What are the blind spots in the process of driving? What to do?

What are the blind spots in the process of driving? What to do?

Column dead zone. The A-pillar refers to the front windshield and the oblique pillars on both sides of the car are called A-pillars. Whether in a turn or in a straight line, part of the driver's view is blocked by the A-pillar. Creates a blind spot.

2.Blind spot in the rearview mirror.

When the vehicle overtakes the car in front, the car in front will have a small blind spot for overtaking, and the driver of the front car will not be able to see the car behind for a period of time, especially for buses or large trucks, this blind spot is larger. Therefore, you need to be careful when overtaking.

3.Blind spots.

When a person is driving in a tunnel, the pupils are dilated due to the weak light in the tunnel, but when leaving the tunnel, the eyes will suddenly not adapt to the light and suddenly become stronger, and there will be a situation where the road ahead cannot be seen clearly, 4Blind spots on mountain roads.

When the vehicle passes through the bend of the mountain road, the view will be blocked on the inner side of the mountain, so it will cause a blind spot for the vehicle. Therefore, drivers need to pay special attention when driving around corners on mountain roads. Or look through a convex mirror.

5.Blind spots on both uphill and downhill slopes.

Because the driver's field of vision and the slope form an angle when going uphill, it is difficult to see the road ahead. A similar blind spot can be formed on the downhill slope.

6.Inner wheel difference blind zone.

When the vehicle turns, the difference between the turning radius of the front inner wheel and the turning radius of the rear inner wheel will form a blind spot of the driver's line of sight, generally speaking, the blind spot of the train and the bus will be relatively large, many times we see the train crushing the pedestrian ** because the pedestrian has walked into this blind spot.

Blind spot at the front of the car

Whether it is a sedan or an SUV, the upper and lower positions of the front bumper are a blind spot in the field of vision, and the potential safety hazards here mainly exist in the situation of the vehicle starting, moving the parking space, etc., such as parking, always feel that there is no distance in the front of the car, but there is still room to see when you get out of the car. However, the blind spot here will not cause much trouble to the driver, and the way to avoid it is to go around the car to see if there are any obstacles before getting into the car, and pay special attention to whether there are children or animals.

Rear blind spots

The range of the rear blind spot will be larger than the front of the car, generally lower than the trunk part is the blind spot, the way to avoid risks: roll down the window to observe the situation behind the car, or install reversing image, radar, etc., while reversing the right foot does not leave the brake pedal, brake at any time. Of course, when it comes to complex road sections such as residential areas, if conditions permit, you can let your companions command in the back, just in case.

There are the following points to summarize: 1: A-pillar blind spot, part of the driver's vision will be blocked by the A-pillar during driving or turning, and you must pay attention to this point and observe more when driving. 2：

Blind spot in the rearview mirror, you need to pay more attention when overtaking. 3: Blind spot uphill turn, honk in advance to remind the driver of the direction of the vehicle.

The blind spots in the process of driving are: forward blind spots, left and right blind spots, A-pillar blind spots, and rear blind spots.

There are two ways to deal with blind spots: first, drive cautiously, and try to be as slow as possible on crowded roads and complex roads; The second, with the help of on-board electronics,

Blind spotsIt can be roughly divided into fixed blind spots inside the car and mobile blind spots outside the car.

Generally speaking, the blind area under static mainly includes the front blind area, the rear blind area, and the blind area formed by the ABC pillar occlusion.

In the process of driving, overtaking, waiting, turning have corresponding blind spots, the so-called car blind spots, refers to the driver in the normal driving position, the line of sight is blocked by the body, can not be directly observed that part of the area, in short, when the driver is driving in the driver's seat, he can not observe the place is called the car blind spot, the blind spot in the car is caused by the vehicle structure, and some are artificially caused. Blind spots outside the vehicle are caused by fixed or moving objects and lighting problems, and the size of the blind spots encountered varies by different models. There are four blind spots in the car and some artificial blind spots.

The front blind spot, the invisible place in front of the hood, is commonly known as the front blind spot. There are several factors that cause blind spots in front of the car, which are related to the height of the vehicle, the seat, the length of the front of the car, the driver's stature, etc. If the distance between the front blind spots is not well controlled, it is easy to rear-end collisions.

