Blue Screen Issues 0x00000050 0xEB2A212C, 0X00000001, 0XBF034BF5, 0X00000000

This is hexadecimal**.

There are many blue screen problems: it is generally caused by the memory to replace the memory and try it, if it doesn't work, change the system, and the system will also be poisoned with a blue screen.

Hello, computer blue screen, mainly: "memory error" or "software incompatibility" caused!

1。Try to boot the computer, after the computer brand is missing, press F8, safe mode, cursor selection: the last correct configuration, enter, enter, press down! [Critical step].

2。No more, enter the safe mode, press enter, and after going to the desktop, antivirus software, full antivirus!

Quarantine" stuff, completely removed!

3。Reuse: 360 Security Guard, "Function Encyclopedia": "360 System First Aid Kit", Nazu.

Point: Start first aid! After restarting, click on the "File Recovery Area" and select all to completely delete the files!

System Repair, Select All, Fix Now! [Critical step].

Network Repair, Start Repair, Restart PC!

360 Security Guard, Scan Plugins, Clean Now! 360 Security Guard, System Repair, One-click Repair!

Kingsoft First Aid Kit], check: [Extended Scan], Scan Now, Process Now, Restart the computer!

4。If you can't do it again, unplug the graphics card and memory module, erase it, use a brush again, clean the slot dust and fan, replace the memory slot, etc.! [Desktop].

etc., uninstall the redundant, and only leave one, because similar software is not compatible with each other! [Critical step].

7。If it still doesn't work, you need to "one-click restore" or "reinstall the system"!

8。If there is a problem with the hardware, send it for repair!

Wipe memory. Replace the memory by wiping it first and then replacing it.

0x0000007e The specified module could not be found.

1: The system files are lost due to computer poisoning, and the system is reinstalled.

2: Reset the hard disk interface type APSI in Boos and recall the IDE on the line 3: What software is installed, the boot data of the system is modified, and the security mode cannot be entered.

Your computer is really dead, you look at Groundbreaking 3, there is a way.

85% of the blue screen of the computer is a problem with the software, you see if the driver you installed is compatible with your computer, and then see if the software you installed is normal, it is recommended to reinstall the system.

Most of the blue screen is a problem with the computer hardware, it may be that the memory module is in poor contact, open the main case, take off the memory module and wipe the part that contacts it with a rubber sassafras, and then install it well, be careful not to install it backwards and cause the memory module to burn out. Then check whether the cooling fan is effective in dissipating heat to the CPU. Okay, then turn on the computer and try again, the problem should be solved.

Stop Error Number: 0x0000007b Caption: inaccessi-ble-boot-device Usual Cause:

Failed to initialize the IO system (usually the boot device or file system). Workaround: Boot sector viruses usually cause this stop error.

Use the latest version of anti-virus software to check for viruses on your computer. If a virus is found, you must perform the necessary unsearchable removal from the computer, refer to the anti-virus software documentation to learn how to perform these steps. Remove all newly installed hardware (RAM, adapters, modems, etc.).

Check the Microsoft hardware compatibility list to make sure all hardware and drivers are compatible with Windows. If you are using an appropriate SCSI adapter, you can obtain the latest Windows drivers from the hardware vendor, disable synchronization negotiation for the SCSI device, check if the SCSI chain is terminated, and check the SCSI ID of the device, if you are not sure how to perform these steps, you can refer to the documentation for the hardware device. If you are using an IDE device, define the IDE port on the board as the only primary port.

Check the master-slave unique settings of the IDE device. Remove all IDE devices except the hard drive. If you are not sure how to do this, you can refer to the hardware documentation.

If your computer has been formatted with the NTFS file system, you can restart your computer and run the chkdsk fr command on the system partition. If the system cannot be started due to an error, then use the command console, and run the chkdsk r command. Run the chkdsk f command to determine if the file system is corrupted.

If Windows can't run the chkdsk command, move the drive to a different computer running Windows and run the chkdsk command on that drive from that computer.