Can I install a radiator made of mild steel at home?

Radiator heating has become a fashion trend of modern home life, at present, there are many kinds of radiators, common types of radiators are mild steel radiators, aluminum radiators, copper radiators, copper-aluminum composite radiators. Among the many types of radiators, low-carbon steel radiators have beautiful colors, unique shapes and novel styles, and have always been loved by heating groups.

Precautions: The pipes used in the low-carbon steel radiator are mostly wall thickness, and the inner wall must be anti-corrosion for the heating system with poor water quality. Therefore, when buying mild steel radiators, choose thick-walled pipes with anti-corrosion coating or wall thickness.

Steel radiators are all mild steel radiators, which can be installed in the home, right.

Advantages of mild steel radiators:

1.Efficient heating: the water flow is large, its water resistance is very small, the energy consumed is less, and the convection heat dissipation mode is adopted, which has a high efficiency for raising the temperature.

2.Strong comfort: made of steel material, it has the characteristics of macromolecules, suitable for the penetration of water molecules, and there is no obvious dryness in use.

3.Easy to clean: The surface is made of steel, which is easy to clean and does not accumulate dust.

4.Environmental protection and health: fast heating speed, low-carbon environmental protection, no damage to human health, no peculiar smell in high temperature environment.

Disadvantages of mild steel radiators.

Mild steel radiators, water quality has a greater impact on the life span, therefore, the use of increased wall thickness, internal anti-corrosion coating to alleviate, but the symptoms but not the root cause. To choose such products, it is best to choose brand-name products, although the highest point, but the quality and after-sales are guaranteed. Pay attention to full water maintenance during the use of non-heating period, which can appropriately extend the service life.

We know that the steel radiator is a very important member of the new radiator, then it is made of some high-quality cold-rolled low-carbon steel through modern production technology, it has some beautiful appearance, and then a variety of colors, as well as some characteristics of high heating efficiency, energy saving and environmental protection and long service life, because of these it itself is lacking some anti-corrosion, then many manufacturers will carry out internal anti-corrosion treatment for this steel radiator, Therefore, its entire performance and instructions for use are largely determined by the level of this antiseptic technology. So for many families who need to use these heating equipment, they usually also consider which brand of steel radiator is the same, first, steel radiator quality analysis.

So if we want to know which brand of steel radiator is the best problem, we need to have a certain understanding of these steel radiators, so first of all, we know that the heat dissipation efficiency of this radiator is relatively high, and its heat dissipation is also relatively large, compared with the traditional cast iron is able to get a good improvement, it is a short time to make the temperature of the whole room rise, usually within 20 minutes they will warm up, And its whole shape is also particularly beautiful, simple and elegant, and its radiator uses a method of radiation plus convection.

Second, the steel radiator has additional functions.

At the same time, it also has more additional functions, so when we choose these brands, we must make more comparisons or more considerations, so we know that there are a lot of brands of this radiator on the market now, so we can understand more about them, so that we can know more clearly about his knowledge of these products, and at the same time, we can make a better analysis according to some actual conditions of our own homes, or living environment, so as to choose some more suitable brands, so that they can have a better living environment.

So the above is about which brand of steel radiator, then through the above can be seen, now in the market of various brands are very many, and generally speaking, this kind of regular brand it not only attaches importance to the product, at the same time he also attaches great importance to a variety of early research and development and their installation scheme design, as well as post-construction and tracking after-sales service and other services, to provide these users with more effective fast or professional services, and at the same time can better ensure the quality of installation, Then we can choose these formal and qualified manufacturers more targeted when choosing, so that we can find some more reliable quality.

The key to choosing a mild steel radiator is the quality of anti-corrosion performance. When consumers choose, it is necessary to see whether it is a professional anti-corrosion, and it cannot be judged that the quality of the inner anti-corrosion layer of the too cheap radiator is unqualified. Generally, the internal anti-corrosion material of the regular brand radiator is driven into it by high pressure, without dead angles and bubbles, and has good anti-corrosion; The inner anti-corrosion layer of the small brand radiator is poured into it by hand, and there are dead corners, bubbles, etc., and the anti-corrosion is poor.

The steps of radiator installation are similar, and generally the radiator installation is operated by professionals, and you should never install it yourself.

Mild steel radiator installation Note: Do not strongly collide with the radiator and pipe during use.

Although the mild steel radiator itself has a certain compressive resistance, strong blows and collisions will still cause surface pits, scratches, and even loopholes, resulting in water leakage. Secondly, try to maintain a certain amount of heat dissipation space near the radiator in the room. Do not pile up debris on or in front of the radiator, otherwise it will affect the heat dissipation effect of the radiator.