How to cancel the P file of a simple electric car, and how to cancel the P file of an electric vehic

You need to press and hold the P button to release, and some electric vehicles need to hold down the P button and twist the knob to release.

Electric vehicle is a kind of travel tool that is often encountered, the structure of such a travel tool is simple, the use cost is low, the size is small, the weight is light, and it is a kind of travel tool that is more suitable for driving in the urban road.

The key components of an electric vehicle include the frame, electric motor, battery, and regulator. The function of the regulator is to regulate the circuit of the whole car, if there is no regulator, the electric vehicle is unable to operate normally. The adjuster is mostly fixed under the rear seat.

The electric motor is the first of the electric vehicle power, and the electric motor can drive the electric vehicle forward.

The battery is a part of an electric vehicle that is used to store electrical energy, and the battery can supply power to the electronic devices of the whole car. The battery is also a wearing part that needs to be replaced regularly, and the performance of the battery may continue to deteriorate as the number of charge and discharge times increases.

During charging and discharging, the ions in the battery will be in the electrolyte.

Some ions react chemically with the electrolyte as they move in the electrolyte.

As the number of charge and discharge times increases, the number of ions in the battery may also continue to decrease, and of course the performance of the battery may also continue to decline.

If you can maintain accurate car habits, this can still have an effect on extending the life of the battery. When charging, be sure to use a suitable charger and be sure to avoid overcharging the battery.

Generally, in the left-hand position, there is a button, the luxury model needs to press and hold the P gear turn knob to release, and the simple model can be released by holding down the P gear for three seconds or pinching the brake handle.

Notes:New national standard. The electric vehicles produced after the implementation are in line with the latest national standards, and the new standard has regulations on the speed of electric vehicles, and requires manufacturers to add tamper-proof designs when designing.

If you want to greatly increase the speed, you need to replace the high-power controller, motor and battery, which is equivalent to buying a new electric vehicle, which is not only very costly, but also illegal. Therefore, the electric vehicle is limited in speed, and only needs to lift the controller and the motor output power.

It can be achieved by increasing the battery current, but it is not recommended to do it without affecting normal travel.

You don't need to press the key at the same time, just press the p again, and you can turn the handle when the LCD screen is unlocked.

There are two ways to lift the P file of an electric vehicle:The first is that when the vehicle is parked for a long time, the P gear is automatically locked, and then pinch the brake and observe the elimination of the P sign on the dashboard, which means that the P gear is lifted.

Introduction to the P file of electric vehicles:

The P gear of an electric vehicle is the gear that locks the power of the vehicle when the electric vehicle is parked. The main purpose is to prevent the situation of accidentally turning the handlebar when temporarily stopping and the vehicle starts quickly and flies out.

Especially for some children who are more curious, often like to touch some things, if you accidentally start the electric car, if there is no parking lock, it is easy to cause harm to children and nearby people, P file can effectively prevent safety accidents caused by children's misoperation.

How to turn off the P gear of the battery car:

1. Press the P button directly. There are many electric vehicles P gear has a special button, want to lift it is relatively simple, only need to press the P file button, generally speaking, press the P file on the dashboard for two or three seconds The word P file disappears to be lifted, so that you can ride the vehicle normally.

2. Press P gear and brake. There are some electric car assignment mountain simply press the P gear is not able to be lifted, then in this case you can try to press the P gear at the same time to screw the brake gear to the end, generally speaking, keep it for about three seconds, the P gear on the dashboard will disappear so that the car can move forward.

3. In addition, there are some electric vehicles that need to press the P file after the P file is pressed, and then you also need to press the horn button of the car, that is to say, the P file button and the horn button are pressed at the same time, so that the P file can be released.

4. Or some electric vehicles need to twist the acceleration knob after pressing the P gear, screw the acceleration knob to the end, and hold it for about three seconds to release the P gear.

The principle of the P file of the battery car:

The battery car P file is a new function, it and the car P file is very imaginary, its main function is to prevent the battery car from running, which can be a good way to prevent the driver from inadvertently turning the handle to cause a speeding accident.

For example, if a child or other person does not understand and turns the battery car without turning off the power, if there is no P gear at this time, the battery car will fly out quickly, and people may also be injured, which often happens.

If you want to permanently turn off the P-stop function, you need to dock the two wires inside the P-stop button, so you can do it.

