Is there a fault in the meter? Show E data, what can you say if you know?

In order to avoid the subsequent impact on your electricity consumption and billing, please reflect to the owner of the meter in a timely manner, if you belong to the electricity customer of Guangdong Power Grid, please call the 24-hour power supply service **95598, and the power supply company will arrange staff to follow up.

We hope you find ours helpful.

Hello, after all, the meter is also a mechanical equipment, so it is possible to fail, in such a situation, first of all, you still have to contact the power maintenance department to check it.

If there is a fault in the meter, it is best to use the electric board in general, if there is this leakage and do not charge, I can replace the electric board.

There are also times when the meter is faulty, for example, its data is inconsistent, or the power of the meter does not match the actual situation.

This is not displayed, or the battery number is not displayed.

The display e is the fault alarm information, and there is a fault ** information in the manual.

Yes, but you have to look at the number behind E to know the specific fault code, for example, the display of E-01 on the IC meter means that the internal memory of the meter is faulty.

If the meter is faulty, when a box of data is displayed, it is not a fault, it is a form of display of the meter.

The meter is faulty, showing e data. If there is a problem with the dashboard display of the current meter, we recommend that you check the connection of the meter.

If the meter is broken, or if you think the meter is broken, don't open it yourself to check the situation. The first is security, and the second is that if you open it privately, then it will not be clear to the electricity bureau in the future. The best thing to do is to go to the power company to report it for repairs.

If the gas fails, consult the gas company and report for repair in time! Don't do it yourself!

1. If E-01 is displayed on the IC meter, the internal memory of the meter is faulty.

2. IC card prepaid watt-hour meter is an intelligent watt-hour meter that uses IC card as the data transmission medium of electric energy value, and adds load control part and other functional modules to the watt-hour meter (electronic watt-hour meter or mechanical watt-hour meter) to realize electricity collection and electricity settlement. The management electricity sales system includes a user information management subsystem, an IC card initialization system, a statistical analysis subsystem and an electronic sales system.

If the meter is faulty, what can be the situation if the art gathers? I feel that if the meter appears e, it may be burned out by the current, you can use an electric pen to repair it, is there any current passing through?

How to deal with problems with the meter:

First, determine the accuracy of the meter.

Most of today's household meters use electronic counting with a red light-emitting diode on it.

When it is bright, it means that there is electricity, when it is flashing, it means that it is using electricity, and the faster it flashes, it means that it consumes more electricity; In the mechanical meter, the rotation of the aluminum disc is used to count, and every 3600 revolutions of the aluminum disc is counted as one kilowatt-hour of electricity; For example, according to the design of the mechanical meter, every time it is lit (a pulse), the electricity consumption is 1 3600 kWh, that is, it is lit 3600 times within 1 hour, and the electricity consumption is one kilowatt-hour; If you feel that the meter is too fast, you can connect a 100-watt ordinary light bulb alone, it takes one hour, and the standard electricity consumption should be kWh, which can be seen on the meter whether the meter is accurate or fast or slow!

2. Determine whether electricity has been stolen.

According to your description, if the meter is abnormal, in order to avoid the subsequent impact on your electricity consumption and billing, please report to the owner of the meter in time, if you belong to the electricity customer of Guangdong Power Grid, please call the 24-hour power supply service **95598, and the power supply company will arrange staff to follow up and deal with it.

We hope you find ours helpful.

The meter is a commonly used instrument, although the relevant departments have focused on its management, but there may be some failures, such as measurement deviation, aluminum disc stuck, fast and slow when walking, noise during operation, etc. If you have a certain electrical knowledge, you can solve some small problems in daily use. However, when it comes to the structural problems in the meter, do not open and disassemble it by yourself, and should be overhauled and handled by the power department in time.

What should I do if there is an abnormality in the meter? Check the obvious excessive electricity consumption: 1. Pull down the main switch under the meter, and the meter should be stopped, otherwise there is a problem with the meter.

