Ask for advice What is the difference between electric grinding, table grinding, hanging grinding, a

First, the concentricity of operation is different.

1. The quality of the electric grinding is unstable and the concentricity is poor.

2. Due to the congenital deficiency of the structure of the table mill, the concentricity is poor.

3. The power of the lifting mill is large and the concentricity is good.

4. The dental machine has high speed and high concentricity.

Second, the control is different.

1. The electric grinding handle is thick and not easy to control.

2. The table mill is a flexible shaft, which is not easy to operate.

3. When the lifting mill is used, there must be a hook to hang, and the handle is inconvenient to control.

4. The operation of the dental machine is convenient and flexible.

Three, ** different.

1. The electric mill is generally cheap to more than 100 yuan.

2. The table mill is more than 200-300 yuan, which is slightly higher than the electric mill.

3. The hanging mill is more than 200-400 yuan, which is slightly higher than that of the electric mill.

4. The price of dental machine is high, mostly more than 400 yuan, which is higher than that of electric grinding, table grinding and hanging grinding.

Selection comparison: The power of the hanging mill is large, and the concentricity is also good, but the hanging is troublesome and noisy, which is suitable for the use of studios and large carved parts.

The tooth machine can play a role in the carving of the details, which is easy to operate, and is functionally better than the table mill and electric grinder, but it is slightly higher.

Reference Encyclopedia - Electric Mill"> Encyclopedia - Electric Mill.

Self-improvement key Meng is Hao Mei.

Electric grinder, table grinder, hanging grinder, tooth machine. Table grinding and hanging grinding are actually electric grinding and electric grinding tools. It's just that the shape is different, the hanging is the hanging mill, the desktop is called the table mill, and there are also differences such as angle grinding and straight grinding.

Hanging mill: because of the motor problem, the noise is high. The flexible shaft of stainless steel will shake.

The fuselage is generally electrostatic. When using, it is best to make an insulated septum for the handle. The original foot pedal can be adjusted, but the speed cannot be fixed.

It is best to have hands-on ability, and it is best to modify it to adjust the speed, which can reduce the fatigue of the soles of the feet. I think it is suitable for rough rough roughing of hardwood. The advantage of hanging grinding is that the basic heat is not large now.

The price is reasonable. The advantage of the dental machine is that there is no noise when idling. The heat generation of the handle is low after using it for a long time.

But the host heats up a lot. For long-term use, it must be treated with fan air cooling. Otherwise.

If the host is overheated, it will stop working for cooling protection. The same is true for overheating protection in some hair dryers. In addition, handle bearings are often used and need to be replaced.

Otherwise there will be erratic noise. The advantage of the dental machine is that it does not tremble, it is stable, and it is suitable for detailed repairs. But some of them are not as nimble and crisp as knives.

The dental machine is expensive, the dental machine was originally a dental equipment (eliminated), used to polish dentures, and the torque of the speed block will not grind off a large piece at once.

The quality of the electric grinding is poor, the speed is low, the torque is average, and the volume is large and unstable.

The table mill has large torque, low speed, large volume, and requires unstable flexible shaft.

There is no difference between the hanging mold and the table mill, and the flexible shaft is also needed, but it is just hoisted.

Now the best engraving equipment, I think it is still a dental machine.

I am now using a 50 yuan hanging mill, I suggest you don't have to think about the hanging grinding. It can also be used, but the scalability is not strong, and after getting started, I feel that the hanging grinding is too inferior. Personally, the electric grinding should be some electric carving and grinding tools, the big one is called the electric grinder, and the small one is called the table grinder, hanging grinder, tooth machine, etc., which should be a general name.

The noise is small or the tooth machine, the tooth machine is suitable for making small things, and the table grinding is also more suitable. See how you use it. To make small things, I personally feel that the table mill + flexible shaft is enough.

If you make something big, it's a chain saw + a large electric mill. In addition, the large electric mill does not have speed regulation, and it will rotate violently as soon as it is opened.

I have electric grinding, table grinding, hanging grinding, tooth machine, the best one to use is Shixin 204 tooth machine, it is recommended to buy a dental machine, ** is not expensive, the grinding head is matched by itself. Spherical, tapered, mace, trapezoidal as you like, which work is refreshing.

Making large ornaments is called electric grinding, making small pendants is called electronic machines, and electric grinding is divided into angle grinding and straight grinding. The table mill is Suzhou machine, Suzhou car, flat knitting machine. Both the grinding mill and the gong machine are used for lifting with a soft connection.

As for the good control, it depends entirely on what kind of machine the individual is good at. Look at you to make small ornaments and brands, buy flat knitting machines (carving essentials, embryo beating necessities, shape necessities) buy electronic machines, and fine carving.