How to set up the router IP address and DNS

Or the network cable directly connected to the home is connected to the WAN port of the wireless router, and the computer is connected to the LAN port of the wireless router with a network cable.

2.The computer network card is manually set (take the gateway as an example, other gateways, change the IP address and the second digit on the right of the gateway accordingly).

DNS: Fill in the DNS of your local broadband, you don't need to fill it in when setting it.

Then enter the browser to enter the wireless routing settings page, the default username and password are amdin, and the username and password are in the routing manual or behind.

3.In the WAN settings or Internet settings page in the routing settings (you can also set it according to the guidance), fill in your home broadband Internet account and password respectively, and set the connection mode to "PPPoe". If there are gateways and primary and secondary DNS fields, it is best to fill them in manually.

4.Enable DHCP to automatically assign IP, enable wireless function and set wireless key. Select the wireless protocol of WPA or WPA2 (you can also change the name of the wireless SSD yourself, that is, you can customize a wireless network name to make it easier for you to identify).

After this is set, save and restart the route, enter the route settings page again, and check the route status in the status bar to see if it has been connected to the Internet normally. After confirming that it is connected, all wireless devices can search for the wireless network, enter the correct wireless key, and you can access the Internet wirelessly.

Why should you set up a router IP address and DNS?

1.Before changing the DNS, we need to know what our DNS server address is, so how do we query our DNS server address?

Find "Run" in "Start" (or directly [Win] + [R]), and then enter "cmd" to enter the administrator operation interface

2.Enter the command: ipconfig all in the admin interface and press enter to confirm that the windows ip configuration will be displayed, where we can see our dns server address.

3.If you are connected to a route, you can also check your DNS server address through the route, enter the address in the browser to pop up the router login dialog box, usually the default account password of the router is: admin (can be modified after login).

After logging in to the route, we can view the DNS server address on the homepage.

4.Knowing the DNS address, we can modify it, click the connection icon in the lower right corner of the computer, select "Open Network and Sharing Center", and of course, you can also enter "Open Network and Sharing Center" in the control panel "Network and Internet":

5.After entering the "Network and Sharing Center", we click "Local Connection" to enter the "Local Connection Status" dialog box

6.Click the "Properties" option in the "Local Connection Status" dialog box to pop up the "Local Connection Properties" dialog box

7.Here we select "Internet Protocol Version 4 (ICP IPv4)" in the Local Connection Properties dialog box, double-click the latter to select the properties below, and then you can enter the "Internet Protocol Version 4 (ICP IPv4) Properties Dialog", where you can change the DNS settings.

8.In the "Internet Protocol Version 4 Properties" dialog box, you can change the DNS address, check "Use the following DNS server address", then the DNS address becomes available, and then fill in the DNS address we see and confirm it.

DNS server (P) is preferred

Alternate DNS server (A).

In addition to the router settings, the IP address and DNS settings are the most prominent, and by checking and setting the IP address and DNS domain name server, problems such as not being able to access the Internet and web pages can usually be solved. Here are some ways to set up your router's IP address and DNS, I hope it will be helpful to you!

How to set the router's IP address and DNS

Take JCG smart wireless router as an example, you can enter the router settings page, go to "Network Settings" - "LAN" to view the IP address information of the LAN, note that the subnet mask and default gateway need to be set correctly, and the IP address needs to be in the same network segment as the router LAN (generally the last digit of the IP address cannot be the same).

DNS domain name server generally fill in the same IP address as the default gateway of the router, if there is a situation that QQ can be on, the web page can not be opened, you can also use the DNS server obtained by the router to set the DNS of the computer, enter the router's "system information" - "running status" you can view the name server information of the WAN, and fill in the DNS domain name server settings of the computer in turn.

After the setup is complete, you can view and verify that the IP address and DNS settings are correct in the Details window of the Local Connection Status of the Network and Sharing Center. In the "DHCP Enabled" section, you can check whether the IP address of the computer is manually specified by yourself or automatically obtained through the router using DHCP.

Of course, you can also check the IP address and DNS nameservers in the Windows command prompt. Open the command prompt and type the "ipconfig all" command to view it. In the "DHCP Enabled" section, you can check whether the IP address of the computer is manually specified by yourself or automatically obtained through the router using DHCP.

1. Open the browser, enter " in the ** bar, enter the router to set the base, and enter the password to enter.

2. After entering the router settings, scroll down to find "Route Settings".

3. Click "Route Settings" to enter the options of route settings.

4. Click "DHCP Server" on the left directly to enter.

5. Find the preferred DNS server, we can call the local broadband and ask for the local DNS server address.

6. Finally, click "Save", and then it's set.

If you are still using the default router DNS, if you feel that the local domain name is not so stable, then it is necessary to change the default DNS to enhance the stability of the domain name. The stability of domain names is related to the stability of local applications, especially applications that need to pay attention to a stable environment. Here are some of the router DNS settings I have compiled for you, I hope it will be helpful to you!

How to set the router DNS

There is a DNS in the router, which can manage the internal network domain name resolution of the router by default.

By default, it is assigned by the network operator and is generally not very stable.

Modifications can be made.

Network Parameters - WAN Port Settings - Advanced Tomb Concealment.

Manually set up a DNS server and save it. The DNS of the route can be modified. At present, it is recommended to use Alibaba Cloud in China.

Public DNS is more stable than telecom public DNS. And the default DNS resolution.

There are often forced pop-ups when surfing the Internet.

Advertisement appears in the bottom right corner.

If the IP address assigned to the router is a dynamic public IP address

Due to the change of IP address, the external network will be affected.

Access the intranet. Availability of the app.

The dynamic public IP problem can be solved through the nat123 dynamic disadvantage domain name resolution method. After dynamically resolving the domain name, it can be published and applied to the Internet, ignoring the change of public IP address.

After dynamic parsing, you can intuitively see the real-time local public IP address. When the local public IP address changes, the dynamic resolution is also real-time.

In the private network environment, the router is assigned a private IP address and does not even have route management permissions. You can use the nat123 port mapping method to publish applications for public network access.

End people who read "How to set up router DNS" also read.

1.How to set up the router DNS.

2.How to set the router DNS.

3.Feixun.

How to configure the router DNS.

4.How to fill in the DNS in the router?

5.How to view and modify the router DNS settings.

6.How does the router modify the DNS server?

7.What should I do if the router DNS is abnormal?

8.How to set up unlimited router DNS.

9.How to set DNS settings for tplink?

10.How to set up DNS for tplink

First open the browser, then enter in the ** bar, and then press the enter key to confirm the opening, and then the router login interface will pop up; The following is how to set up DNS on the router that I have compiled and shared for you, welcome to read and reference.

How does the router set up DNS

1. First open the browser, then enter in the ** bar, and then press the enter key to confirm the opening, and then the router login interface will pop up;

2. After that, we enter the router login username and password, the default login username and password of the TP-Link router are admin, after the entry is completed, click the confirmation at the bottom to enter the router settings, as shown in the following figure:

3. After entering the router settings interface, then we click on the left side of the "Network Parameters" for more settings, and then you can see the "WAN port settings" option, and then we click on the left side. The WAN port settings can display the status of the current dial-up connection as shown in the following figure:

The WAN port setting page of the router.

4. As shown in the figure above, there is also an "Advanced Settings" entry at the bottom of the Shixian WAN port setting interface, and we can click to enter the router DNS setting interface, as shown below:

5. If we want to set the DNS address, we only need to check the "Manually set the DNS server", and then fill in the DNS address that needs to be set behind the DNS server and the standby DNS server.