Small Suggestions for Science and Technology Gizmos Essay Hurry Good Reward Hurry Hurry

Updated on amusement 2024-03-15
3 answers
  1. Anonymous users2024-02-06

    Students often buy some biscuits to put at home and eat them as snacks, but the general box lid is not good, and when you touch it lightly and fall to the ground, the lid will immediately break, and all the biscuits inside will leak out, which is very difficult to clean up. Also, if the biscuits are left for a long time, the biscuits will be easy to spoil, and I can't eat them, so I have to throw them away, so I hurt my brain, and finally thought of a perfect solution.

    I don't know anything about cookies, but I still know a thing or two about boxes. The lid of the biscuit box is not tight because there is air in it, and the biscuit is easy to spoil, also because it comes into contact with air, as long as there is no air in the biscuit box. But how can I empty the air, when I opened the drawer to look for information, I opened the drawer and suddenly there was a gust of wind, by the way, make a small hole under the lid, and make a drawer-like thing on the side, as long as you keep pulling the drawer, the air will be pumped out along the small space, and the air in the box will be emptied, so that the lid will not fall off so easily, no matter how many cookies you buy are only put in such a box, you are not afraid of breaking.

    And you don't have to remember how many times you have to use it to evacuate the air, you just have to keep pulling and pulling, and when you can't pull it, the air in it will be gone, and you don't have to worry about not being able to pull it out, just pull it gently.

    How's it like, my tech everyday life gadgets are both practical and simple!

  2. Anonymous users2024-02-05

    In 2030, I found that the oil was gone, so I went to refill it.

    On the way, I noticed that the noise from the car was harsh and distracting, and the exhaust fumes polluted the environment. When I went to work, I found that the paper I used to write on was very soft, and it was easy to scratch when I wrote.

    When I got home, I started working on three things: a solar-powered silencer, a solar-powered refueling meter, and a solar-powered hard and soft meter. They are the size of a watch, with three functions linked together and seven keys on them; The top two are refueling type and refueling, anything can be refueled, the car can add oil, the watch can add electronics, and people can add strength; The middle two holes are silencing type and silencing, plus one hole, you just need to press the silencing button, a water injection will be sprayed out of the hole, after being sprayed by this water, there will be no sound, there is no noise in the car, no sound in the person, no noise in the camera; The following three are soft and hard, soft and hard selection, and light emission, whatever is exposed to this light will become soft or hard, the stone will become soft like bread, the paper will become hard, and you can't cut it with a knife, but you can still write and be very light.

    These three things are convenient and affordable.

    If the electricity is gone, it will remind you: "The electricity is gone, the electricity is gone." Until you hear it. At this time, you only need to put this watch into the matching solar safety electric baton, and after half a minute, there will be electricity.

    At the same time, this watch also has the function of an ordinary watch, and it can watch TV.

    The matching safety electric baton can be made bigger and smaller like a golden hoop bar. Press the button on the electric baton, and you can also use it as a police electric baton to catch thieves.

    It's all just a fantasy, but in order to make it happen, I have to study hard.

  3. Anonymous users2024-02-04

    When I'm at home, I always take the initiative to do whatever I can, such as washing dishes, mopping the floor, and wiping the table. What I am most afraid of doing is mopping the floor, a few houses are dragged down and my hands grind out blood blisters, cabinets, tables and other narrow places are not easy to mop, and they are not clean. Once, while mopping, I thought how nice it would be if I had a pair of mop shoes to wear on my feet and mop the floor!

    So, I designed a mopping tool that was both lightweight and didn't bend over – the shoe flip-flops.

    Production method: 1. The slippers should be larger than the shoes you usually wear, so that they can be easily worn on the shoes.

    2. Use rag strips as mop strips on the soles of shoes, and nail a thick layer of plastic bottom on the mop strips, which is both waterproof and durable.

    3. Use a cloth shell and a tarp to make an upper, and install a zipper on the back root of the upper, which is easy to put on and take off. Connect the upper to the sole and the slip-flop is ready.

Related questions
4 answers2024-03-15

My little inventionClass 4 (1) Lai Yun Instructor: Lu Lihua. >>>More

13 answers2024-03-15

Summary. Gizmo: a steam-propelled ship. Use two cans, a large piece of plastic foam, 30 cm of thick iron wire, pliers, syringe, 100 ml of alcohol. >>>More

2 answers2024-03-15

4. Homemade flashlight.

The specific method of making it is to remove one end of the lid of a waste can (such as a Lulu beverage can) and knock the other end with a round hammer. Roll up two No. 1 batteries with thick corrugated cardboard and put them into the tank with the positive electrode facing up and the negative electrode facing down. >>>More

4 answers2024-03-15

Summary. Hello <>

There are a lot of ideas and possibilities when it comes to tech gadgets for grades 3 to 6. Some of these can be simple mechanisms, such as mechanical pencil sharpeners or automatic page turners; Others may be electronics, such as homemade video games or smart home control systems. These inventions not only help students improve their creativity and problem-solving skills, but also help them better understand the principles of science and mathematics and apply them in real-life situations. >>>More

2 answers2024-03-15

See below for the production method:

The first tools we need to prepare are batteries, magnets, and copper coils. Attach a small magnet (both n or s) at the same pole to the positive and negative poles of the battery. Then put this made battery into the copper coil. >>>More