How to install CAD software in Win8 system

1. Tools required: 1. A computer;

2. CAD2014 installation software;

3. The computer has been installed on the system;

Second, the specific steps:

1. First of all**AutoCAD2014, 32-bit and 64-bit depending on personal choice, memory 4G or more is recommended to install 64-bit. **AutoCAD 2014 is a self-extracting format (as shown in the figure below);

2. Double-click the AutoCAD installation file to start automatic decompression, just select a decompression path (as shown in the figure below);

3. After decompression, open the decompression folder. Run as an administrator to start the installation. The installation interface appears, click the install button in the lower right corner (as shown in the figure below);

4. Select the country and region, accept the license and service, and click Next. Then select the language, the license type is stand-alone, enter the serial number 666-69696969 and the product key 001f1 below, a green tick will appear after entering, and then click Next (as shown in the figure below);

5. Then select the installation path, generally only modify the drive letter. Once you've selected your path, click Install below. Then it's just a matter of waiting for the installation to complete, which may take a few minutes (as shown in the image below);

6. The installation is successful (as shown in the figure below);

2. When installing the program, try to install the file and then install the system disk except for the C disk;

1 The first step is to open the Control Panel and select the Programs & Features option!

2Step 2: Select the upper left corner to start or disable the Windows function, and then open the + sign of the first selection! Click on the first option.

Yes, it is not stable to install with compatibility or management users.

It can be installed from Master Lu.

The 2010 version or above is OK, and the 2010 version of the general computer configuration is enough. Here's how to fix it:

1. Unzip the CAD installation package first, and then open it.

2. Find the installer and double-click it to start the installation.

3. Select Next, then select I Accept, Next, and finally enter the information that must be filled in according to the prompts, and click Next.

6. Select Installation, Installation is complete, and the selection is complete.

7. Start the software, follow the steps, and the installation is complete.

Here is the 64-bit version of AutoCAD 2014:

Please let me know if you need another version.

Such a new system, the computer configuration should be good, it is recommended to use the new version of CAD, which has many functions and is convenient and fast to draw.

For example: 64-bit AutoCAD 2014

CAD is available, but if you want to use it best, WinXP is better.

Step 2: Click on the "Stand-alone Installation" button.

Step 3: Click "Install".

Step 4: Accept the "Installation Agreement".

Step 6: Enter the installation information.

Step 7: Select the "Typical" installation.

Step 8: Select the "Installable Tool" that needs to be installed.

Step 9: Configure the installation path.

Step 10: Start the installation.

Step 11: Installation, wait for the installation to be completed.

Step 13: After the cracking is completed, AutoCAD2007 can run smoothly.

Then change to a higher version of CAD, such as etc. This system doesn't support it and can't do it.,If you have to install it on win8, it's not impossible.,It's a little hard to refer to this.。 But if it's done, it's a little fulfilling, try it, and I wish you success.

1. Change the installation package, some CAD2010 installation packages are green version, or re-use the software packaging tool to package the installation program, in addition, you can change to a higher version.

2. Run the CAD2010 installer in compatibility mode, right-click on the installer and select "Properties", select "Compatibility", and then install it in the order shown in the following figure to select the system mode that the program can be compatible with.

Whether you are a 32-bit system or a 64-bit system, the 32-bit system can only install 32-bit CAD, and the 64-bit system can only install 64-bit, it has nothing to do with compatibility.

It can be installed.,My colleague is win8.,But it's not the CAD I installed for him.

Compatibility issues, you need to adjust the compatibility, or install w7

Yes, you must install Microsoft NetFramework before you can install the CAD2007 program.

The reason is that the CAD2007 auxiliary plug-in only supports Microsoft NetFramework, and the outdated version of Microsoft NetFramework does not support the operation of CAD2007 software.

microsoft.The .NET Framework is an internal Windows component that enables you to build and run next-generation applications and XML Web Services.

The CAD installation steps are very simple:

Open the installer's tarball;

Find, double-click to run;

Then select the installation directory and installation components, generally in addition to setting the location you want to install, other default settings can be;

Continue to click Next until you are prompted to belong to the product key, and enter the product serial number from the installation package. The serial number in the txt file, the format of which is 111-1234567, you need to try several keys one by one, only one is suitable for the installation of personal computers, not the first one is the product key suitable for your own computer;

Then keep clicking Next until the installation is complete.

Restart the program to complete the installation and start using it.

You can install the installation method after you install the net framework first: Control Panel - Programs and Functions - Enable and Disable Windows Functions on the Left - Select Net Framework, and the system will automatically install it after you are sure I installed it in 2010 View the original post

Remember to adopt it.

The installation steps are as follows;

9. Click "Done".

It stands to reason that versions of CAD 2009 and later can be installed in Windows 8 Enterprise Edition (Windows 8 Developer Preview and RTM are not very compatible with CAD software). First of all, before installing CAD, it is best to check all the drivers and patches that need to be repaired or updated, and you can do this with the driver wizard. In addition, you mentioned in the question "need to install net" or something, I think, it should be net, after the installation is completed, you need to restart to take effect, otherwise, you can't activate all the functions of net, CAD naturally can't install normally.

Normal installation is enough, do you still need to ask? I'm also win8 pro x64 with autocad 2010 installed