I bought the AKG K701, how to match the headphone amp, and what is the right sound to listen to?

701 headphone amp requirements are still relatively high, and**not cheap,Since LZ ignores**, I still recommend Rudistor RP010B MKII good licensed 3W5K yuan。

If it's cheaper, use the rudistor rp7c, 1w5k, these things are still very important, the warranty is still more recommended, and the licensed goods are sold in China.

Otherwise, the SAC KH1000 is OK, it is a headphone amplifier created by SAC company for AKG headphones, but it seems to have been discontinued, and let's see if there are any second-hand ones.

Lyman、Solo push 701 will also be it.,But if you're using a notebook, it's almost the same with this.。

It's better to use regular headphones for your Walkman or something, unless you buy a better portable headphone amp.

The headphones should be boiled slowly, at first use a softer **, let the headphones soothe for 10-30 hours at a lower volume, and then use the ordinary** (except rock and dance music) to boil for 100-200 hours at a medium volume; If at this time you listen to the treble is no longer harsh, it becomes mellow and natural, the midrange is warm and friendly, and the low frequency is no longer a mixed rumble, but full of details, then congratulations, OK, you must not rush to quick success.

There are two points to pay attention to in the process of boiling: one is not to work continuously for too long! Because there is resistance in the voice coil, it will heat up after working for a long time, and it will burn the voice coil if you don't do it!

It's best to stop for a few minutes every two hours and then continue. Second, the volume must not be too large, the earbud diaphragm is a very fragile material, if the volume is large, the stroke of the voice coil movement will be large, so as to pull the diaphragm violently, which will cause the voice coil to loosen, the diaphragm to deform or even tear and so on.

At present, the thickness of the diaphragm of electrostatic headphones has been as thin as 135 microns, and the diaphragm of dynamic headphones is only a few microns to a dozen microns (the diameter of our hair is about 60 to 90 microns). The diaphragm itself has internal stresses in the manufacturing process, and assembly stresses are generated when the voice coil is bonded and fixed to the skeleton.

The pure copy of the headphones is almost the same.

It is better to refer to the encyclopedia for details.

Push with ALO Continental V2.

Direct push can produce a good sound, the sound field width analysis is in place, the sound is pure, but the low frequency is a little lacking, and the high frequency is slightly whirring in the large orchestration**, but the overall is still very good. Of course, it is better to have a budget to put up, but the quality of direct push is definitely not low.

With ALO Continental V2 push, the high frequency is more pleasant, the low frequency is increased a little, because it is a gall amp, the middle frequency becomes much more mellow, listening to the overload of the front row pickup of the Fender guitar of Blues** will be very good, listening to some frequency bands of prominent vocals such as babyface will have unique overtones, as if it will have a physical resonance with one of your nerves.

The 701 is not particularly demanding on the sound source, and there are a lot of good decodings of two or three thousand now, but you need to determine the style you like. Among the amps, it is generally accepted that the best 701 is the RVK of Audio Valve, which can perfectly present the gorgeous timbre of the 701, but for most people, the RVK is a bit expensive. Push a headphone with more than 10 times the amp, it must be true love and a tyrant.

Therefore, the average person's choice will probably be three or five thousand yuan. At present, there are more praises such as Shanyun 301Pro, Red 2 Encore, Little Hedgehog, JC Audio HA-800, etc.

But in addition to the headphone amplifier that determines the sound, your front end also has a lot to do with it, and you need to listen to it together. The best way is to go to a good match to listen to it first, and then buy the suit.

I'm pushing K701 with a black voice 3322, it's okay, the control is good. Compared with the direct push, the sound is not floating, and the midrange is thicker. Improvement can be heard in one ear.

Headset type: Wired dynamic headset Wearing style: over-ear.

Plug: The earphone is a mini-XLR interface, the connection cable is a plug (gold plated) Cable length: 3m

Product weight: 240g

Product accessories: turn to gold-plated plugs.

In terms of headphone wiring, K702 is a unilateral 3-wire unbalanced driver headphone, if you need to change the wiring by yourself when connected to the balanced headphone amplifier, please pay due attention to the plug quality and interface model.

In terms of tuning, the K702 three-frequency energy distribution is relatively balanced, and specific frequency bands will not be too prominent, unless the style of the front-end equipment is too strong. The K702 is also positioned by AKG as a reference headset.

In both respects, AKG can be considered a "balanced" headset.

Hello, landlord, I am using AKG now

K601, you know that the sound of 601 is dry and cold, and the impedance is high, so it is not easy to push it well.

The impedance of the 701 is 64 ohms and the sensitivity is 105db. The impedance of the 601 is 128 ohms and the sensitivity is 101db. From here, both the impedance and the sensitivity are 601 difficult to push.

There is a knowledge here that I want to explain, the sensitivity is the push, and the impedance is the push. If you want to have both, this headphone amplifier must not only have high power, but also have superior cable workmanship (the 701 is also a flagship anyway, and it will not work to simply serve it.) ）

For the 701, although her parameters may be lower than some earbuds, but, after all, she has such a large headphone unit, and a small earphone amplifier will not work. When I bought it, I was still in college, and I was short of money, so I chose 601 in order to buy a decoded headphone amplifier. Before buying, I also auditioned a lot of them, such as 701, 702, 650, 600 and other flagships.

For my listening style, I prefer female voices and classical musical, as well as OST. Not very specific, 601 voice dry and cold, so I needed a warm amp to moisten her voice and make it sweeter, I chose oak on the recommendation of a friend

warmheadphone

amp, abbreviation.

oakwha。There must be improvements when it is improved, but if you want to achieve the effect of the audition, you have to continue to burn. If it is solved and upgraded, I plan to get a Tanizu.

U2, integrated, good appearance, good workmanship. I think the 701 would fit in.

As for the landlord who wants to know more information, he can go to the headphone altar or the headphone club, their evaluation has the element of a gunner, but it can still be used for reference. If there are any questions, the landlord can continue to ask, hoping to help you.