Generally, in the left-hand position, there is a button, you need to press and hold the P gear knob to release, or press and hold the P gear for three seconds, and pinch the brake handle to release. P gear is equivalent to the parking (parking) gear of the car, it can be started after pressing it, you need to press it when you start, and it will be locked after stopping for a long time, and you need to press it when you stop for a long time.

The role of the P gear of electric vehicles.

The P gear setting of electric vehicles is mainly to prevent danger caused by misoperation, and to prevent novices, the elderly, and children from flying due to improper operation. This can effectively reduce the occurrence of electric vehicle accidents. Shen pure sedan chair.

The safety of the P file is high, but it brings great difficulty to the maintenance of electric vehicles, mainly because the function settings of each manufacturer are different, and the circuit principle is not the same! In this way, it is necessary to understand the principles of all models before repairs.

I advise you not to do such a thing, if you don't check it, you will be severely punished.

Disassemble the P file switch, and docking can permanently relieve the P file trouble.

Generally, it is set automatically by default. The electronic handbrake is at the knee of the left leg, press it once, and pull the handbrake; To lift it up, it is to lower the handbrake.

After braking, no matter whether you step out of hold or not, as long as you don't enter the P gear, the ignition will be turned off in any other gear, and the automatic N gear will be automatic. If you enter P gear before turning off, there will be no automatic handbrake. So every time I turn it off, even on the slopes, because it automatically puts the handbrake into neutral at the same time as it turns off in any gear except P.

Therefore, stopping on a ramp will not damage the gears of the transmission, and the car door will be automatically in P gear when the engine is turned off. This design is really human!

Go to the electric car repair place and have a look and let them help you.

Summary. Dear, hello, happy to answer for you; There are two ways to lift the P gear of the electric vehicle: the first is that the P gear is automatically locked when the vehicle is parked for a long time, and then pinch the brake and observe the elimination of the P logo on the dashboard, which means that the P gear is lifted; The second method is for some vehicles with a P gear button, in the case of P gear open, press and hold the P gear button to release, this button is generally located under the right or left hand of the vehicle fuel handlebar.

How to remove the P gear of an electric car.

Dear, hello, happy to answer for you; There are two ways to lift the P gear of the electric vehicle: the first is that the P gear is automatically locked when the vehicle is parked for a long time, and then pinch the brake and observe the elimination of the P logo on the dashboard, which means that the P gear is lifted; The second method is for some vehicles with a P gear button, in the case of P gear open, press and hold the P gear button to release, this button is generally located under the right or left hand of the vehicle fuel handlebar.

The P gear of an electric vehicle is the gear that locks the power of the vehicle when the electric vehicle is parked. The main purpose is to prevent accidental turning of the handlebar when temporary parking, the situation that the vehicle starts quickly and flies out, especially for some children who are more curious, often like to touch some things, if you accidentally start the electric car, if there is no parking lock, it is easy to cause injury to children and nearby people, P file can effectively prevent safety accidents caused by children's misoperation.

The P stop is permanently lifted.

The P gear cannot be removed.

If you want to permanently turn off the function of P gear, you can disassemble the front panel of the electric vehicle, find the power unit, and connect the two wires inside the P gear switch to positive and negative docking, and you can remove the P gear from permanent shutdown.

What is the power line where and where, the power line is what electricians often call the "main circuit", that is, the power line that is directly connected to the final electrical equipment.

Summary. Hello, there is generally a button in the left-hand position, you need to press and hold the P gear knob to release or hold the P gear for three seconds, and pinch the brake handle to release.

Hello, there is generally a button in the left-hand position, you need to press and hold the P gear knob to release or hold the P gear for three seconds, and pinch the brake handle to release.

1. There are usually two ways to share the P file of an electric vehicle. The first method is to automatically lock the P file when the vehicle is parked for a long time, press the brake, and check whether removing the P mark on the dashboard means that the P file has been resolved. The second method is suitable for some vehicles with a P button to dig into the hinter.

2. The function key of P gear is mainly for the driving safety of electric vehicles, that is, to prevent deviation. The old over-standard vehicles usually did not have a P gear button, but the new national standard stipulates that the national standard electric vehicle should be equipped with a P gear, the purpose of which is to prevent accidents caused by accidents caused by accidental or unintentional imitation of the nose and lack of thought handles.

3. Different models and specific gears are different. The components of an electric vehicle include mechanical systems such as electric drives and abrasive limb control systems, power transmission and working devices that complete set tasks. The electric drive and control system is the core of an electric vehicle, and it is also the biggest difference from the internal combustion bridge machine.