What is the difference between Haier Electric Water Heater ES60H T3 E and ES60H T3 ES

ES60H-T3(E) is the ** model, the machines of these two models are exactly the same, and the suffixes (se) and (je) in the models only represent different sales channels.

Use and maintenance of electric water heater:

1. When putting on the water, the water outlet must be opened, and the air in the inner tank can be checked to see if the water is full;

2. The power supply must be cut off before emptying;

3. When it is installed in a closed manner, the water inlet valve must be open during heating;

4. When you first open the valve, don't put the direction of the water towards the human body.

If the electric water heater is used for a long time, if the user does not clean the inner tank of the water heater in time, it will cause serious scaling of the heating pipe, the heat heating of the electric heating pipe is not sufficient, and the hot water will heat up very slowly, which affects the normal use, and there is an accident of rupture due to uneven local heating from time to time, so the electric water heater should be maintained once a year.

Hello, Haier electric water heater ES60H-T3 (E) is the same as ES60H-T3 (ES), it may be a mistake by the salesperson, there is no (ES) this model.

Hello, thank you for asking the company.

Hello, ES60H-T3 (E) is ** model, ES60H-T3 (ES) may be a mistake by the salesperson.

You are welcome to ask the company questions again.

We wish you a happy work life

Exactly the same, ES Suning exclusively for EG Gome.

How to use Haier electric water heater ES60H.

How to use Haier Electric Water Heater ES60H Hello dear, Haier ES60HQBQE How to use: 1When you buy it back, after the installation is completed, the first step is to connect the water, and after the water is electrified, so as to prevent the new machine from drying up.

2.When you usually use it, you should also pay attention to turn off the power first after using it, turn off the water, and pay attention to cleaning and cleaning the filter screen for water purification inside after a long time. Prevent clogging.

3. Replace the magnesium rod. Most of today's electric water heaters are designed and installed with magnesium rods, which are used as sacrificial anodes in water heaters. Because the metal activity of magnesium is higher than that of iron, when the magnesium rod and the ordinary steel plate are exposed at the same time, the magnesium rod will first be corroded away instead of the steel plate, so as to achieve the purpose of maintaining the inner tank.

4. Clean regularly. After the instantaneous electric water heater is used for a period of time, scale dirt will be generated on the surface of the inner tank and heating pipe, which will affect the effluent quality and greatly reduce the heat exchange efficiency. If it is not removed in time, it will not only waste electric energy, but also shorten the life of the heating tube and liner due to poor heat conduction, and even overheating damage.

Therefore, the electric water heater should be bathed regularly. , I hope I can help you.

Summary. ES60H-C3 is a storage type electric water heater, how to use it can be carried out by referring to the following process. 1. After the installation is completed, you need to fill the water storage tank with water first, by completely opening the hot water side of the water inlet valve and the mixing valve, and after waiting for about 5 minutes, when the mixing valve begins to discharge water, close the mixing valve.

2. At this time, you can turn on the power supply of the water heater and observe whether the power indication is on. 3. Adjust the temperature gear. Adjust the gear or set temperature according to the water temperature and heat, and the general temperature setting range is between 35 and 75 degrees.

4. Check whether the heating indicator is bright when heating, and observe whether the temperature display is rising. 5. When the displayed temperature reaches the set temperature, the water heater will automatically stop heating, and only need to open the mixing valve to adjust the water outlet temperature during bathing. (can be powered off and used) 5. After bathing, you can disconnect the power supply, and then use the air power supply next time.

However, if it is used frequently, there is no need to turn off the power, and the water heater can be automatically kept insulated.

How to use Haier electric water heater ES60H.

Why don't you heat up what's the situation?

Haven't touched the settings.

ES60H-C3 is a storage type electric water heater, how to use it can be carried out by referring to the following process. 1. After the installation is completed, the water storage bucket needs to be filled with water first, the method is to completely open the hot water side of the water inlet valve and the mixing valve, and close the mixing valve when the mixing valve begins to discharge water after about 5 minutes. 2. At this time, you can turn on the power supply of the water heater and observe whether the power indication is on.

3. Adjust the temperature gear. Adjust the gear or set the temperature according to the water temperature and heat, and the general temperature setting range of the rental shed is between 35 and 75 degrees. 4. Check whether the heating indicator is bright when heating, and observe whether the temperature display is rising.

5. When the displayed temperature reaches the set temperature, the water heater will automatically stop heating, and the water outlet temperature will be adjusted as long as the mixed water valve is opened during bathing. (can be powered off and used) 5. After bathing, you can disconnect the power supply, and then use the air power supply next time. However, if it is used frequently, there is no need to turn off the power, and the water heater can be automatically kept insulated.