2. Find leakage after confirming that the meter is normal: unplug and turn off all electrical appliances, and use the multimeter RX10K file to measure the resistance of the live wire to the ground wire and the live wire to the neutral line of the main switch, if the resistance value is infinite, it indicates that the line is intact and does not leak. If there is a leakage resistance value in the measurement, indicating that the line is leaking, it is necessary to disconnect each branch one by one to find it in sections, and the common leakage parts are:

Toilets, wet parts of the kitchen, wires, switches, sockets. High-power switches, sockets, wire connectors. The wire is bent and moves.

Scratch area. 3. If the circuit is in good condition after testing, finally use the multimeter RX10K file to check whether the insulation of the electrical plug wiring to the metal shell is good, and focus on checking the electrical appliances that come into contact with water such as washing machines, water heaters, etc.

First determine the accuracy of the meter Most of the current household meters are used for electronic counting, with a red light-emitting diode on it, which indicates that there is electricity when it is bright, and when it is flashing, it means that it is using electricity, and the faster it flashes, the more electricity is consumed; In the mechanical meter, the rotation of the aluminum disc is used to count, and every 3600 revolutions of the aluminum disc is counted as one kilowatt-hour of electricity;

The easiest way is to report to the power company and let them come over to check, otherwise there will be an abnormality in the end, and under normal circumstances, it will cost you more money.

If there is an abnormality in the meter, the power supply should be cut off immediately to prevent the meter from catching fire due to failure. Ask a professional electrician, do a thorough inspection, see what the problem is and deal with it.

You need to write your own filter judgment, hint: the common characteristics of the tags are"<"or">", you can read the entire file as a file stream, then screenshot the tags, and the rest is the content!

Common faults and solutions in the use of electricity meters and programs Meter LCD display: E1: means that the remaining amount is zero E2: indicates the alarm power, and the card can be restored E3: Overload trips, and the card can be restored E

You can find a professional electrician to check it for you and use some professional tools to measure it. It's not good for individuals to do.

If there is an abnormality in the meter, it means that there is a problem with the voltage, so solving the voltage problem can solve the meter.

What should I do if the electricity consumption of the meter is abnormal? Answer: How to check if the electricity consumption is obviously excessive:

1. Pull down the main switch under the meter, and the meter should be stopped, otherwise there is a problem with the meter.

2. Find leakage after confirming that the meter is normal by the above method: unplug and turn off all electrical appliances, and use the multimeter RX10K file to measure the main switch.

3. If the circuit is in good condition after testing, finally use the multimeter RX10K file

If someone asks me, what is rejection? I'll be sure to tell him the full meaning! If someone asks me, what is mediocrity? I'll be sure to say, "What do you think? —Epigraph.

When I saw this essay title, two huge words "vulgar" appeared in my mind, and a sense of joy spread to my mind. Thoughts poured in, patting on my shore, words colliding with each other, voices becoming more and more violent, "waves" rising higher and higher, crashing against the Berlin Wall formed by these four words, but none of them could break through. The dazzling sunlight was constantly shifting, and the shadows covering the "sea" were getting bigger and bigger, and I couldn't tell whether it was dark or blank.

It successfully rejects all the mediocre words in my mind, what seems to be vulgar is not necessarily vulgar, what seems noble is not necessarily mediocre!

Man is given the power to accept or reject from birth, some substance, or some spirit. Every time power is exercised, a certain "element" will inevitably undergo a qualitative change imperceptibly, whether it is slow or galloping? On the "surface" or "underground"?

And what kind of "element" will it combine with to react, is it physical or chemical? But the only thing that is certain is that the result of the reaction will be the result of the new substance, now or in the future, and there is some kind of influence.

Growing up is a process of gradually isolating and helpless, you have to work hard to become strong, and then take charge of yourself.

The meter shows E-03, what's wrong, is it broken?

The meter shows E-03, what's wrong, is it broken? The meter shows E03: Relay failure The meter failure generally appears on the prepaid card meter indicating that the card is initialized wrong, you will replace the card in the correct position and insert it, if this error is displayed every time**, it means that the electric card needs to be replaced, it depends on who you pay for your electricity bill, if it is handed over to the power supply company, you must apply to the power supply company to quietly replace the card, if it is a property company, you must buy a card in the property company.

