Rookie asks for help from the server, please help

A server, also known as a server, is a device that provides computing services. Since the server needs to respond to and process service requests, the server should generally have the ability to undertake and guarantee services.

The composition of the server includes processors, hard disks, memory, system buses, etc., which is similar to the general computer architecture, but due to the need to provide highly reliable services, it has high requirements in terms of processing power, stability, reliability, security, scalability, and manageability.

In the network environment, according to the different types of services provided by the server, it is divided into file server, database server, application server, web server, etc.

First of all: it could be a problem with the hardware of the server itself.

1.It could be that an error occurred on the motherboard.

2.It could be that a hard drive error has occurred.

3.It could be that a hard drive error has occurred.

4.It could be a fan failure, and secondly, there could be a problem with the network the server is on.

Network outages, network broadband, network signals, temporary catastrophic network problems.

Finally: it may be that there is a problem with the system, and the system needs to be inspected and repaired.

Don't be in a hurry when you encounter this situation, take your time, the server error can be checked according to the following conditions.

1.Check your network to see if it's a problem with your network.

2.Check the device you're connecting to the server to see if there's something that's causing the server error.

3.If it's okay, it is recommended that you contact your server service provider to help you check to see if there is a problem with the hardware**.

An error occurred on the BRD motherboard.

A hardware configuration error occurred at cnfg.

A hard drive error occurred in DASD.

fan fan is malfunctioning, or it is running too slowly, or.

The fan has been removed. The temp indicator may also be lit.

Bright. link is reserved.

log The error message has been written to the system event log. View the IMM system event log and system error log for information about errors.

MEM When the MEM indicator is lit, it means that it has occurred.

Memory error.

When the MEM indicator and CNFG indicator are lit.

, the memory configuration is invalid.

o v e r spec

Due to a power overload on one of the power channels.

so shut down the server. The power of the power supply exceeds the maximum.

Large ratings. ps The power supply has failed. Age nucleus.

There was an error with the RAID array.

The SP Service Processor (IMM) has failed.

The temp system temperature has exceeded the threshold level. Faulty wind.

The fan causes the temp indicator to light up.

VRM module.

ServerAid Manger, install under Windows, **The latest version is OK, older versions may need to restart the server after installation to see the array information.

Is yours a new computer? Processed with the exclusion method.

The first thing to see if the CPU fan is rotating.

Secondly, if you have a small light on the motherboard, there is a possibility that the motherboard has a problem, if you have no small lights on the motherboard, you can unplug your power connector, and then short connect the green wire and black wire on your power supply, to see if the power supply fan is rotating, if it is rotating, then it may be that you have a problem with the motherboard, if not, then you have a problem with the power supply.

Again, after pressing the power switch of the host, the CPU fan is running normally, the motherboard is not working, and the indicators of the hard disk and power supply are on, at this time, unplug the CMOS battery to see if the motherboard can start normally, at this time, it can be determined that the motherboard battery has a problem and needs to be replaced.

Finally, some motherboards have an auto-detection protection function, which will automatically lock and stop working when the power supply voltage is abnormal, or the CPU is overclocked, or the adjustment voltage is too high. The performance is that the motherboard does not start, at this time, you can discharge the CMOS and then power it up, and some motherboards need to press and hold the reset button to unlock when turning on the motherboard.

Hello, you didn't pass the POST. It's a hardware issue. Disassemble the chassis, remove the memory and graphics card, clean it, and reinstall it again.

If it still doesn't work, it may be broken, and you have to change the accessories to try it.

I choose to be satisfied.

Can I self-test after turning on the machine?

Are the motherboard lights, fans, etc. working properly?

This is that the host is not turned on.,See if the memory is loose.,Waiting for a test one by one may be a small problem.。

You see if the switch on the display screen is turned on, maybe the display switch is not on.

There are a lot of problems on the host as you mentioned, but you can also take off the memory and re-insert it, and try the graphics card again, which you can solve by yourself, if not, then you can only find a repair computer.