-
I don't understand your question.
-
Reason 1: Distance problem: The transmission of wireless network has a certain distance limit, so users will have the problem of disconnection when using the network at the edge of wireless network signal coverage.
Reason 2: The signal strength of the router is not enough, which will also cause the wireless network to drop the connection, if there is a condition, you can replace the router with a new one.
Reason 4: Due to interference from other signals, users can find out the source of interference and keep it away from the source of the wireless network signal.
Cause 5: If the NIC driver is missing or the NIC driver version is incorrect, we recommend that you update the driver or replace it with the correct driver.
Reason 6: If there is a problem with the hardware of the rental equipment such as computers or mobile phones, it is recommended that the user ask a professional to repair it.
Ways to increase the speed of WiFi: 1. Increase the rate of the router, first click to enter the settings interface of the router, select the "Security Settings" option, and then turn the router rate up and set the router as the protocol, using a single protocol can also increase the rate. 2. Place the router in the first position of the house, so that the placement is conducive to the transmission of signals.
3. Multiple road-type wheel drivers can be connected through the router bridging function, so as to expand the signal transmission range.
-
There are many reasons for the disconnection, so let's do a two-step simple try:
1. Check whether the computer network cable of the shared wifi is plugged in and whether the network speed is powerful.
2. Try restarting the Wi-Fi on your phone.
If the wifi is still unstable, try further processing:
1. Upgrade the wireless network card driver of the computer.
If the driver is too old, even if it is successfully turned on, the signal may not be good, which will affect the Internet experience.
2. Turn off the ARP firewall of your computer.
The firewall of some security software turns off the wireless process, and you need to turn off the LAN protection.
3. Modify the sleep settings of your computer or mobile phone.
If your computer or phone is set to sleep on a scheduled basis, it will be disconnected from the internet when you use it, and you need to modify the sleep settings in your power plan.
-
Router Setup Interface - Network Parameters - Rate and Mode, Modified to 10m Half Duplex Full Duplex, Save.
If your router doesn't have this setting, then it's time to upgrade your router software.
-
There are many reasons for this problem,First of all, you can update the wireless network card driver,Or use the machine to connect to other wireless networks to see if it is normal,First rule out the problem of your own wireless network card,Then look at the problem of wireless routing,You can initialize it,Or in the wireless settings to see if the network transmission mode is consistent with your own computer。 If necessary, change the route to see if there is a routing problem. This is the only way to rule it out.
-
1. There is a problem with the wireless router. 2. There is an ARP attack in the network, and someone is limiting your network speed.
-
It could be a tower signal issue, which I sometimes do.
-
Is it that the strength of the network asterisk is not enough?
There are three common criteria:
Using the 5GHz band, the transmission speed is 54Mbps, which is not compatible with it. >>>More
The method is as follows: 1. Open the router and plug the original cable of the home broadband into the computer directly into the WAN port of the router (see the manual); Find another network cable to plug in the LAN port at one end (marked on the router) and plug in the desktop computer at the other end; >>>More
Big brother, how can you see that you have this tendency? b Khan.
As a result, the wireless LAN will be affected by the radio frequency interference of some sudden wireless devices in the same frequency band in the actual operating environment. Such as microwave ovens, Bluetooth mobile phone signals are in the frequency band. Therefore, when working on a wireless LAN, suddenly turning on a microwave oven in its area, or using a Bluetooth headset on a Bluetooth mobile phone, or suddenly having other wireless devices running in the same frequency band will interfere with the wireless signal of the wireless LAN. >>>More
2. Check whether the wireless network card driver is successfully installed in the computer device manager, and check whether the wireless network card has been started, the method is to click "My computer (win7 system is "computer") on the desktop, and then select "Properties" - Hardware "" - Device Manager, there should be a wireless network card adapter under normal circumstances. >>>More