Hello dear! The meaning of the electric meter showing the stove E4: When the single-phase smart meter shows ERR-04, the alarm light and LCD screen are always on, this is because the clock battery voltage indicated by ERR-04 is insufficient.

When the above faults occur, the customer generally does not need to deal with it by himself, and only needs to pass the 95598 guaranteed foot banquet repair. Because the meter is the asset of the power supply company, the power supply bureau will deal with or replace it free of charge in case of failure. Hope it helps!

1. If the meter fails because of the responsibility of the power supply company or some non-human factors, the power supply company should be responsible for replacing the meter and no fee will be charged.

2. Meter failures caused by other reasons should be borne by the users themselves.

3. If the meter is lost, broken or burned out due to overload, the user should tell the power company in time to facilitate the power company to take measures in time.

4. If the meter is caused by water ingress into the meter box, such as switch tripping, power outage, etc., you can call customer service **95598, and the power supply department will arrange relevant personnel to deal with it; If the meter is burned out, you need to bring the ID card of the head of the household to the local power supply station to apply for a meter replacement.

According to your description, if the meter is abnormal, in order to avoid the subsequent impact on your electricity consumption and billing, please report to the owner of the meter in time, if you belong to the electricity customer of Guangdong Power Grid, please call the 24-hour power supply service **95598, and the power supply company will arrange staff to follow up and deal with it.

We hope you find ours helpful.

2018-12-18 What should I do if I suspect that there is an abnormality in the meter? 6 2017-06-04 Is there any easy way to suspect a problem with your home meter 6 2013-07-22 What should I do if I suspect that there is a problem with my meter? 3 2018-01-23 Hello, I suspect that there is a problem with my home meter, how can I check it?

2 2018-01-27 What should I do if I suspect that there is a problem with the meter The electricity bill is not normal after changing the meter.

If you think that the metered energy meter is inaccurate, you can bring the identity certificate of the electricity user to the business hall to apply for meter inspection.

Dear, the reasons why it is not shown on the meter are as follows: 1. The meter is not powered on. It can be connected to the rated voltage on the nameplate.

2. The battery in the meter is under-voltaged. Replace the display battery in the energy meter. 3. The meter hardware is damaged.

Seek technical support from the manufacturer or replace the energy meter with a new one. The meter is the abbreviation of the electric energy meter, which is used to measure electric energy, also known as the watt-hour meter, fire meter, electric energy meter, and kilowatt-hour meter, which refers to the instrument that measures various electrical quantities. How to view the meter:

Method 1: The general straight-forward single-phase meter and three-phase meter can directly read the number minus the last reading to be the amount of electricity at this stage. Method 2:

The three-phase meter connected by the current transformer connection mode should observe the current ratio of the connected silver collapse current transformer, and the number read on the meter is multiplied by the current ratio is the measured electricity, and the accurate loss and line loss should be added.

The electricity meter at home has an err-04 failure**Don't panic, generally this situation is that the meter that has been used for a long time will have this situation, indicating that the clock battery voltage is insufficient. That is, the battery inside is out of power, and after a long time, the meter will be slid in the middle of the stream. What should I do if my meter fails?

If there is an error in the general meter, the user does not need to deal with the fault by himself, and needs to ask a professional to deal with it, and only needs to pass the 95598 warranty. Because the meter is the asset of the power supply company, the power supply bureau will deal with or replace it free of charge if it fails. Problems with err-04 faults** in the meter:

1. If it happens for a short time, the power will be out. That is an indication of a short circuit or design issue inside the meter. 2. This situation can only be solved by the original factory.

Because once this battery is dead. It will lead to many problems such as wrong time scale for power accumulation, wrong storage location and so on. 3. After replacing the battery, you need to recalibrate the clock, and there is also the processing of lost data.

Error in the meterCommon faults**Explanation: err-01: Fault -- Control loop error.

err - 02: Fault --ESAM error, note that the card chip is - 03: Fault --Prepaid card initialization error.

ERR-04: Fault -- The battery is undervoltage and the battery inside the energy meter has no power. err - 05：

Failure -- an internal program error. ERR - 06: Fault -- Memory failure or corruption.