Urgent! Add one third of the water to the antifreeze 10 points .

I don't know what you mean by adding one-third of water, one-third of a bottle of ordinary mineral water, or one-third of all water in a tank of 2.

If it's 1, there's no problem.

If it is 2 This case, then it is recommended that you go and change the water, because filling the water tank with too much pure water may cause limescale to form inside the water tank, and it will block the water channel for a long time, causing the engine to overheat, and the water tank is unlikely to freeze at minus 10 degrees, because the freezing point of Chevrolet's special antifreeze is minus 36 degrees, and the boiling point is 108 degrees Celsius

The process of replacing the antifreeze is very simple, just remove the sewer pipe connected to the engine on the water tank, and the Seo has no drain hole, so you can only remove the water pipe.

There must be a danger of freezing, last winter we had a car water tank and circulation pipeline frozen, after starting, due to the engine heat, but the pipeline was blocked by ice, and the result was too much pressure to collapse the interface. It's dangerous, so let's go to the store and change the antifreeze.

It will be more troublesome to replace it yourself, because the antifreeze will enter the entire cooling system, so it is not possible to replace the antifreeze in which jar alone, it is recommended to go to the 4S store to change, if possible, you should also find that person, because the method of adding water in a professional store is not advisable, and antifreeze will generally be added.

Remove the screws at the bottom of the water, and when the water is almost finished, you can use the car to coax two feet of oil, so that the water in the body can be cleaned. Then tighten the screws and add antifreeze. -10 degrees is absolutely fine.

It's time to replace... Adding more or less water is a bit of an impact

Summary. The quality of motor vehicle engine coolant is related to the safe operation of motor vehicles. Recently, the General Administration of Quality Supervision, Inspection and Quarantine has carried out national supervision and random inspection of motor vehicle engine coolant products.

A total of 92 batches of products from 92 enterprises in 16 provinces, autonomous regions and municipalities were randomly inspected. Spot checks found that 8 batches were unqualified, and the main problem was that the freezing point, boiling point, corrosion test and other items did not meet the requirements. The manufacturer of the unqualified product is:

Beijing Zhongkong Aerospace Science and Technology, Shijiazhuang Oukang Chemical Building Materials, Hebei Siruide Lubricating Oil Technical Services, Daqing Silian Chemical Products Processing, Jiangsu Huizhong New Energy, Lanzhou Xinjiali Industry and Trade, Yinchuan Xuetai Antifreeze Factory and Urumqi Midong District Shunfu Daily Chemical Plant. The General Administration of Quality Supervision, Inspection and Quarantine has instructed the relevant quality and technical supervision departments to deal with the above-mentioned enterprises and related products in accordance with the law. According to the industrial and commercial department's commodity quality monitoring of automobile engine coolant in the circulation field of the province, 15 of the 30 batches of products that were sampled were unqualified, accounting for half of the total number of inspections, and the unqualified items mainly include multiple indicators such as boiling point, freezing point and foam tendency.

Hello, dear, the questions you asked, here are the answers to you as follows; Around minus 25.

The quality of motor vehicle engine coolant is related to the safe operation of motor vehicles. Recently, the General Administration of Quality Supervision, Inspection and Quarantine has carried out national supervision and random inspection of motor vehicle engine coolant products. A total of 92 batches of products from 92 enterprises in 16 provinces, autonomous regions and municipalities were randomly inspected.

There are 8 batches of unqualified products, and the main problem is that the freezing point, boiling point, corrosion test and other items do not meet the requirements. The unqualified product manufacturers are: Beijing Zhongzai Aerospace Science and Technology, Shijiazhuang Oukang Chemical Building Materials, Hebei Siruide Lubricating Oil Technical Services, Daqing Silian Chemical Products Processing, Jiangsu Huizhong New Energy, Lanling Tsai Prefecture Singapore Industry and Trade, Yinchuan Xuetai Antifreeze Factory and Urumqi Midong District Shunfu Daily Chemical Plant.

The General Administration of Quality Supervision, Inspection and Quarantine has instructed the relevant quality and technical supervision departments to deal with the above-mentioned enterprises and related products in accordance with the law. According to the industrial and commercial department's commodity quality monitoring of automobile engine coolant in the circulation field of the province, 15 of the 30 batches of products that were sampled were unqualified, accounting for half of the total number of inspections, and the unqualified items mainly include multiple indicators such as boiling point, freezing point and foam tendency.

How much is 10 liters of water added to a 3-axle car?

It's about minus 5.