The indicator light is on.

1.The indicator light of the electric water heater is on, indicating that the normal key is Lingxun electricity, and there is a fault if it is not heated. 2.

Common thermostats are in poor contact, or the thermal fuse is burned, and the electric heating rod is broken. In general, if it is not a big problem, the user can deal with it by himself, and the professional problem needs to be dealt with by professionals.

1. Under the water heater, there are two gates, one is the hot water outlet gate, and the other is the cold water inlet gate.

2. Usually the two gates must be opened, and the power supply can be controlled by the switch on the water heater without unplugging.

3. Adjust the thermostat to make the heating indicator light on, and when the heating temperature is set, the power supply will be disconnected to enter the automatic heat preservation state, and the same amount of cold water will be automatically injected while the hot water is produced.

4. Do not close the cold water inlet sluice at ordinary times, otherwise there will be no hot water, due to the continuous replenishment of cold water, the water in the water heater is always full, and the water heater will automatically stop the water intake; When using hot water, open the mixing sluice gate and put it on the shower to bring out hot and cold water mixed with hot and cold bath water.

5. After use, turn off the power switch on the water heater.

The use of water heaters is as follows:

1. Under the water heater, there are two gates, one is the hot water outlet gate, and the other is the cold water inlet gate.

2. Usually the two gates must be opened, and the power supply can be controlled by the switch on the water heater without unplugging.

3. Adjust the thermostat to make the heating indicator light on, and when the heating temperature is set, the power supply will be disconnected to enter the automatic heat preservation state, and the same amount of cold water will be automatically injected while the hot water is produced.

4. Do not close the cold water inlet sluice at ordinary times, otherwise there will be no hot water, due to the continuous replenishment of cold water, the water in the water heater is always full, and the water heater will automatically stop the water intake; When using hot water, open the mixing sluice gate and put it on the shower to bring out hot and cold water mixed with hot and cold bath water.

5. After use, turn off the power switch on the water heater.

Question: Is this gate valve open or closed? Why can't I hear the sound of water entering the water?

I'll send you a picture to ask a question.

Is a question asked without a marker?

After the Haier electric water heater is installed, due to the lack of water in the inner tank for the first time, the tap water inlet valve and mixing valve must be opened first, and the Hu Fa must be beaten to the larger hot water outlet gear, and the water outlet valve must be closed after the water outlet hole is continuously discharged (the water heater container is full).

Power on: Plug in the power, the display will be fully displayed for 1 second, the water heater will enter the standby state, and only the temperature value will be on at this time. Press the on/off button to enter the working state before the last power failure.

2. Function introduction.

Split person washing mode: In the boot state, press the "split person wash" button, and the machine will circulate in 1 person washing, 2 people washing, and 3 people washing. The water heater will automatically complete the heating according to the number of bathers you set, so as to meet your convenience and comfort when using it.

Time setting: In the boot state, press the "hour" or "minute" button, the clock flashes, each time you press the "hour" button, the hour number changes between "00-23" in the unit of "1", and the system will automatically confirm or not operate after about six seconds.

When flashing, press the "minute" button once each time, and the molecular number is in units of "1", cycling between "00-59", the same setting.

Extended Materials. 1) Set the thermostat to about 65 degrees Celsius, when the electricity consumption is the most economical.

2) For households that do not use hot water frequently, it is recommended to start the electric heating 1 hour before bathing and turn it off after bathing. This minimizes energy consumption and maximizes savings on electricity bills.

3) For families who use the water heater every day and only use it for bathing, and the amount of hot water used is not large, it is recommended to turn on the water heater about 1 hour before bathing. If you want to take a bath at a relatively fixed time every day, you can buy a computer-controlled water heater product and use its timed heating function to complete it. Turn off the water heater after bathing.

ME is a household appliance to the countryside, QE is a non-household appliance to the countryside, it is the same machine, QE is slightly more expensive than ME.

Haier water heater ES60H-Z3 (ME) and ES60H-Z3 (QE) have no difference in appearance or other product parameters, the only difference is: ME is the previous home appliance to the countryside series, XE is the home appliance to the countryside series, QE is not to the countryside series, so there is no difference between the appearance of the same model and the material of the machine, but there is a slight difference between the top and bottom, but not a lot! Because household appliances can be subsidized by 13% in the countryside.

The basic parameters of ES60H-Z3 are attached below:

Main parameters: 1. Series name: TT Premium 2. Product type: rapid heating 3. Installation: horizontal.

