison before and after degreasing film.

    2. How to use the degreasing film paste, shake the degreasing film paste, squeeze a little onto the car glass, use the integrated felt to draw circles on the glass to wipe, and finally clean the foam.

    Steps to use the degreasing film cream.

  14. Anonymous users2024-01-24

    If the marks are slight, you can use a metal cloth for glass, which can wipe the marks off. If the marks are more serious, you can go to a professional 4S shop for automobiles, where there are professional glass repair equipment, polishing first, and then waxing.

    In order to prevent this kind of situation in the future, you can paste a layer of glass film on the glass, which can avoid the glass being scraped and changed to the socks. Replace the wipers and choose a boneless wiper. How to repair the traces of the front windshield of the car by the windshield How to pay attention to cleaning it at ordinary times to avoid dust, small stones and the like on the glass and wipers, which is easy to scratch the windshield.

  15. Anonymous users2024-01-23

    Summary. Hello! Front windshield wiper scratches can be solved by polishing the front windshield of the vehicle, most of the scratches on the front windshield of the vehicle are caused by the wiper malfunctioning, or the problem caused by the wipers that are often used to clean the front windshield of the vehicle without using glass water.

    Hello! Front windshield wiper scratches can be solved by polishing the front windshield of the vehicle, most of the scratches on the front windshield of the vehicle are caused by the wiper malfunctioning, or the problem caused by the wipers that are often used to clean the front windshield of the vehicle without using glass water.

    I wish you a happy life, happiness and good health!

Related questions
14 answers2024-02-22

The first gear is intermittent, scrape once, stop and scrape again; If the first gear does not move at all, there is a problem, so make sure it first.

25 answers2024-02-22

Medical skills are placed in the front, precisely because medical ethics are important, it should be placed in the back, this is the language habit of Chinese, Chinese puts the stress in the back, the stress reading is important, the medical ethics said in front of me I certainly agree, but this is a matter of language habits, for example, you praise a person's two advantages, say that this person learns well, morality is better, think about it, good morality, learning better is another effect, you may ask here is a more word, in fact, the meaning of the eight words on your pennant is also progressive, mainly for symmetry, you read 1Superb medical skills and nobler medical ethics 2Noble medical ethics and more exquisite medical skills You should be clear about which outstanding medical ethics are Chinese, and the Chinese habit is to put the progressive meaning behind.

5 answers2024-02-22

A preface is a text that introduces and reviews a work or an article. A preface, also known as a "narrative" or "introduction", is an article that explains the purpose of the book's work or publication, the style of the compilation, or the author's situation, as well as comments on the writer and research on related issues. A preface, also known as a "preface", "preface", or "introduction", is an article that is placed before the body of a work. >>>More

11 answers2024-02-22

Automatic and simple, manual cool. I personally like manual!

19 answers2024-02-22

The English abbreviation of cout means output, and the English abbreviation of cin means input, the output stream of cout is , and the input stream of cin is, so the output input stream of cout and cin is to be clear, i is the abbreviation of cin, and o is the abbreviation of out, so the header file of cin cout is. >>>More