The Mi Security Center often fails to correct traffic, and only once has it succeeded, what s going

The mobile phone uses the network assistant to calibrate the traffic at the end of the month and the beginning of each natural month, which is the reconciliation date of the operator, and it will also have an impact on the traffic calibration during this period

1.Manually enter the used traffic, and after querying the used traffic with the operator, manually enter it into the network assistant, and the setting method is as follows: Mobile Manager --- network assistant --- correct the traffic data--- correct the daily traffic--- enter the used traffic;

2.Manually set the operator and query instructions, update the SMS query template, set the following methods: Mobile Manager --- Network Assistant--- correct the traffic data--- automatically correct the settings--- SMS template--- manually set the query command, enter the traffic query sending number and SMS content, and click Save.

This situation occurs because of an error in the information of the carrier, and the solution is (Demo using a Xiaomi Mi 9 phone.

1. First find the "Settings" icon on Xiaomi's desktop, and click to enter the Xiaomi Settings page.

2. After entering the mobile phone settings page, click on the settings page to select "Dual SIM and Mobile Network."

This setting.

3. In the mobile network settings page, click the setting item "Traffic ** Settings" to enter the detailed settings page.

4. After entering the traffic ** setting page, first turn on the "automatic correction" function switch of the traffic, and then click "Operator Settings" to fill in the operator information again.

5. Fill in the relevant information correctly on the operator information filling page, and click the "Save" button in the upper right corner to successfully modify the operator information after filling in, so that the calibration of the mobile phone can be carried out normally.

6. After filling in the correct carrier information, Xiaomi mobile phone.

Traffic correction is performed automatically on a daily basis.

Hello, glad to answer for you!

According to your description: depending on what software you use, some traffic correction requires the mobile phone to send SMS to the business hall, and some are network acquisition, please check whether the software you use allows text messaging, read the status of the mobile phone, and use data traffic! If it is not this kind of problem, it may be a system bug, and it is recommended that the third-party software of Mobile Manager monitor the mobile phone traffic!

Mi Security Center often fails to correct traffic:1. According to your description, depending on what software you use, some traffic correction requires the mobile phone to send a text message to the business hall.

2. Some are network acquisition, please check whether you use the software to allow text messaging, read the status of the mobile phone, and use data traffic.

Why did the 10086 SMS messages come in and fail when the Mi Security Center corrects the traffic?

1. You can uninstall some of the software in your phone except for the running memory.

2. There is too much software, uninstall it a little card, and restart it.

Xiaomi phones. The failure to always correct the flow rate is caused by a correction error, and the workaround is:

1. Find the MIUI system on the Xiaomi desktop.

The built-in settings icon, then click to open, find [Other App Management], and click to enter.

2. After entering [Other Application Management], find [Network Assistant] (English: Data Usage), and click on it.

3. On the page, click Clear Data.

4. After the Qingjing Bureau removes the data, the notification bar will immediately receive a message from the network assistant (SIM card.

The traffic rate is not set**, do you want to set it? ), click in or go to [Security Center] to reset the traffic settings. Accompany the manuscript.

5. After the setting is completed, you will go to a page that shows how much traffic is left and how much traffic has been used, and then you can see that the traffic has been automatically corrected, and the system will prompt you to correct successfully or failed after the correction is completed. At this point, the flow correction is back to normal.

There may be a variety of reasons for the traffic correction failure of the Mi Security Center. Here are some possible workarounds:

Network connection issues: Make sure your device is connected to a reliable network. Try connecting to a different network or restarting your network device, then try to correct the traffic again.

App issues: Update your Mi Security Center app to the latest version to make sure you're using the latest features and fixes. If the problem persists, try uninstalling and reinstalling the app.

System Roll Setup Issues: Check your device settings to make sure the data and time settings are correct. Sometimes, incorrect settings can cause traffic correction to fail.

Carrier throttling: Some carriers may have restrictions on traffic correction. If you suspect that the issue is with your carrier, it is recommended to contact your carrier's customer support to find out if they are restricting the traffic correction feature.

Restart your device: Sometimes, simply restarting your device may resolve a temporary issue. Try restarting the device and try to correct the traffic again.

If you've tried the above methods and still can't fix the problem, it's recommended that you contact the Xiaomi customer support team, who will be able to provide more specific help and guidance to resolve your traffic correction issues.

The reasons for the failure of the traffic correction of Xiaomi phones may be:

1.The phone's memory is noisy and hidden.

2.Too much software causes.

Here's how to fix the problem:

1.Open the settings of your phone and click "Other App Management".

2.Click on "Network Assistant" to enter.

3.Click on "Clear Data".

4.Once the data is clear, the notification bar receives a message from the web assistant.

5.Re-enter the "Network Assistant" and fill in the correct parameters to complete the correction.

Hopefully, the above information will be helpful to you.