4. Control mode: wireless remote control, mechanical control 5. Heating mode: 3D dynamic heating.

6. Product capacity: 60L7, rated pressure: 9, water temperature adjustment: 75

10. Energy efficiency level: level 1 11, rated voltage: 220V 50Hz 12, rated power: 2000W

13. Rated current: 16A

Other parameters. 14. Waterproof grade: PX4 (splash-proof type) 15. Liner material: King Kong three-layer inner tank.

16. Product color: white 17. Product size: 825*530*444mm 18: Product weight: 25kg

Other features. 19. Load-bearing wall: wire requirements, electricity meter requirements 5 (20) A, air switch 16A

Other features: 20. Wire requirements: Meter requirements: 5(20)A22, air switch: 16A

Other features, product accessories, packing list, electric water heater x1, remote control x1, battery x1,

Expansion bolt x2, expansion hook x2, instruction manual x1

There is no difference, the only difference is: ME is the previous home appliance to the countryside series, XE is the last home appliance to go to the countryside series, QE is not to the countryside series, so there is no difference in the appearance of the same model and the material of the machine, but there is a slight difference between the top and bottom, but not a lot! Because household appliances can be subsidized by 13% in the countryside.

Hello, thank you for asking the company.

ES60H-Z3(ME): It is a model for home appliances to go to the countryside.

ES60H-Z3(QE): Normal model.

There isn't much difference between the two.

You are welcome to ask the company questions again.

We wish you a happy work life

The volume is the same, the functions are almost the same, they are all remote controlled, and the insulation is also very good, it is estimated that it is two models in a series, you can go to the official website to see the specific parameters.

ES60H-Z3 (ME) is a market product, ES60H-Z3 (QE), is a home appliance to the countryside machine with the same function.

I don't know, you can tell me.

Hello, thank you for asking the company.

ES is an offline product, which is sold in a physical store, and EC is an online product that is sold online, and you are welcome to ask the company questions again.

We wish you a happy work life

ES is an offline product that is sold in a physical store, while EC is an online product that is sold online.

One. Basic concepts.

Haier Water Heater in Qingdao Economic and Technological Development Zone is one of the fastest-growing large-scale backbone enterprises of Haier Group specializing in the production of water heaters. The company has production bases in Haier Industrial Park in Qingdao Economic and Technological Development Zone, Haier Industrial Park in Wuhan and Haier Industrial Park in Chongqing, with an annual production capacity of 5 million units, making it the largest water heater production base in Asia. Its key equipment has been imported from Germany, Italy and other countries.

Among them, the important equipment has the characteristics of networking, which can realize remote control by computer.

Two. Basic introduction.

"Safety-oriented" is the basic concept of Haier water heaters. Over the years, the company has adhered to the corporate tenet of high-tech, high-grade and high-differentiation, guided the industry trend with international leading safety technology, and met consumer needs with innovative products. The company has built a number of international advanced level laboratories such as safety laboratory, water spraying laboratory, user simulation laboratory, etc., and its product safety technology, energy-saving technology, liner technology and intelligent control technology have also reached the international advanced level.

As of April 2008, according to Sino Market Research, Haier electric water heaters have become the leading market leader with a market share of more than 40%.

Three. Technological advantages.

d. Heating is energy-saving.

The 3D heating technology can be washed immediately in summer, and only need to be preheated for about 20 minutes in winter, so as to avoid heat loss caused by preheating, and heat as much water as you want, reducing waste.

2. The world's top 500 enterprises supply materials to achieve the quality of life.

Liquid Expansion Thermostat: The liquid expansion thermostat measures the temperature in the middle of the inner tank, which is more sensitive and more accurate than the button thermostat attached to the wall of the inner tank.

3. Ultra-long cored magnesium rod, effectively prolonging the service life.

Haier uses a specially formulated magnesium rod to minimize consumption and protect the inner liner; The stainless steel inner core ensures that the magnesium rod does not break. According to the different sizes of the inner tank, it is equipped with personalized high-quality magnesium rods, which can weigh up to 312g, which is more reasonable and effective to use and prolong the service life of the inner tank.

4. Imported stainless steel heating pipe from England, anti-corrosion and anti-scale.

A good heating pipe must first have high thermal efficiency, and secondly, it must be anti-corrosion and anti-scale. Although non-ferrous metals have strong thermal conductivity, it is difficult to avoid the formation of scale. Due to the high chromium content, the English stainless steel heating pipe used by Haier forms a thin chromium film on the surface, which separates the steel from the intrusive oxygen and plays a role in corrosion resistance.

5. Smart OK key, complex settings can be done with one click.

Create an unprecedented OK key, all complex operations, calculations in one, just choose one person to wash, two people to wash, multiple people to wash, the powerful intelligent system will automatically calculate the heating time according to the needs and room temperature, water temperature, save yourself the trouble of complex or inaccurate calculations, one key to easily get it.