What to do if the foot washing wooden basin is cracked, and what to do if the foot soaking wooden ba

You can find a wire hoop to put it up.

If it is only a slight seepage, it can be filled with water and blistered, and it will not leak in a day, and many wooden basins are cracked because of long-term idleness.

Generally speaking, as long as you choose a merchant with quality assurance, the foot washing wooden basin has undergone strict factory inspection, so the general crack problem does not exist, but just in case, it is better to check it after purchasing.

Pay attention to washing the wooden barrel after use, because the nature of the wood itself determines that it will expand and contract, so it should be placed in a cool and dry place to avoid direct sunlight.

Filling or fastening.

1. Put the wooden basin flat on the ground, fill the crack with wood powder or special repair materials, and pave the surface, 2. After the surface is flattened, if it is repaired with wood powder, it is necessary to use 502 glue to drip into the gap from top to bottom, (with repair materials can not be used);

3. After the glue is dry, polish it with 240 flat sand until the surface is flat, and use a special color correction pen to repair the color;

4. Use No. 1500 water sandpaper to polish and smooth, and finally paint 2-3 times with self-spraying paint.

5. If the wooden basin has a serious disconnection, the barrel hoop can be removed, truncated, and re-welded and installed.

1. Soak the bathtub in water for 2 3 hours, wait for natural air drying, fill the gap with sawdust and sawdust, and then seal it with 502 or 302 glue on both sides of the gap, and polish it smooth with fine sandpaper.

2. Or use resin glue mixed with sawdust to fill and smooth the gaps.

3. If you feel that sawdust is difficult to find, or you feel that the glue is too hard and not elastic, you can use glass glue to fill.

4. The iron hoop that is loosened due to the shrinkage of the bathtub should be re-tightened and fixed with glue.

5. You can brush a layer of tung oil in the summer, dry it and put it away.

1. The wooden footbath should be glued, and the all-purpose glue can be used after it is completely dried, but generally speaking, the wooden barrel will expand after being thoroughly moistened, and the leaking part will be naturally blocked.

Second, the maintenance of the wooden footbath:

1. Generally, the wooden footbath, if used frequently, will not crack, and the hoop will not loosen, but if it is not used for a long time, the wooden footbath may have problems such as cracking, and it needs to be used persistently to keep it moist.

2. If you do not use a foot washbasin, if there is a problem with drying, you can use tung oil to care, if there are some small problems, you can use sawdust and other tung oil, and then stir and plug it in the gap, if it is an overall crack, you should adjust the hoop net tightly.

3. The general care after use is to add tung oil, if not, you can use wax, after all the polishing, let the sun dry, so that the wax will all enter the wood, which is also a way. Then put it in a cool place and cover it with a bag for maintenance.

No need to make it up. It is dry and columned. You soak it in water for a few hours and it won't leak. Be sure to store water in the basin after use. Prevents dry-cracking. Please adopt.

The wooden pot glue is mainly dry and cracked, and it is necessary to blister it with water after fixing it with glue, and it will be okay if the wood swells up after blistering for a long time, and the wooden pot should be blistered frequently. Hope that helps.

I also made up for a gasp and threw it away.

After gluing it with white latex, it can be used in a few days.

Use that kind of large nails, not glue.

Summary. Dear, I'm glad to answer for you: The cracking method of the wooden foot bath is as follows:

Small cracks can be bubbled with water, large cracks have to be repaired, one is to let the manufacturer repair, and the other is to repair themselves, with putty powder mixed with 302 glue, the ratio is 2:1, the effect is good, or directly mixed with resin glue or latex to repair. The barrel should also be soaked in water frequently when not in use to prevent the barrel from drying out.

The foot-washing wooden basin is made by a wood craftsman using wood and wooden blocks through multiple processes. Generally, it can be used to fill water or other liquids, because of its good thermal insulation performance, so the ancient people like to use it to soak their feet, but now people rarely see it or use it to make feet, but as people's living standards are getting better and better, people pay more and more attention to physical fitness, and gradually rise up to soak feet in wooden barrels.

There is a gap of more than a centimeter.

Dear, I'm glad to answer for you: the cracking method of the wooden foot bath is as follows: the cracks are small and can be bubbled with water, and the cracks have to be repaired if the cracks are large

1 can be, the effect is good, or directly mixed with resin glue or latex supplement. The barrel should also be soaked in water frequently when not in use to prevent the barrel from drying out. The foot-washing wooden basin is made by a wood craftsman using wood and wooden blocks through multiple processes.

Generally, it can be used to fill water or other liquids, because of its good thermal insulation performance, so the ancient people liked and enjoyed to use it to soak their feet, but now people rarely see it or use it to make feet, but as people's living standards are getting better and better, people pay more and more attention to the body and grandchildren, and gradually rise to soak the feet in wooden barrels.