Citizen E820 Operating Instructions

Citizen. <>

Citizen is a world-renowned watch brand with a mission to provide high-end products and high-level services to all citizens around the world, and hopes to provide a better life for all mankind through products that are "loved by the public and close to the citizens".

Make a contribution. As a large multinational corporation, the Citizen Group has 46 companies in Japan, Sea of Japan.

There are 64 branches and a total of 110 branches around the world. Adhering to the brand philosophy of never stopping innovation and constantly challenging the future, Citizen has always been a leader in the international watch industry.

day, month, leap year; Alarm clocks, chronographs, remote time, watch operation will be a little complicated, it is recommended that you go to the official website of Citizen to see the animation operation method together, the upper left can put the operation animation ** to your computer, or provide an email to send you the manual!

Hello, the E820 calibre watch is a Eco-Drive perpetual calendar watch, and for its operation guide, please refer to this link.

Yes, I have a Citizen E820 watch, I can't tune it, can you help me?

How to adjust the time and date of the Citizen E820-S097622 table.

How to adjust the time of Citizen E820-S096081

Step 1 (Adjust the Date): Pull out the handle of the Citizen watch, the handle has two levels, the first gear is to transfer the date calendar, the upper transfer is to change the day, and the lower is the calendar. Step 2 (Adjust Time):

It should be noted that because the Citizen watch uses a 24-hour system, it is necessary to adjust the date one grid when adjusting the calendar, for example, today is the 20th, then the date should be adjusted to the 19th, and then start to adjust the time. Distinguish between two 12 o'clock, one is 24 o'clock in the morning, and the other is 12 o'clock at noon, if you make a mistake and adjust it for 12 hours, it will lead to a calendar jump at noon. Step 3:

After proofreading the date and calendar, you can push the watch back. Citizen is a well-known watch brand in Japan, and Eco-Drive is the core technology of Citizen. Since the launch of the first Eco-Drive watch in 1995, Citizen has continued to improve the design and technology of Eco-Drive watches, overcoming various technical problems such as dial light absorption, energy storage, and power saving, and finally achieving the perfect integration of cutting-edge watchmaking technology and exquisite and fashionable design with Eco-Drive movements.

There are two types of photo-drive radio-controlled radio-controlled meters: single-office time zone reception and multi-local time zone reception.

Summary. 1. Confirm the reference position: press the B button for more than 5 seconds, and let go when the second hand runs quickly.

The hour, minute and second hands stop at 12 o'clock, and the date is at number 1. (To go back to the current time, press the b button at segment 0 or wait 10 seconds.) Second, the adjustment of the reference position:

1.0 section of the shank, tie the b button for more than 5 seconds, let go after the second hand rotates, and stop. 2.

The second section of the shank, press the A button, the hour hand, the second hand, and the date back and forth, and turn the hour hand to 12 (24) o'clock. Press the A button, and the handle head adjusts the minute hand and second hand to 12 o'clock. Press the A button again and adjust the date to the 1st.

If the pointer returns to the present time, do not need to do this step) 2 sections of the shank, press the A button, the hour hand moves, and turn the shank to adjust the hour hand to the current time (distinguish the morning and afternoon). Press the A button again, and the minute and second hands swing the handle head to adjust the minute hand time, and the handle head is pushed back to 0 segment. 4. Calendar, year, month:

1 section of the shank, turn the shank to adjust the current date. Press the A button again to adjust the current year and month. The shank is pushed back to 0 segments.

5. Adjust the time difference: 1. 0 section of the shank, press the B button to stop the second hand at 12 o'clock, reverse the handle and twist the second hand to the position of 59 seconds, and the time will be slowed down by 1 hour. Press the B button or wait 10 seconds after adjusting to return to the current time.

How to adjust the time and date of Citizen E820.

1. Confirm the reference position: press the B button for more than 5 seconds, and let go when the second hand runs quickly. The hour, minute and second hands stop at 12 o'clock, and the date is at number 1.

I'm sorry I don't understand, but can you elaborate on that?

1. Confirm the reference position: press the B button for more than 5 seconds, and let go when the second hand runs quickly. The hour, minute and second hands stop at 12 o'clock, and the date is at number 1.

