Can anyone tell how to discern the hardware driver

Check whether the NIC channel of the computer is installed through the following two points:

1. Look at the device manager that comes with the system.

Step 1: Right-click on "Computer" on the desktop, find "Manage" or "Device Manager" in the window that appears and click to enter.

Step 2: Click on the "Device Manager" option to enter. If you click on the "Device Manager" option directly on the desktop, then this step can be skipped.

Step 3: Find the "Network Adapter" option here and tap on it. If the NIC model is not displayed in this option, it means that the NIC driver is not installed or installed incorrectly.

If a yellow exclamation mark appears on the NIC, it also indicates that the driver is installed incorrectly.

2. Achieved through software.

Driver Wizard, which is a very commonly used driver installation software, is enough for general use.

Step 3: After the test, go to the "Driver Management" column to check the drivers of each hardware.

Right-click on the desktop computer, management, device manager, if there is an exclamation mark, it shows that the unknown device is no driver.

Drivers can be updated using third-party software.

2. Find "Hardware Detection" in the toolbox.

3. Click "Driver Installation" in the hardware test.

4. You can see the "installation status", if it is not installed, you can click to install it directly.

Right-click on my computer - open "Manage" - select Device Manager, check if there is an exclamation mark in the device, no exclamation mark means that the driver is installed.

View driver: 1. Click "Start" in the lower left corner of the desktop and select "Run". 2. In the control panel.

click on your Mac, select Hardware & Sound. 3. Under Devices & Printers, select "Device Manager."

4. After clicking in, you can see all the drivers in the pop-up window. 5. If you want to view the specific information of a driver, select the driver and then right-click and select "Properties".

2. View Service 1. Click "Start" and select "Run" in Qingpai. 2. In the pop-up window, enter ".

command, and then click OK to close the window. 3. Wait for a few seconds to see all the services in the pop-up window. 4. If you want to see the specific information of a service, select the service and right-click and select "Properties".

Here's how to view all the services and drivers on your computer. the method of viewing the Services; Method 1: Start->Run-> Enter Command-> Enter to enter the service window of the system and see all service options.

Method 2: Start - > Control Panel - > Management Tools - > Services, and you can also see all service options. See how to drive:

Method 1: 1) Desktop "My Computer" or "Computer" right-click - > Properties - > Hardware - > Device Manager, which is a list of all hardware devices, 2) To view which hardware driver, right-click on its item - > Properties - > Driver Answer Envy Program.

Driver details, you will be able to see all the driver files for this hardware. Fangzi Wang Method 2: 1) Start - > Control Panel - > System - > Hardware - > Device Manager, the back, the same as step 2 above.

There are three commonly used ways to view the driver software, 1) use Windows Optimizer, 2) use Kingsoft Guardian's software management function, 3) View in Start Menu - Settings - Control Panel - Delete or Add Programs.

The next driver wizard can be viewed and the latest driver can be automatically detected and installed.

With the help of third-party software, such as Driver Life or Driver Genie, etc.

1. Install the driver life and calculate the program.

2. You can see the version of the driver in the "Native Driver" tab, see the figure below.

Click Start Run DXDIAG

The English name is "device."

driver", the full name of "device driver" is a special program that can make the computer and the device communicate, yes.

It is said that it is equivalent to the interface of hardware, and the operating system can only control the work of the hardware device through this interface, and if the driver of a device is not installed correctly, it will not work properly.

As a result, the driver is known as "".

"The soul of hardware", "The master of hardware", and "The bridge between hardware and systems", etc. Generally, the computer needs to have a driver installed in order to use the device normally.

Any hardware device of the computer must be driven, such as motherboard drivers, graphics card drivers, sound card drivers, network card drivers, and so on.

You don't need to check the model to install the hardware driver, and during the installation of the system with the ghost system disk, the corresponding driver will be automatically recognized for the hardware and installed.

There are two ways to view the hardware model:

One is to use the system's built-in method to view, that is, right-click "My Computer", select "Properties", and click "Device Manager" to view, but the information obtained by this method is not detailed. As shown below: