How to replace the toilet drain and how to clean the toilet drain

Rust is normal, and if you don't get used to it, buy a bucket of paint brushes, and you can also prevent rust!

The sewer pipes are shared, if you want to change it, you have to replace it collectively, it is more difficult, if conditions permit, take a PVC sewer pipe on the outer wall.

1. After the installation of the water pipe, the pressurization test must be carried out: the pressurization test is generally carried out under the condition of double water pressure, and there should be no water leakage in the test.

2. A simple test method without pressurization, but it is not completely feasible.

Close the main valve of the water pipe. (i.e. the water pipe switch in front of the water meter).

Turn on the faucets in the room for 20 minutes, making sure there is no more water and turn off all the faucets.

Turn off the water inlet switch for equipment with a water storage function, such as toilet tanks and washing machines.

Open the main valve of the water pipe.

Check the meter for movement, including slow movement, 20 minutes after opening the main valve. If there is movement, it is a water leak. If you don't move around, you'll probably be fine.

If there is a problem with the water meter or if the water pipe is slightly percolated, it may be difficult to determine. Therefore, it is recommended that the water pressure test experiment must be carried out after the construction, generally 8 kg, and the time is 20-30 minutes.

3. Water pipe direction: It is recommended that the water pipe go to the top is the safest. The main reason is that most of the waterway reconstruction is done by dark pipes, and the characteristic of water is that water flows to a lower place.

If the pipeline goes underground, it is difficult to find the leakage in time once it occurs, and the leakage will only be found if the water overflows or the floor is deformed and leaks downstairs, and it is difficult to find the leakage because the water pipe is buried in the dark. At this time, the huge loss is irreparable, and even seriously affects the friendly neighborly relationship; If the water pipes go to the top, it may be more expensive to change the water, but as a long-term investment, it is worth it. Even if the water pipe goes to the top, even if the water leaks, it can be found in time, which is convenient for maintenance and the loss is small.

1. The method is to go to the mall to buy a sewer tool, one: 13 yuan.

2. You can ask a professional to come to your home to help you get through, **: 30 yuan. (Different places** are not necessarily the same.) ）

3. If there is a long hard skin water pipe at home, you can try it yourself, stretch the water pipe until it is poked down, and the other end of the faucet is connected to amplify the water, pay attention to the phenomenon of watching the water overflow of the toilet, if you don't worry about the stench, you can deal with it yourself, I have tried to get through it like this, but then you still have to endure the stench.

Generally, it is cleaned with toilet cleaner and 84 disinfectant, but if it is an iron pipe, you should pay attention to cleaning it several times, because it is corrosive.

Use a mighty brush to brush it.

OK. There are 2 ways to do this:

1. Negotiate with the owner downstairs to change the original pipeline directly from downstairs. This method is not prone to clogging problems. 2. Raise the floor of the bathroom.

The elevation of the floor is directly proportional to the drain in your toilet. If your room height is enough, you can choose this method, but this method may cause sewer blockage in the later stage, so you need to be cautious.

Do the math how much it will cost you to renovate your home

The bathroom is a very important part of the renovation, and the sewer pipe is the top priority of the bathroom. If the sewer pipe is not installed well, it is easy to cause pipe blockage and affect the later life. So can the bathroom sewer pipe be changed?

Can the bathroom sewer pipe be changed.

Whether the bathroom sewer pipe can be changed depends on the specific situation, if you live on the first floor, then you can change it. If you live on the second floor or above, you will need to negotiate with your neighbor upstairs. It is best not to change the sewer pipe in the bathroom, because it is not only related to the drainage of your own home, but also affects the drainage of users upstairs.

What should be paid attention to in bathroom decoration.

1. When decorating the bathroom, the waist flower and size of the tiles should be designed in advance, so that it is easy to calculate the number of tiles. In addition, the tile should be non-slip, the safety factor is relatively high, and the floor tile needs to be aligned with the wall joint when paving, so that it is more neat and beautiful. When using tile caulk, you can debug it first, so that you can know the approximate dosage.

2. When decorating the bathroom, you should do a good job of waterproofing, the bathroom is the place where water is used most frequently, if the waterproofing is not done well, it will directly affect the future life. The ground and wall are an important part of waterproofing, the ground is not waterproof, there will be water leakage, and the wall is not waterproof, it is easy to mold. After the waterproofing is done, a closed water test is required, and the next step can only be carried out after the test is correct.

3. When the bathroom is decorated, a shower room can be designed, so that the area can be divided. The shower room can be designed with a window to facilitate ventilation. In addition, the door boundary of the shower room can be designed to be a little higher, so that the water in the shower room can be prevented from overflowing.

The glass of the shower room should be filmed, which can prevent the glass from breaking and is safer.

Enter the area and get the decoration for free**].

It can be changed, but the following points need to be considered:1Pipeline Location:

Restroom sewer pipes are usually fixed, and it is important to consider whether the new plumbing can be connected to the existing sewer pipe. 2.Pipe Material:

The toilet sewer pipe is usually PVC pipe or cast iron pipe, and it is necessary to choose the appropriate pipe material according to the actual situation. 3.Pipeline Construction:

Altering the sewer pipe requires construction, and the impact of the construction on the use of the restroom, such as noise, dust, etc., needs to be considered. 4.Laws and Regulations:

Alterations to sewer pipes need to comply with local laws and regulations, such as the need to apply for relevant building permits. Therefore, if you need to change the toilet sewer pipe, it is recommended to find a professional plumbing engineer for consultation and construction.

Communicate with the property owner first, and if the communication fails, you can sue. The tenant or landlord of the house has the right to be the plaintiff, and if the damage is caused, the landlord as the plaintiff claims compensation for the loss of renovations, and the tenant can also claim compensation for the loss of property as the plaintiff. The two may be indicted separately and then tried together.

Property Law of the People's Republic of China:

Article 71 The owner shall exercise ownership of the exclusive part.

The owner has the right to occupy, use, benefit from and dispose of the exclusive part of his building. The exercise of the rights of the owner shall not endanger the safety of the building and shall not harm the legitimate rights and interests of other owners.

Article 92 Damage shall be avoided when using adjacent immovable property.

Where the owner of the immovable property rights uses the adjacent immovable property for the purposes of water use, drainage, passage, laying pipelines, etc., it shall try its best to avoid causing damage to the adjacent immovable property rights holders; Where damage is caused, compensation shall be given.

Sewer is a very important arrangement in the bathroom, and it is also the most important part of the comfort and convenience of the bathroom. There are also many precautions in the selection of the diameter of the toilet sewer pipe. Nowadays, the sewer pipe material generally used is PVC, with an inner diameter of 110, and a pipe with an inner diameter of 120 can also be used.

In fact, there is no standard for the diameter of the toilet sewer pipe, and it is based on the layout of the toilet to choose a different bathroom sewer pipe diameter. In this way, we can better reflect the sewage and drainage work of the bathroom. What are the diameters of bathroom pipes?

The nominal outer diameter is generally available.

When using PVC sewer pipes for arrangement, they are all used in the way of bonding, for example, the diameter of the bathroom sewer pipe is 90, which is generally called 90 pvc sewer pipe on the market, if the diameter of the toilet sewer pipe is 75, it is called 75 pvc sewer pipe, and so on.

Several sewer pipe diameters are commonly used. The outer diameter of the outlet is 32mm, the inner diameter of the inlet pipe is 32mm, the outlet sealing cover is 60mm, and the expansion and contraction of the pipe is about 40cm to 110cm. According to different toilets, when choosing the diameter of the sewer pipe, it is also necessary to consider whether the sewer pipe drainage, water inlet and toilet drain pipe are consistent.

Find a professional master who dredges the pipes, and give some money to solve it quickly. You can find property management.

When encountering such a problem, one is to ask the dredge workers to help. You can also make your own. 1. Choose a wire that is not too thick; 2. The front end is bent with a hook; 3. Slowly reach into the toilet drain; 4. Try to hook it out, don't be in a hurry when you hook it, be patient, and don't hook it a few times at a time.

Of course, it is a good way to ask for professional dredging people, so I won't talk about it here, everyone on earth knows it. What I want to talk about here is to use a toilet plug to dredge, when using a toilet stopper, the most important thing is the speed of pumping the toilet plug up and down, the faster the better, which is like an electric hammer, with the frequency of vibration even the concrete can be opened, a toilet blockage. It was solved very quickly.

