How to configure the simplest fishing nest

Just put a bait in it.

Hello, it's not good to be cautious and only want to keep you waiting, there are two ways to fish for Lu Xiaoqing's nest, which are as follows: Formula 1: If you are equipped with 5 catties of materials:

2 kg of crushed corn, 1 kg of bulgar, 1 kg of wheat bran, 0 5 kg of wine rice, 0 5 kg of commercial nest material, a bottle of amino acids, a bag of yeast powder Soak the broken corn and steam it in a pot for 15 minutes, let it cool and set aside; Soak the bulgur in warm water, decant the water and set aside; Take 2 5 3 liters of warm water (must be lukewarm), add amino acids and yeast powder, dissolve and stir well, pour the wheat bran, mix well, then add steamed crushed corn and soaked wheat grains and add wine rice, mix well, and finally add commercial nest material! Mix again! After fully and evenly absorbing water, put it in a plastic bag and seal it, put it in the sun for 2 3 hours, and then put it in a cool place to dry, it can be used after 3 days, the best effect is a week, fishing with commercial bait or wine soaked corn kernels, and you can also use the wheat grains in the nest material to wear the hook to fish The nest material has special effects on crucian carp, carp, grass, and fishing other fish and water conditions around the world.

Recipe 2: Half a catty of sweet wine, 1 yuan, half a catty of corn ballast 0 8 yuan, half a catty of wheat 1 yuan, (wheat is boiled in a pressure cooker until flowering, and corn ballast is also steamed in a pressure cooker), half a catty of bran 0 5 yuan, half a pack of dry yeast 0 4 yuan, and half a catty of peanut bran 0 75 yuan (add peanut bran to increase some viscosity), total: **4 45 yuan It can be fermented in one hour with dry yeast But I think it may be better to put it for a longer time I want to do it on the first day and go out fishing on the third day After beating the nest, the rest of the nest is used to throw the sea rod, it feels good, the taste is great, and if there are amino acids, it will be better earlier.

The easiest way to fish for a nest:

1. Use the warming habits of fish to find fish nests.

The vast majority of freshwater fish are cold-blooded, that is, ectotherms, they are hermetic, very sensitive to temperature changes, and can always find the most suitable area of water temperature in the water body, and move and forage nearby.

2. Use the aerobic habit of fish to find fish nests.

All freshwater fish have the habit of aerogenism, and the life activities of fish are inseparable from oxygen, and the higher the dissolved oxygen content in the water, the more alive the fish will be. At the entrance of the water, there is a steady flow of live water, and the dissolved oxygen content in the water will be higher than that of other oxygens, and it is also the easiest place for fish to gather.

3. Look for fish nests in relatively safe areas.

Fish are more vigilant, have the characteristics of seeking advantages and avoiding harm, sell round limbs like to hide in the complex underwater environment area, when in danger, can quickly escape and hide. Therefore, the area with more complex underwater topography and more obstacles is often the area where there are more hidden fish than in the Middle Ages, because there is enough security to be gained in this area.

4. Look for fish nests in places where there is plenty of food.

Whether fishing in a black pit or in the wild, if you have enough food, it is easy to form a fish nest. Fish are foraging for food every day except for rest, or on the way to feed. In natural waters, areas such as the vicinity of aquatic weeds, crop fields, and upstream inlets are areas where there is a lot of food, and it is easy for schools of fish to gather here.

<> fishing to find a nest is generally found through plants, oxygen, etc., and the location with more plants and oxygen is generally a fish nest, and the effect of fishing is better. However, sometimes the situation in the water is more complicated, and it is not easy to find through these two aspects. In this case, an easier way is to look directly at the bubbles in the water.

Fish will spit bubbles when they are active in the water, and more bubbles indicate that there are more fish, and fishing in a place with many bubbles is easy to succeed.

This method is relatively simple, and conclusions can be drawn through intuitive observation. In addition, there is a relatively easy way to observe the situation directly on the shore, and fish directly in the spot where other anglers often fish, where it is also likely to be a fish nest. In particular, the more skilled anglers often fish in a location that is very likely to be a fish nest, and it may be good to fish directly here.

