I have a 5G signal here, why don t I show a 5G signal?

Use a 5G network.

You can perform troubleshooting based on the following conditions:

1. Hold a 5G mobile phone terminal;

2. The address has 5G network coverage;

3. You need to turn on the "5G network" switch of your mobile phone.

Warm reminder: 2G, 3G, 4G users do not change their cards, do not change their numbers, do not change their numbers**, with the above three conditions, they can also log in to use the 5G network, but if they handle 5G**, they can enjoy a higher speed.

Hello, I'm glad to answer for you, reasons why 5G phone not showing 5G and how to fix it:1The 5G switch of the mobile phone is not turned on, the solution:

Pull down the mobile phone control menu, there is a "5G" logo, click to open the 5G function. 2.The current mobile phone usage environment does not have a 5G signal, when there is no 5G signal nearby, even if the mobile phone you use supports 5G, the mobile phone will display and use the mobile phone system bug because there is no 5G signal, resulting in a 5G signal, but not using 5G, this situation can be solved by restarting the mobile phone.

Summary. 1. First of all, make sure that the OPPO mobile phone you are using supports 5G (take OPPO Reno5 as an example), click the [Settings] button to enter the system settings menu.

2. Click the drop-down menu page to enter the [SIM Card and Traffic Management] option, and then find the network settings menu bar.

3. The switch behind [Start 5G] and [Smart 5G] is the 5G network switch, if the [Smart 5G] phone is turned on, it will automatically switch between 5G and 4G networks according to the network environment.

Why is my phone not showing 5G signal.

Hello, I am helping you to inquire about the relevant information, and I will reply immediately.

Hello, I am helping you to inquire about the relevant information, and I will reply immediately.

Hello, what is the model of the mobile phone, can you tell me!

oppooppo

Hello, your mobile phone supports 5G function, if there is no 5G support, it means that there is no 5G base station near you!

Yes, it's been shown before.

Yes, it's been shown before.

Hello, there is no 5G at the base station near you, and if there is a 5G signal, it will come out!

Not in the settings.

Not in the settings.

1. First of all, make sure that the OPPO mobile phone you are using supports 5G (take OPPO Reno5 as an example), click the [Settings] button to enter the Zhengmai system settings menu. 2. Click the drop-down menu page to enter the [SIM Card and Traffic Management] option, and then find the network settings menu bar. 3. The switch behind [Start 5G] and [Smart 5G] is the 5G network switch, if you turn on the [Smart 5G] mobile phone, it will automatically switch between 5G and 4G according to the network environment.

Not really.

Not really.

What is your specific phone model?

1.We all know that too much memory on your phone will slow down, which may affect your network speed. So when the network slows down, we can solve the problem by restarting or entering airplane mode and exiting.

2.If the mobile phone has security software installed and the traffic monitoring is set, when your traffic** is used up, the software will actively prohibit all software from connecting to the Internet, so check the traffic settings of the security software in the mobile phone.

3.When the mobile phone has a signal but no network, you can try to remove the SIM UIM card, and then install it on another mobile phone that can access the Internet without any problem, if the mobile phone can access the Internet, then there is a problem with your original mobile phone, it is recommended to go to the after-sales service to detect it. On the contrary, it is a problem with the SIM UIM card, and it is recommended to go to the business hall to change the SIM UIM card.

1. The mobile phone number is not turned on 5G**The network in the upper left corner shows 5G, which can only mean that your mobile phone is a 5G mobile phone.

It doesn't mean that you have 5G** turned on, just measure the Internet speed, or 4G speed.

The performance goals are high data rates, reduced latency, energy savings, cost reductions, increased system capacity, and large-scale device connectivity. The first phase of the 5G specification in Release-15 is designed to accommodate early commercial deployments.

The reason why the mobile phone is not visible and does not show the 5G network:

1. The mobile phone is in arrears: the 5G network cannot be used, and the mobile phone will turn off the 5G network and turn on other types of networks. The top-up credit will be restored.

2. The mobile phone does not support the 5G network, and the operator does not have a base station here or has too few base stations: the 5G signal cannot be covered. Recommendations can be made to the operator.

3. Mobile phone SIM card failure: In this case, you need to go to the business hall for SIM detection in time to avoid affecting your own use.

4. The mobile phone system crashes: You can restart the mobile phone or set the airplane mode, wait for 5 seconds and then turn off the airplane mode, and the signal can be restored.

5. Mobile phone case interference signal: whether to use metal protective shell, magnetic protective shell, magnetic bracket and other accessories, metal and magnetic materials are easy to interfere with signal reception, it is recommended to remove the accessories to view.

6. Dirt or oxidation on the metal surface of the SIM card: it will cause unstable signal reception, which can be viewed after cleaning.

Advantages of 5G:

2. The air interface latency is as low as 1ms, which can meet real-time applications such as autonomous driving and telemedicine.

3. It has the ability to connect millions of square kilometers of equipment to meet the communication of the Internet of Things.

4. The spectral efficiency is more than 3 times higher than that of LTE.

5. Under continuous wide-area coverage and high mobility, the user experience rate reaches 100 Mbits.

6. The traffic density reaches more than 10Mbps m2.

7. Mobility supports high-speed movement of 500km h. <>

There are not many cities in China that have opened 5G services, so 5G mobile phones.

You can only use 4G services, and the network speed.

Naturally, it is the speed of 4G, and another reason is that the mobile phone is not turned on 5G**, so naturally 5G will not be displayed.

First of all, the 5G signal is not fully covered, which means that the signal is only available in the place where the first business is set. Telecom can call 10000 customer service for consultation, and China Unicom can use the mobile app

The client (Service-Innovation-5G) checks the 5G signal coverage location and finds the closest signal point to the user to have a 5G signal.

In addition, the user will use the same carrier SIM card as otherwise normal.

Install to the present. If there is no problem, it may be a SIM card problem, and it is recommended that the user contact the operator to replace it. (5G-enabled phones can use the 5G network with the original SIM card.)

There is no need to change the 5GSIM card, and you can consult the operator for specific questions. ）