What monitor is good for PS3?

Updated on number 2024-03-15
5 answers
  1. Anonymous users2024-02-06

    Within 3000-4000, then you have more choices.

    In this way, within the same price range, the size is small and the performance is good. Large size, relatively low performance.

    Samsung's is OK, but the best within 3000-4000 is Dell, and the corresponding rate is something, for LEDs are floating clouds, your eyes are not good enough to be able to see in frames.

    As for the size,I'm going to ask you about the game distance first.,Mine is50cm-80cm,24 inches,It's enough for me to use.,No matter how big it is, it's going to be farther away.,The distance and size are hooked.,And 3000-4000 must use HDMI.,Needless to say.。 If your distance is farther, it may go to30Or even 32,Then it is better to buy a domestic HisenseLED light source TV。

    A variety of options, depending on how far you play.

    Upstairs is really fierce, others ask below 4000, you take an inch of more than 1000 to hang around, or the tragic ASUS, professional point is not OK.

    Dell has what you need, followed by Samsung, NEC's 4000 or less you can also look at anything, and the rest is floating clouds without looking.

  2. Anonymous users2024-02-05

    There are no requirements, most of them can be used. The difference is in the display and the like. ASUS MS228H-A has good performance and is more recommended. In fact, ASUS's monitors are not bad, mainly ***, worry-free. PS3 is.

  3. Anonymous users2024-02-04

    1. For some reason (cough cough, of course, it's the reason why I don't know about the shirt). The display must support HDCP, if it is not supported, you don't need to look at the following, just change the display wheel cavity handle. Once we have determined that the display supports HDCP, we can move on to the next step.

    Look at how many there are behind the monitor and what kind of sockets they have.

    2. Find the HDMI interface of the TV, and then connect the HDMI cable to PS3 at one end and connect to the TV at the other end. If you don't find the HDMI interface, the chromatic aberration interface of the TV series can also be connected to PS3 and TV.

    3. Confirm the HDMI input port of the TV: Find an input port labeled HDMI behind the TV, and make sure there is an available port. Connect the HDMI cable:

    Plug one end into the HDMI input port of your TV and the other end into the HDMI output port of PS3.

  4. Anonymous users2024-02-03

    Just plug it in. But if your monitor doesn't have speakers, there's no sound, and there's no way to fix it.

  5. Anonymous users2024-02-02

    If there is an HDMI interface, you can directly use it, and connect it with an HDMI cable.

    If you don't have an HDMI to VGA cable, you need to choose which one has audio output.

Related questions
2 answers2024-03-15

Samsung: T220 1800 yuan.

Size (inches): 22 >>>More

4 answers2024-03-15

The motherboard is a little more likely, or it may be a problem with the graphics card, you first unplug the graphics card and clean it up, as well as the memory, and try again.

4 answers2024-03-15

First of all, you have to know that although PS3 is cracked, if you mistakenly upgrade the system, then everything is over again, and judging from the Call of Duty 7 situation (it must be a new system to play), the future games are estimated to have to be new systems to play, even if this is not the case. But PS3 has just been cracked, and the game resources available for ** are not as good as Xbox360. Of course, if you have money, none of that matters. >>>More

6 answers2024-03-15

The main difference between the two is the refresh rate and response speed,This is also the key parameter to judge whether it is an e-sports monitor,Take Ant E-sports's e-sports monitor ANT271QC,The main optimization for the game is the following three aspects: >>>More

2 answers2024-03-15

Subdivided into DVI-D and DVI-i, DVI-D is a pure digital interface, the best choice for large-screen LCD. DVI-I supports digital and backward compatible analog signal output, and our common DVI to D-Sub adapter must be used on DVI-I to achieve conversion. >>>More