(To go back to the current time, press the b button at segment 0 or wait 10 seconds.) Second, the adjustment of the reference position: 1

0 section of the shank, tie the b button for more than 5 seconds, let go after the second hand rotates, and stop. 2.The second section of the shank, press the A button, the hour hand, the second hand, and the date back and forth, and turn the hour hand to 12 (24) o'clock.

Press the A button, and the handle head adjusts the minute hand and second hand to 12 o'clock. Press the A button again and adjust the date to the 1st. 3.

0 segments of the shank, press the b button. 3. For the time: (if the pointer returns to the present time, do not need to do this step) the handle 2 sections, press the A button, the hour hand moves, and the handle is rotated to adjust the hour hand to the current time (distinguish the morning and afternoon).

Press the A button again, and the minute and second hands swing the handle head to adjust the minute hand time, and the handle head is pushed back to 0 segment. 4. Calendar, year, month: 1 section of the shank, turn the shank to adjust the current date.

Press the A button again to adjust the current year and month. The shank is pushed back to 0 segments. 5. Adjust the time difference:

1. 0 section of the shank, press the B button to stop the second hand at 12 o'clock, reverse the handle to twist the second hand to the position of 59 seconds, and the time will be slowed down by 1 hour. Press the B button or wait 10 seconds after adjusting to return to the current time.

The easiest way to do this is to pull out the crown now, adjust the time, turn it around, and adjust it to the current Li Zhao time, and it will jump in the calendar tonight.

Detailed adjustment method:

First, pull out the crown so that all the hands of the watch stop and enter the "adjust time" state. At this point, adjust the time to 6 o'clock. This is done to avoid damaging the date module when adjusting the date of the week for a while.

Second, push the crown back to the position of "Adjust Date and Day". At this point, the hands of the watch begin to rotate normally, and you don't pay attention to them.

Third, adjust the date and the day before the day before the date you adjust the schedule. For example, today, Friday, the 29th, and you change the watch now, then move the week to Thursday and the date to the 28th.

Fourth, pull out the crown again to the "adjust time" state when the hands stop, start to adjust the time, let the hands turn clockwise, then the action needs to be gentle, adjust the time until the hands indicate close to about 12 o'clock, and find that the date and day of the week jump to the next day (that is, the day of the watch adjustment), this jump may not happen until the hour hand passes 12 o'clock for the second time, it doesn't matter.

The hands of the date jump indicator now start to indicate the time of day in the morning, if you happen to be adjusting the watch in the morning, then adjust the watch to the current exact time, then push the crown back completely, and the watch hand turns normally and quietly, and the watch is finished.

If you are adjusting the watch in the afternoon, then continue to adjust the time so that the hour hand passes through 12 o'clock again, (the date and day of the week will not be jumped, and the day of the adjustment will still be displayed) at this time the watch will indicate the afternoon time of the day you adjust the watch, then you continue to adjust the watch time to the current exact time, push the crown back completely, the watch hand rotates normally, and the watch is adjusted.

1. Pull out the crown and stop all the hands of the watch to enter the "adjust time" state. At this point, adjust the time to 6 o'clock. This is done to avoid damaging the date mold when adjusting the date of the week for a while.

The watch handle pulls out the first gear to adjust the day and date, and pulls out the second gear to adjust the time. First of all, at 24 o'clock, the watch hand is in the second half of the circle, and the time is between 10 and 2 o'clock in the evening, do not adjust the date directly, which may damage the date transmission gear. Set the time to 10-2 p.m. first.

2. For a watch without a date, when the seconds run to the 12 o'clock position, pull out the shank and rotate clockwise to adjust the time. If there are no seconds, you can adjust the minute hand to the first two minutes of the time you want to adjust the time, and then push it back to the shank after adjusting the time.

3. For watches with calendars, pull out the handle a little bit, you can adjust the day clockwise, adjust the date counterclockwise, pull the handle to the outermost, you can adjust the time, and the specific operation is the same as that of a watch without a calendar. Press the lower left button to switch one function at a time until the time and year, month and day are correct, if there is an incorrect one, press the right 2 keys to add or subtract. (The upper right is minus, the lower right is plus) Adjust it and press the upper left button to exit.