I cut off the fibrous roots that had been smooth sailing, and I didn t know if I could plant them

It's normal to trim some properly, and if there are still some left, they will be alive.

Potting soil selection. Before planting, you have to choose a good pot soil, smooth sailing is suitable for planting in fertile and nutrient-rich soil, it is recommended to use a mixture of rotten leaves and garden soil, and the pot is selected according to the size of the plant.

Second: Illumination.

Smooth sailing, prefers a relatively warm and humid environment, does not tolerate direct sunlight, according to some research data, in the summer needs 60 or 70 percent of the shade to meet his growth needs. If the light does not meet the requirements for a long time, its flowering period will be delayed or will not bear flowers directly, so you can put it in a brightly lit indoor planting, not under strong light, otherwise the leaves will turn yellow and fall off one after another.

Third: temperature.

As mentioned above, it prefers humid environments. The temperature suitable for its growth is between 22 and 28 degrees, and from March to September it is between 24 and 30 degrees; From September to March next year, the temperature will remain at 18 to 21. In addition, it is not tolerant to severe cold, so the minimum temperature in winter should not be lower than 14 degrees, and if the temperature is below 10 degrees, the plant will stop growing and the leaves will be frostbitten.

Fourth: watering.

It has a large amount of water stored in the pot, so it should be watered often to keep the soil moist, but it should not be watered too much, if it is watered too much, too much water will accumulate in the pot, and it will rot its rhizomes. In summer, the evaporation is relatively large, so it is necessary to spray it with water from time to time to maintain a certain humidity so that it can grow normally.

Fifth: fertilization.

Smooth sailing requires fertilizer, and agricultural fertilizer and raw fertilizer can not be applied, which will only burn the plants, causing the plants to wither and die. Also, remember to water when fertilizing, it is best to mix fertilizer and water together, so that it will not affect the plant.

Precautions. 1. Potting soil replacement: one or two years to change the pot to it, when changing the pot, you can slightly prune the root system, cut off some old and useless roots, and the soil is also replaced from the new, so that the growth will be more beneficial.

2. Pests and diseases: The growth time is the most susceptible to pests and diseases. When planting, spray insecticides regularly, such as dicofol and nisolone, which are used well.

It's not a big problem, but it will take some time to recover.

After smooth sailing and flowering, use sterilized scissors to start pruning from the base of the flower stem, pruning so that the cut is as low as possible. After smooth sailing and flowering, it is necessary to apply diluted solid fertilizer every half month to replenish nutrients, and water in time to soak the entire soil. After that, it can also be repotted and replanted with a larger pot so that the smooth sailing root system can grow better.

After smooth sailing and flowering, you need to cut it off, you can use sterilized sharp scissors, start pruning from the base of the flower stem, pruning so that without damaging the petioles, the cut is as low as possible, and the remaining flower stems will dry out on their own. Note that after pruning, apply disinfectant to the wound in time.

Smooth sailing consumes a lot of nutrients during flowering, and fertilizer needs to be added to supplement nutrients after flowering. Solid fertilizer can be applied every half a month to supplement nutrition, pay attention to the fertilization need to avoid applying raw fertilizer or thick fertilizer, need to dilute the fertilizer with water, and then use.

After smooth sailing and flowering, it is necessary to replenish water in time to soak all the soil. In the later stage of watering, it is necessary to observe the dryness of the soil, and then properly water and moisturize the soil after it is found to be dry and white, so that the soil is in a slightly moist state, so as to avoid excessive watering that leads to rot of the rhizome.

After smooth sailing and flowering, large pots can also be replaced for maintenance, giving smooth sailing more room to grow, so that its root system can be better stretched. In addition, it is necessary to replant with new soil so that it can absorb more nutrients and grow vigorously.

Old roots and rotten roots can be cut off.

1. Suitable ambient temperature:

The growth temperature of hydroponic plants is 5 -30 , and they can grow normally in this range.

2. Appropriate lighting:

The light exposure of hydroponic plants is mainly scattered light, and it does not necessarily have to be exposed to the sun. In summer, direct sunlight should be avoided as much as possible.

3. Change the water and clean the roots of the flowers

Hydroponic plants should be changed about 7 days in summer, and once in about 10-15 days in winter, and a few drops of special nutrient solution for hydroponic flowers can be added (the concentration of nutrient solution is prepared according to the requirements of the manual).

Vessels used to grow hydroponic plants are prone to moss, which affects the ornamentation of the root system and consumes oxygen in the water. When changing the water, you should first wash off the mucus of the flower roots with clean water, and cut off the old roots and rotten roots. And wash the utensils and roots with moss.

Each time the water is changed, the interface of the water should be submerged in 1 2-2 3 of the root system, and the rest of the root segments should be exposed to the air.

