The color of Samsung TV is not normal,Samsung TV does not support how to adjust the resolution back

Samsung TV image color is not good (e.g.: whitish, color cast, blurred screen, etc.), it is recommended that you:

3.If the color display of the image is normal after the test, please contact the signal department to check the signal; If the problem persists after the test, please log on to Samsung's official website to report for repair, and Samsung maintenance personnel will come to inspect and deal with it.

The color contrast of Samsung TV is not good,It's very bright again in half an hour,And bring the strip back and light up again after half an hour,What is the reason for this?

Hard wounds, can't be solved.

I think Samsung's color is not normal,Just change Sony TV。

The color of Samsung TV is not normal,It is recommended to do the following:

1、You can try to adjust and press the [Project] button of the TV remote control (please press the [More] button for the smart touch remote control, select [Project]), select [Image], select [Brightness] and [Contrast] according to personal needs, and the brightness is recommended to be set between 60-80; The contrast ratio is recommended to be between 80 and 100.

2. If there is no effect after trying the above operation, you can try to contact Samsung after-sales service.

Samsung TV does not support resolution, how to adjust it back, hello! The main reasons and solutions are as follows: 1. The signal source mode of the TV is not switched correctly, resulting in a mismatch between the signal source mode and the input signal source, so the TV will prompt no signal; Workaround:

Press the signal source button of the remote control, pop up the menu of the signal source, select HDMI mode, press the confirm button to switch, and there will be a computer screen after switching. 2、If there is still no picture of the computer after switching,It may be that the resolution of the computer is set too high,Beyond the maximum resolution that the TV can support,So there is no signal。 Workaround:

Set the resolution of your computer to the lowest so that the TV displays the picture, and then slowly increase the resolution to make the picture look the best. 3. If there is still no signal, it may be that the computer has not switched to projection mode, and you can press the fn key and the projection key at the same time (there is a pattern of a square screen on the button) to solve it. 4、In addition,Please check the properties of the second monitor in the advanced,Whether the screen refresh rate is60Hz,No, please adjust it toPlease check whether the TV signal input channel is adjusted to【HDMI input】,In TV、PC、Under the * input channel,It will be displayed like this without signal。

6、Please check the TV description carefully,Whether it supports 1920 1080 resolution,Or,Reduce the resolution first, such as1366 768Try it,Then turn it up。 7. If you are a notebook, there will be a corresponding shortcut style on the notebook. Through the keyboard combination of FN+, the two can turn on and switch the output of the second display.

Therefore, after setting the parameters and wiring correctly, if you are a laptop, you need to turn on the switch in this way, so that there will be a second display signal output to the TV.

The TV is not connected to the network.

Follow the steps below to try setting it up

1.Turn on the power supply, then plug in the network cable, plug in the WAN port (generally the blue port), and then connect with the computer to plug in any LAN port, after doing these jobs, then you will see that there is an address and account password behind the router, after connecting, enter the address you see in the router in the browser, generally of course, if you are using ** online network, then you have to prepare an additional modem, commonly known as "cat").

2.Then enter, enter the corresponding account and password, generally the new ones are admin

3.After entering the operation screen, you will see a setup wizard on the left, Attack on the entry (usually it pops up automatically).

4.Click Next, enter the Internet access method settings, we can see that there are three Internet access options, if your home is dial-up, then use PPPOE. Dynamic IP can be used by the computer directly plugged into the network, and there is a DHCP server on the upper layer.

Target. Static IP

Generally, it is a private line or something, or it may be cell bandwidth, etc., and the upper layer does not have a DHCP server, or wants to fix the IP. I chose PPPoE because I dialed.

5.If you choose PPPOE dial-up Internet access, you need to fill in the Internet account and password, which should be understood by everyone, and there will be an account number to open broadband, and it is OK to fill it in!!

6.Then the next step is to enter the wireless settings, we can see the channel, mode, security options, SSID, etc., generally SSID is a name, you can fill in as you like, and then the mode mostly uses 11BGNFor wireless security options, we need to choose WPA-PSK WPA2-PSK, which is so safe that it will not be hacked and rubbed by the network.

If the above method does not solve the problem, it is most likely due to hardware reasons.

1. The network cable is not plugged in, and the computer cannot detect the network connection.

2. Network cable damage also causes the network to be unable to connect.

3. If the network cable is transferred through the router, then you can check whether the router is running normally.

If you find that the color of your Samsung TV is faulty, here are some possible solutions and suggestions:

1.Adjust image settings: Sometimes, color issues can be caused by incorrect image settings. You can try adjusting settings like brightness, contrast, and saturation to see if that fixes the issue.

2.Do a restart: Sometimes restarting your TV may resolve temporary software issues. You can try turning off the TV, unplugging the TV, waiting a few minutes before plugging it back in, turning on the TV skindresser, and seeing if the colors are displayed correctly.

3.Check the power cord: Faulty colors can also be caused by a damaged or loose power cord. You can check that the power cord is tightly connected and not damaged or cracked. If you find a problem, replace the power cord.

4.Check the HDMI cable: If you have other devices connected to your TV, such as a game console or set-top box, you will also want to check that the HDMI cable is tightly connected and not damaged or cracked. If you find a problem, replace the HDMI cable.

5.Contact Samsung Customer Service: If none of the above methods work, please contact Samsung Customer Service for further help and advice. They may recommend a higher level of repair or have you replace certain parts of your TV.

Overall, before trying the above methods, you need to determine whether the bold color glitch in the report occurs randomly or persistently. If it's just happening, you can try a simple workaround. But if the problem persists, it's best to contact a professional for help.

The color of the Samsung TV is not normal, and my TV will be uncolored and cloudy after an hour of being turned on.

There are actually many reasons for the abnormal color of the TV machine, and the color abnormality of the color TV is usually manifested as colorless, monochrome, color cast, color distortion, color creeping, etc. When the color of the TV is abnormal, if the overall color shift changes when the color of the TV is dry, then it is most likely that there is a problem with the three primary color channels of the TV, and when the color of the TV is abnormal, the local color bias occurs, then the most likely reason is that the TV is demagnetized, no matter what kind of reason causes the color of the TV is not often we need to repair it in time.

If you can't set the color temperature on your Samsung TV, try the following steps:

1.Make sure your TV is using the latest firmware version. Sometimes, updating the firmware can fix the issue.

2.Try changing your TV's "Picture Like Hail Mode" to "Pro Mode" or "Movie Mode". In these modes, you should be able to set the color temperature.

3.Check that your TV has "Auto-Brightness" or "Auto-Adjust Backlight" enabled. If this feature is enabled, it may affect your color temperature settings. Try turning these features off and trying the color temperature setting again.

4.If you still can't set the color temperature, try color calibration using your TV remote's color palette (r, g, b) options. You can use these options to manually adjust the color to achieve your desired effect.

If you've tried the steps above and still can't set the color temperature, it's recommended to contact your Samsung TV's customer service team and have them provide accurate technical support.