1. Master the habits of fish.

No matter what kind of fish it is, it has its own living habits, such as perching in, in, foraging, etc., some fish will be more active in high temperatures, some fish are very tolerant to low oxygen, and some fish like dim places, etc., and these living habits will directly lead to different water layers and depths where fish inhabit. Then there are their different taste preferences, which can also cause them to forage in different locations.

2. The influence of weather on fish conditions.

In addition to the natural habits of fish, there may be an influence of the external environment on it, thus changing its living habits. For example, the temperature will have different characteristics in different seasons, just like the temperature that affects the fish situation the most in spring and winter, at this time they will run to the deep water to avoid the cold, but if they encounter a continuous period of high temperature weather, they will swim to the shallow water to bask in the sun, some experienced anglers are based on the characteristics of the current season, and then in combination with the temperature in recent days to judge and choose the right fishing position.

Rough bottoming: Install the fishing rod, fish drift, fishing line, figure-of-eight ring and other tools, repeatedly throw out the fishing group, and observe the state of the waters. Find out closer:

Prepare some rubber instead of bait and hang it on the hook to try to find the bottom. At this point, the eraser can be attached to the upper hook or to the lower hook. Finding the bottom of it:

It is carried out on the basis of careful search. Remove the eraser and throw the hook out to see how many fish float out of the water. When it is similar to the tune, it means that the bottom finding is complete.

In the process of fishing, there are many steps, and finding the bottom is one of the key steps. Bottoming is actually a step for anglers to have a general understanding of the water conditions, which is generally divided into the following three steps:

1. Rough bottoming: Rough bottoming is also rough bottoming, and a general understanding of the depth of the waters. At this time, you need to prepare the appropriate fishing rig first, such as fishing rods, fish floats, fishing lines, figure-of-eight rings, etc.

Then, you need to tie the splayed ring to the hook and tie the lead skin to the lead base. It is important to note that the weight of the lead skin needs to be greater than the buoyancy of the float so that the float can sink into the water and let the angler know the state of the water. The action of throwing out the rig is repeated to give the angler a general idea of the water conditions.

2. Finding the bottom carefully: Finding the bottom is also a slightly detailed process, which is carried out on the basis of rough bottoming. At this time, there are many issues that need to be paid attention to.

For example, heavy lead cannot be used directly, otherwise the lead sinker will sink directly into the silt, resulting in inaccurate results of bottoming. For example, it is best not to use bait directly to find the bottom, because the bait will atomize and lose in the water. Therefore, it is better to prepare some erasers, they will not be lost in the water, and the results of bottoming are relatively more appropriate.

At this point, the eraser can be hung on the upper hook or on the lower hook.

3. Finding the bottom: The last is to find the bottom, which also needs to be carried out on the basis of the results of the detailed bottoming. Since there will be errors in the use of erasers, it also needs a process of precise bottoming.

At this point, you need to remove the rubber hanging from the hook and throw the empty hook into the water to see the tail of the float come out of the water. If this mesh number is about the same as the mesh adjustment, then it means that the process of accurate bottom finding is completed.

As mentioned above, in the process of fishing, finding the bottom is a more important step, and another more important step is to raise a nest, specifically to protect or maintain the nest that has been laid. First of all, after the nest is made, you can't fish immediately, but you need to wait for a period of time to let the nest material fully diverge before fishing. Also, don't panic when fishing.

That is to say, when the fish are first tempted, do not alarm them at will, otherwise the nest will be easily destroyed by the fish. The second is to make up the nest, after the nest material is insufficient, it needs to be replenished in time, otherwise there will be loss.

In winter, you can use wine rice for fishing and nesting (that is, millet soaked in koji wine), and it is generally better to use bloodworms for bait. Main crucian carp fishing. Because crucian carp eats above 0 degrees.

It's just that the crucian carp eats lightly in cold weather, and the general float can't be too sensitive or too toned. It's basically a tune of four and a tune of four. Generally, it has to be judged on the basis of the field.