The rear blind zone, the rear blind area of the vehicle, commonly known as the rear blind zone, refers to the area about 30 degrees outward from the rear door, outside the field of view of the rearview mirror. It means that when the front part of the rear car is close to the rear door of the front car, the rear car cannot be observed in the rearview mirror of the front car, and it is very easy to scratch and rear-end collision. Blind spot in the rearview mirror, blind spot in the rearview mirror.

The mirrors on both sides of the car can only see the sides of the body, and it is not possible to fully collect all the information around the body, especially from the service road to the main road, and the vehicle cannot be seen from the left side mirror. If you cut into the innermost lane with a large acceleration angle, it is easy to collide with a vehicle driving at high speed on the innermost lane. The blind area of the AB pillar is the A pillar and B pillar on both sides of the windshield.

When turning, if the A-pillars on both sides are wider, the wider distance will block the line of sight, making the blind area larger, and if the column is narrower, the blind area will be smaller. The B-pillar blind spot is mainly on the right side of the vehicle. When the vehicle needs to be turned outside at a large angle while driving, the B-pillar will block the view and may collide with the vehicle on the right.

Summary. Dear, I am happy to answer for you what kind of blind spot exists in the process of driving, the first blind spot, that is, the blind spot of the A-pillar. We all know that the vehicle is divided into A-pillars, B-pillars and C-pillars from front to rear, with the A-pillars located right on the front windshield.

When we drive the vehicle to turn left and right, the A-pillar will block part of the driver's vision, which may make the driver unable to spot obstacles or pedestrians on the road in time, resulting in traffic accidents.

Dear, I am happy to answer for you what kind of blind and divination area exists in the process of driving, calling Jiansui the first blind spot, that is, the blind spot of the A-pillar. As we all know, the vehicle is divided into A-pillar, B-pillar and C-pillar from front to rear, and the A-pillar is in place at the front windshield. When we drive the vehicle to turn left and right, the A-pillar will block part of the driver's vision, which may make the driver unable to spot obstacles or pedestrians on the road in time, resulting in traffic accidents.

The second blind spot is the blind spot of the rearview mirror. The rearview mirror can help us clearly observe the dynamics of the vehicle behind the side, so that we can predict the trajectory of the vehicle behind the side when changing lanes. However, if we change two lanes in a row, then at this time, due to the large turning angle, we cannot see the side and rear of the car, which can easily lead to traffic accidents.

Therefore, before changing lanes, we must make sure to put on our turn signals in advance to warn the oncoming cars from behind. The third blind repentance area is the blind spot of the mountain road. There are some rugged mountain town roads, and the slope of the head up slope is steep, so the road ahead is a relatively large blind spot.

Therefore, when driving on mountain roads, you must pay attention to the roadside traffic signs and adjust your driving status in time.

The fourth blind spot is the blind spot of the inner wheel difference. When the vehicle is turning, the front and rear turning tracks do not coincide, so it also causes the inner wheel difference when turning. For large trucks, the blind spot of the inner wheel difference is a big blind spot, which can be said to be a "death zone".

The fifth blind spot is the blind spot for overtaking. When we overtake, we will find that it is difficult to notice the road conditions in front of the overtaken vehicle, in case there is a sudden Zhengsui person or obstacle in front of the overtaken vehicle, it is very possible to dodge. The sixth blind spot, the light blind spot, is more common in the tunnel.

Hello friends. In the process of car driving, the driver's blind spot includes the front blind spot, the rear blind spot, the A-pillar blind spot, the B-pillar blind spot, the exterior mirror blind spot and the bottom blind spot. When driving, pay attention to blind spots to avoid accidents.

If the car is going to overtake, it will increase the safety hazard of scraping. Before overtaking, it is necessary to judge the distance between the left and right vehicles, and leave a gap for other vehicles to prevent the drivers of other vehicles from scratching because of blind spots. When driving on the road, if there is no road with a specified speed, it is necessary to control the speed according to the driving conditions of the road vehicles, carefully observe the distance between the left and right vehicles, and avoid scratches between the cars.

In the process of driving, it is necessary to keep a certain distance from the surrounding vehicles. When there is a blind spot, you need to pay attention to slowing down the speed of the vehicle to avoid serious safety hazards.