Windows 10 Enterprise How to connect to WIFI 10

Due to the incompatibility of the official version of win10 system with some network card drivers, the network speed may slow down some users who upgrade to win10 system. To do this, we need to install a compatible NIC driver with the help of an update. Open the "Drive Life" program, switch to the "Native Driver" tab, find the "Wireless NIC" or "Local NIC" driver, click the "Driver Version" list, and select "Stable Version" or "Latest Version" according to actual needs.

After the NIC driver is updated and upgraded, right-click the Network icon in the taskbar and select Network and Sharing Center from the right-click menu.

From the Network and Sharing Center interface that opens, click the "Change Adapter Settings" button in the upper left corner, then right-click the "Local Connection" or "Wireless Connection" icon you are using, and select the "Properties" item from its right-click menu.

Then from the "Local Connection Properties" or "Wireless Connection Properties" window that opens, click the "Configure" button.

From the Wi-Fi Configuration window that opens, switch to the Advanced tab, select the Bandwidth item, and change its value to 20MHz 40MHz Auto. This is used to improve the speed of win10 Internet access.

In addition, for the LAN network or the computer using wifi to access the Internet, the important reason for the slow network speed of the win10 system is the unreasonable distribution of the network speed. In this regard, we can use the "Jusheng network management" to improve the speed of the computer, and at the same time limit the speed of other computers in the local area network. Search directly in to get the ** address of the "Jusheng Network Management" program.

From the main interface of the program that opens, click the drop-down list on the right side of "Enable Monitoring", select one of the modes according to the structure and layout mode of your local area network, and click the "Enable Monitoring" button.

After all computers in the LAN are listed, check the "Select All" item, and you can monitor the "uplink" and "downlink" speeds of each computer in the LAN.

If you want to create a policy to restrict the Internet speed of a computer, you just need to double-click on the computer name and enter the policy name to create a new policy, where you will create a new policy called "Limit the Internet Speed of a Computer". On the policy page, switch to the Broadband Restrictions tab, select Enable Host Public Bandwidth Restrictions, set the uplink and downlink speeds, and click OK to apply the current policy to the corresponding computer.

Method steps.

1,Click on the small icon like a TV on the desktop,This icon is the icon of the win10 network,2,Click on a searched wireless network under WLAN in the window showing the network interface,Then click Connect。

3. Enter your wireless wifi password, this must be correct before it can be used.

4. Want to find computers, devices, and content on this network and automatically connect devices such as printers and TVs? One click is yes.

5. The connection is successful, and the wireless icon is connected, and you can access the Internet when you are connected.

Desktop?? Desktop plug in the network cable, if you want to connect to wifi, you can buy a wireless network card, and then install the driver, and then you can.

Does the computer have a wireless network card?

If there is a check under the drive.

If it's a laptop, see if the wireless switch is turned off. You can press (fn+f6) on your keyboard to turn it on.

Different laptops may not be the same. The F1-F10 keys will be marked with the wireless network. Now the new laptop has turned off the wifi network called airplane mode and the phone is called it.

Check whether the driver of the wireless network card is installed. The operation is shown in the following figure. If not, use the driver wizard network card driver version to install it.

Check that the WLAN autoconfig service is not enabled.

Check if the wireless card is disabled. On the desktop, right-click on the network--- Properties--- change the adapter settings--- here you can see whether the WLAN is disabled or not.

If the WAN is disabled, right-click on it to enable it.

Once it is successfully enabled, click on the connection Disconnect.

If you detect a wireless network, click to connect, enter the password and connect to use the wireless network.

Windows10 Connect WiFi Method:

2. Click the name of the WiFi SSID you want to connect to, and click "Connect" in the pop-up box

3. If you have a password, the password input window will pop up when you log in for the first time.

Windows 10 has the following 8 steps to connect WiFi:

1. First, select the taskbar and click the "wireless network icon".

2. Click the SSID name TP-Link for WiFi.

3. Enter the password of the wifi and click Next.

4. TP-LINK's wifi is successfully connected.

5. When the second connection, click the wireless network icon in the taskbar, and click the TP-Link wireless network icon in the pop-up dialog box.

6. TP-LINK's wifi is successfully connected.

7. Click Select taskbar and click Show Notification Icon.

8. Select and click the "wireless network icon" in the operation center to connect to wifi.

1) Open the settings panel.

First of all, click on the Windows logo in the bottom left corner of the Windows 10 system to open the start menu. Then click on "Settings" in the start menu.

2) Go to Network Settings.

After entering the settings interface of Windows 10, click "Network & Internet" to enter the interface of network settings.

3) Select WLAN settings.

After entering "Network and Internet" in Windows 10, click "WLAN" on the left to enter the WLAN setting interface.

4) Turn on the wireless network card.

Once you're in "WLAN", click the switch below the word "WLAN". Turn on the wireless card. However, if your device does not properly install the Wi-Fi card or its driver, it will fail to turn on.

5) Select a hotspot.

After turning on the wireless network card, a loading circle will be displayed next to the switch, which means that the Windows system is searching for nearby hotspots. Once you've searched for it, you'll see a list of available hotspots below. At this time, click on the hotspot you want to connect to, and click the "Connect" button after setting up the card.

6) Enter your password (optional).

If the hotspot you want to connect to doesn't have a password, it will be connected directly. If the hotspot has a password, the interface for entering the password will pop up, please enter the password first, and then click the "Next" button.

Win10 system to create a wireless connection method.

1. Press the "Win+X" key combination in the keyboard on the win10 desktop, then find the "Command Prompt (Administrator)" under the menu, and click it to open:

2. In the open cmd interface, enter: netsh wlan set hostednetwork mode=allow ssid=123456 key=123456789, and click enter.

The SSID is the hotspot name and the key is the hotspot password, as follows:

3. This password is a wifi password, and the length is 8 digits:

4. Enter netsh WLAN start hostednetwork to enable the hotspot.

5. After the hotspot is started, click "Change adapter settings" in the control panel, and the local connection created will be added, and finally you need to share this link in the properties of the wireless network.

Note: This hotspot is connected to the Internet through the computer, so the traffic is all counted on your computer, and if you connect more at the same time, if your computer is not well configured, it may affect your speed.

How to set up a broadband connection in Windows 10.

Does that mean I can connect to the Internet with other devices? This requires both a wired and wireless network card. Or two wireless network cards, one to connect to the network and one to transmit the AP.

Welcome to Henan Xinhua to visit and learn about computer technology, free trial courses, and reimbursement of travel expenses.