REDMI NOTE WHAT S GOING ON WHEN I CAN T CONNECT TO WIFI

Detailed operation: Log in to the Pathfinder settings page, such as entering it in the browser""Login, username.

The default password is admin (the address of different brands of routers is different, and if you don't know, you can check the wireless router.)

surface annotation), go to the wireless router and select it"DHCP server.

of"Static address allocation"That item, MAC address.

d3:ff:21:

DU or 43-9U-D3-FF-21-DU, different formats for different brands), IP address.

Fill in the address you want to assign (e.g., where 199 can be replaced by any number from 1 to 255), the status selection takes effect, the settings are saved, and the phone is ready to access the Internet immediately.

Problem 2: The mobile phone can connect to wifi, but it can't connect to the network and can't open the web page.

Solution: The NDS of the DHCP server is not set in the router settings! Enter the DNS of your region

Again, log in to the router settings screen first, and then go to the DHCP server settings.

Default domain name: Not required.

Primary DNS server.

Alternate DNS server:

1. Check the router settings to see if other devices under the network can access the Internet normally, if not, please continue to look down, if you can, please see "two".

1. Open the browser of the computer connected to the current wireless router, enter part of the router in the address bar, check the bottom label of the router to know), log in to the web configuration interface of the current router, and the default username and password are admin

2. Under the network settings of the router, first find the WAN port setting option of the router. Setting the "type" correctly here is the crux of the matter. Generally, there are two commonly used types:

PPPoE and DHCP. Choose this according to your own situation. If it is a home ADSL dial-up Internet access, choose PPPoE; If there is a direct network interface available, such as cell broadband or hotel, DHCP

3. If it is DHCP, there is no need to make other settings, and the router will automatically obtain the corresponding network settings. If you choose PPPoE, you need to fill in the correct username and password, which are provided by network service providers, such as China Telecom, and if you forget your password, you can call 10000 for manual consultation.

4. Next, check the LAN port settings of the router. The settings of different brands are actually similar, the most important thing is to turn on the DHCP function, so as to ensure that the router can assign an IP address to the device when it is connected to the LAN port or connected to WiFi, and the IP address range assigned by DHCP should be in the same network segment as the IP address of the router, for example.

5. Finally, check the security settings of your router. Check whether you have enabled some security policies that restrict MAC or IP address connections, or the corresponding rate limiting policy, and if so, turn them off, otherwise only devices with specific MAC or IP addresses can connect.

Second, if it is not a problem with the network, try to see if the mobile phone can connect to other wifi to the Internet, if not, please see the "three", if so, then check the settings of the mobile phone.

1. Open your phone's settings and select "Wi-Fi".

2. Then, when you see the wifi signal that you are currently connected to, click on the small blue circle arrow on the far right.

3. Click "Ignore this network". Then, the wifi connection of the mobile phone will be disconnected, so that the mobile phone will not automatically connect when you click to connect to the signal source again, but will re-enter the connected wifi password, that is, the mobile phone will re-identify the network once, so that you can achieve the effect of emptying the original network configuration.

4. Of course, if you want to clear it more thoroughly, you can open Settings --- General --- Restore in turn, and select "Reset Network Settings". In this way, the device will restart, and after the restart, all previously connected networks will not be saved, but will be recognized as a new network, and the wifi password will be entered to connect.

3. If the mobile phone is still unable to access the Internet after reconnecting (and even other wifi cannot be used normally), you can restore the factory settings or contact the seller for repair.

Is it wifi? After deleting the network, re-enter the password and try it.

Hi! You can set up your phone by following the steps below:

1.Click Settings --Wi-lan, select the arrow next to the name of the network you want to connect to, select Don't save the network, and re-enter the password.

2.Restart your phone and router.

3.Still doesn't work, I recommend you try other wifi networks to see if it works.

If it can be used normally in other WiFi router environments, then it may be caused by the current problem of this router itself.

Xiaomi phone flashing tutorial:

There are several reasons why your phone is connected to wifi but you can't access the Internet

1. The wifi itself is a problem, and the wifi may not be connected normally, resulting in the inability to access the Internet.

2. Router problems, the router may be overheated or damaged.

3. Broadband arrears may lead to inability to access the Internet.

4. The wifi name contains Chinese, resulting in some mobile phones unable to connect to the Internet.

5. There may be a problem with the mobile phone system, which may cause the connection to wifi but the Internet cannot be accessed.

Suggested workaround:

1. Use other mobile phones or devices to connect to wifi to try whether you can access the Internet, and rule out the wifi itself.

2. Restart the router to try, or restore the router to factory settings, then dial up the Internet again, and reset the wifi according to the setup wizard, or change to a new router and dial up to connect to the Internet.

3. Contact broadband customer service to confirm whether there is any abnormality in the broadband account, such as arrears, recharge the broadband, and then dial up to connect.

4. If the wifi name contains Chinese, it is recommended to modify it to English or a combination of English and numbers before connecting.

5. If the above reasons are ruled out, it is likely to be a problem with the mobile phone system for a long time, it is recommended to restore the factory settings or flash the phone to see if it can solve the problem.

It depends on the situation.,Sometimes you need to set the address on your phone.。。

1. If the opportunity allows; Restart the wireless router; See if you can solve the problem.

2. In Make sure your phone is within the wireless network coverage range, click "Scan" to refresh the wireless network list.

3. Connect the computer to the router through the network cable and log in to the management interface of the router.

4. In Wireless Settings - Basic Settings, the channel is between 1 and 11, the wireless function is turned on, and the router is restarted.

1. The unsuccessful wireless connection may be caused by incorrect settings of wireless password and other parameters. A new key entry attempt.

2. Please make sure that the wireless router does not have the wireless MAC address filtering function enabled; Wireless Settings - Wireless MAC address filtering, turn off the wireless MAC address filtering function Wireless Settings - Wireless MAC address filtering, turn off the wireless MAC address filtering function.

Three: What should I do if the wireless connection is successful and I can't open the web page?

First of all, check whether the router is connected to the external network, log in to the router management interface, and look at the running status - WAN port status, if it is 0, please follow the router quick setup guide to set it again.

2. If the computer can access the Internet, the mobile phone cannot; Check whether the SSID number of the wireless router is in Chinese; If it is changed to letters and numbers; Mobile phones sometimes can't effectively recognize Chinese:

3. If the above cannot be solved: we set a static IP for the mobile phone

4. The wireless router supports between 15-20 wireless devices; When the maximum number of connected wireless devices is exceeded, even though you are connected to Wi-Fi; But you're wireless; At this time, you can unplug the wireless router; Turn on the wireless router after 10 minutes.