4. Moisturizing and spraying foliar fertilizers

In order to prevent the occurrence of leaf drying, during daily care, water should be sprayed with water to moisturize the foliar surface, and it is best to spray foliar fertilizer once a week, which can not only provide nutrients for the leaves, increase the luster of the leaves, but also achieve the purpose of resisting low temperature in winter.

No, you don't.

Methods of reproduction. 1. Dividing propagation.

Because the white crane taro is easy to produce sprouting tillers, this method is mostly used for propagation. Robust plants can be divided once every 2 years. In early spring, before the new shoots are born, the whole plant is poured out of the pot, the soil is removed, and the rhizome is cut at the base of the cluster.

It is best to have more than 3 stems and buds in each small cluster, and try to bring as many root groups as possible, so as to facilitate the new plant to extract new leaves and plump plant shape quickly.

2. Tissue culture propagation.

With young inflorescences and lateral buds as explants, they were inoculated on MS medium supplemented with 10 mg of 6 l of benzylaminoadenine and 2 mg of indoleacetic acid after 40 to 45 days. The adventitious buds were then transferred to MS medium supplemented with 2 mg of indoleacetic acid and induced rooting for 30 to 40 days to become intact plants.

No need to lose it.

It is a foliage plant, and even if it has bloomed, the leaves cannot be cut. The flowering stems can be cut off, and the cut should be as low as possible without hurting the petioles. The remaining flower stems will dry up on their own.

White crane taro, alias: smooth sailing

White palm, bract taro. Latin name: Spathiphyllum Kochii Engl

et krause 。It belongs to the Araceae family, a perennial herbaceous plant, emerald green leaves, white Buddha flame buds, very fresh and elegant, and is an important ornamental flower in the world. It is also an expert in filtering indoor exhaust gases, and has certain effects on ammonia, acetone, benzene and formaldehyde.

At the beginning of the 20th century, it began to be used for bonsai ornamentation, and by the 80s it was very popular in Europe"The flower of innocence"It has the meaning of purity, calm, peace and tranquility.

When the petals turn green, they can be cut off.

As a perennial evergreen herbaceous plant, the growth rate is very fast, and only regular watering and fertilization, it will not take long to grow luxuriantly, but it must be properly pruned, only in this way can it make smooth sailing more robust growth, so how to prune it? In fact, the pruning method is very simple, so let's learn about the next smooth sailing pruning method.

First, how to prune smooth sailing].

Smooth sailing, also known as white crane taro, is a more common foliage plant in life, so it is necessary to prune properly, but many people do not know how to prune, in fact, the pruning method is very simple, as long as the collapse hand will cut off the extra leaves, and then the withered leaves will also be pruned off.

Only in this way can it make smooth sailing grow more robustly, and during the pruning period must pay more attention, can not be pruned immediately after fertilization, which will only make smooth sailing and grow again will be the same, so after pruning for it, you can water it properly, and then do not fertilize, after a month you can carry out proper fertilization.

Second, a smooth sailing pruning method].

Generally speaking, there is no need to prune deliberately, because it is smooth sailing for 2-3 years to renew, the old ones are not blooming, the leaves become smaller, waiting for the white flowers to turn green, and then turn black or the tips of the flowers are dry, the flowers can be cut off from the bottom, which does not affect the normal growth and the next flowering.

Generally, before a large number of new shoots germinate in early spring every year, it is necessary to change the pot once, remove part of the existing soil, trim the root system, add new culture soil and plant it in a larger pot, so as to facilitate the development of the root system and the growth and growth. It is advisable to loosen the soil on the pot surface frequently, so that the pot soil is often kept loose and breathable, as long as the temperature is suitable, it can grow well throughout the year.

Third, smooth sailing can be pruned after the breeding group suspicion].

Keep the potting soil moist during the growing period of a sail sedan car, and fertilize once every half a month or use"Huiyou"20-20-20 general fertilizer. The white crane taro has strong tillering power, and when changing pots every year, pay attention to pruning the roots and cutting off the wilted leaves. Over-dense plants are divided and potted.

It can be propagated by ramification and tissue culture. Until the growth point is destroyed, the Hulk will not sprout until it grows to the point of maturity; After artificially destroying the growth point, each plant can be tillered 3-5 buds, when the new shoots grow to a height of about 15-20 cm, they can be cut and inserted in perlite or coarse sand to let them grow roots. When cutting, pay attention to part of the stem, and dip the wound with charcoal ash to prevent rot.

Conclusion: >

Through the detailed introduction above, I believe you already know how to prune, in fact, pruning is relatively simple, and at home breeding smooth sailing, as long as it is not diligent fertilization and watering, the growth rate is not very fast, but if you want to prune, you can follow the above smooth sailing pruning method to do.

What you are asking is that it is smooth sailing, can the fibrous roots of hydroponics be cut when they grow?

It can be pruned, and the weak roots and rotten roots can be pruned regularly, which is conducive to the smooth growth of hydroponics.