Toilet sewer is one of the very important pipes in the home, which is often used to discharge waste water, feces, and other substances. If there is a blockage in the sewer or other problems, it will cause trouble and inconvenience to daily life. The following are the steps and methods for repairing toilet sewers:

1.Precautionary measures.

In order to avoid clogged sewers as much as possible, we can take the following precautions:

a.Do not pour food scraps and utensils down the toilet.

b.Do not throw garbage, such as paper, sanitary napkins, and wet wipes, into the toilet.

c.Clean your drains regularly.

d.Use a sewer filter.

2.Use a sewer uncrusher.

If the sewer is clogged, we can use a sewer unclogger. Inserting the unclog into the drain and pumping up and down until the blockage is pushed out, this hood is a very simple and effective method.

3.Use chemical cleaners.

If the drain is serious and the unclogging doesn't work well, you can try using some chemical cleaners. These cleaners can be poured directly down the drain and then wait for a while in the dismantling room to allow the chemical reaction of the cleaner to dissolve the blockage and wash it away.

4.Dismantle the sewer.

If the sewer still can't be unblocked after trying the above methods, then you need to disassemble the sewer to clean it. First you need to close the sewer valve, and then use a wrench to unload the sewer and manually clean the dirt and debris in the pipe.

In short, in order to keep the sewer in good condition, we need to clean it regularly, pay attention to the taboos of daily use, and deal with the problems that arise as soon as possible. If you are struggling with cleaning your sewers, then don't hesitate to ask a professional to repair or clean it.

The toilet sewer switch is located at the drain outlet under the toilet floor, and is used to conceal the switch device that controls the flow of wastewater into the sewer before it is destroyed. When the sewer is clogged, the sewer switch needs to be replaced, and this article will explain how to replace it.

Step 1: Prepare tools and materials 1, hand drill or hammer and nails. 2. a wrench or pipe wrench. 3. New sewer switch. 4. Glue.

Step 2: When you turn off the main water valve and replace the sewer switch, you need to close the main water valve of the toilet first to ensure safety.

Step 3: Clean the old sewer switch with a hand drill or electric hammer and nails, pry the old sewer switch open and take it out. Unscrew the spout with a wrench or pipe wrench and clean up the pipes of trash and residue.

Step 4: Install the new sewer switch Install the new sewer switch to its original position, screw the sewer nozzle back on, and fix the new sewer switch to the ground with glue.

Step 5: Test the new sewer switch to open the main water valve, and test whether the new sewer switch is working properly. If it is normal, drain the wastewater and check if it is drained properly.

Summary: Replacing a sewer switch requires the use of some tools and materials, such as hand drills, wrenches, and new sewer switches, etc. Before replacement, you need to close the main water valve, and use a hand drill or electric hammer to take out the old sewer switch, and clean the inside of the pipe, and finally install the new sewer switch, and test whether it works properly.

Replacing the sewer switch needs to pay attention to safety and can be operated by professionals.

If you're going to convert your kitchen into a toilet and need to deal with the drains, here are some possible solutions:

1.Probably the easiest option is to connect the kitchen directly to the sewer of the new toilet. Doing so requires connecting the old kitchen drain with the new toilet drain.

You may need to hire a plumber to do this job and make sure to get the necessary approvals and permits before performing any work.

2.If it's not possible to connect the two sewers, you may need to reinstall the sewers so that they fit more intimately into your new toilet layout. This can be done by increasing the length of the pipe, decreasing the angle of the pipe, or increasing the diameter of the pipe.

This type of work can be complex and requires hiring a professional plumber to do it.

3.You can also consider pre-treating the wastewater by using a method similar to a reservoir or separating sedimentation tank before discharging it into the sewer. Such a Tracer Cave arrangement is more complex, requires a higher budget, and may require additional permits.

4.Finally, if the new toilet unit will add additional load to the pipes that are responsible for the old kitchen drains, you may want to check the backflow prevention measures in the dry drains, such as exhaust pipes, gate valves, etc. These measures may be necessary to ensure that the newly installed toilets are perfectly coordinated with the sewers.

Whichever method you take, don't forget to get the necessary approvals and permits first. In general, it is best to consult with the relevant authorities to understand all legal requirements and requirements.