How to fix the leakage of the ceramic valve core of the faucet

Some netizens mentioned the inconspicuous gasket, but he summarized the quality problem, which is actually a design problem, because the gasket itself is very wear-resistant of nylon, but the contact surface with the copper core is very frizzy and naturally not wear-resistant.

Let's look at the picture first: <>

Repair is better considering hardness and corrosion resistance, that is, suitable thin wire. If the diameter is a little smaller but closer, it is wound twice and then twisted to close the mouth so that the gasket and the bracket avoid direct friction, which is equivalent to two layers of gaskets will transfer the contact surface and correct the wear tolerance at the same time. In addition, the design problem of high friction and fragility is eliminated again, so that the loose core is compressed.

Slightly thicker copper wires can be made directly into an open ring with needle-nose pliers, and cushioned between the bracket and the nylon spacer.

It's just that I haven't done it concretely, just the idea for reference!

However, as the product design is too perfect, the chance of repeated consumption will decline, and the company will make less money, so it is also a conscientious enterprise to do eighty percent!

Jue's customer service told me: the ceramic valve core of the faucet is sealed, it is alumina, **low, very hard, so it is wear-resistant, long service life, and the metal is not as wear-resistant, they say that most of the faucets on the market are ceramic valve cores.

Water leaks are common. Spool.

Aging, replacement.

Ceramic spool. That's it, in.

Hardware store. Or most of the bathroom shops that sell faucets have them. First, remove the color twist under the handle and use a hexagonal spoon (some are smaller).

Screwdriver. Release the handle can be removed, the rest of the work is simple, and the valve core must be positioned correctly when placed, so as to ensure the sealing...

Hello. The ceramic core of the faucet is leaking, and it is impossible to see that there is a problem when you remove it for inspection--- the problem is that the pressure of the old rubber pad on the two ceramic sheets has been reduced. Go to the plumbing accessories store or stall to buy back the same specification of rubber mat (new, soft, thick) and replace it, and the problem of water leakage will naturally disappear.

It may be caused by a mismatch between the replacement faucet core and the original housing, or it may be that the faucet housing is worn. It is recommended to replace the entire set of faucets.

Related Notes:

All kinds of impurities in the pipeline should be completely removed during installation. Spool damage, jamming, clogging and leakage are prevented. At the same time, the surface should be cleaned so that no residue of building materials remains.

There is no need to use excessive force when opening and closing any kind of faucet product, just gently twist or toggle. Even a traditional faucet doesn't have to be wringed to death. In particular, do not use the handle as a handrail to support or use.

Products with a screen cover for the water outlet should be disassembled and rinsed after a period of use to remove impurities. Products equipped with hoses should be careful to keep the hose in a natural stretch at all times to avoid breaking.

The shower head metal hose of the bathtub faucet should be kept in a natural stretch state, and it should not be coiled over the faucet when not in use. At the same time, when using or not in use, pay attention to the joint between the hose and the valve body not to form a dead angle, so as not to break or damage the hose.

The faucet spool is leaking, you can try the following steps to fix it:

1.Close the faucet valve to avoid damaging the faucet.

2.To find the leakage point of the faucet spool, you can gently wipe the spool with a damp cloth or gloves to see if there is any leakage.

3.If you don't find a leak, you can find some small stones or pencil leads on the faucet and gently wipe the valve core to see if there is any leakage.

4.If you find a leak, you can gently wipe the spool with sandpaper until the leak stops.

5.If the leak persists, the spool can be replaced. When replacing the spool, be careful not to damage other parts of the faucet.

Please note that before any repairs are made by Brother Split, please close the faucet valve and make sure the tools you have at hand are clean.

Faucet is one of the common items in life, it can be seen in many places, some families in the process of using the faucet, there will be some problems, such as faucet valve core leakage, etc., this situation makes it more troublesome. So, how to fix a leaking faucet core? What do you need to pay attention to when buying a faucet?

Let's take you to find out.

Find out what causes the water leakage first, and if it is an aging problem, then just buy a new one and replace it. Remove the faucet handle, then use a wrench to open the upper part of the gland, take out the old spool, and install the new spool back. If water is leaking from the periphery of the spool, it may be caused by a loose spool, so you can reinstall it.

Precautions for choosing a faucet.

1. The main body material.

When buying a faucet, you need to pay attention to the material of its body. For this aspect, it is best to choose copper, because the faucet effect of this material will be better in terms of sterilization effect, and it is not easy to corrode, which is more in line with the standard of our human drinking water. During the selection process, you can tap the faucet with your own hands, and if the sound is dull, then it means that it is copper.

2. Appearance. When choosing a faucet, you also need to pay attention to its appearance. Usually, the appearance of the faucet will be relatively smooth, and the overall color is relatively uniform, and there is no scratch or rust.

In addition, when selecting, you can test the flexibility of its switch to see how strong the parts of each part are.

3. a valve core. The spool is like the heart of the faucet, so this part is very critical. It is best to choose a ceramic spool, because it is relatively good in terms of wear resistance and sealing, and it is not easy to leak.

Article summary: The above is all about how to repair the leakage of the faucet valve core and what to pay attention to when buying a faucet, I hope it will help you. If you want to know more about Kuan Kai Trembling, please continue to pay attention to Qeeka Home.

A leaking faucet spool is usually caused by an aging or damaged rubber seal on the spool. Here are some simple ways to fix a leaking faucet spool with a Sakura limb:

1.Purchase a new rubber seal and install it on the spool. When installing, take care to gently insert the seal into the spool hole to ensure that it is securely secured.

2.Turn off the water source and disassemble the spool. When disassembling the spool, the rubber seal needs to be carefully removed to avoid damaging it.

3.Clean the spool bore and the spool itself. Use a detergent and a soft cloth to gently clean the spool bore and spool surface to ensure it is clean and dust-free.

4.Reinstall the spool. Reinstall the spool on the faucet and make sure it is tightly fastened to the faucet.

5.Turn on the water source and test the faucet for leaks. If the faucet is still leaking, the rubber seal needs to be replaced.

It is important to note that a leaking faucet spool can be caused by other factors, such as damaged spool or cracked faucet pipes, etc. Before repairing a leaking faucet spool, check other factors to ensure that the problem is resolved.

Faucet leakage problem analysis.

There are several reasons why the faucet spool is still leaking after it has been replaced: Dameng.

Incorrect spool installation: Confirm that the spool is installed correctly and secured. Check that the spool fits well with the gasket of the faucet.

Valve Damage: There may be damage to the valve, such as a valve disengaging or damaged, that prevents the water flow from being completely shut down. It is necessary to check the condition of the valve parts and replace them in time.

Weathered gaskets: Faucets may deteriorate or break over time, resulting in incomplete sealing. The condition of the gasket needs to be checked and replaced if necessary.

Failure of other parts of the faucet: There may be faults in other parts of the faucet, such as loose connections of the water pipe, damaged joints, etc., resulting in water leakage from the faucet. Check the other parts of the faucet to make sure each one is working properly.

Too high water pressure: If the water pressure is too high, it can cause the faucet to leak even after the spool is replaced. It is necessary to check that the water pressure is normal, and if necessary, to install a pressure reducing valve.

The above are the common causes of faucet leakage, and they should be investigated and repaired according to the specific situation.

1. If the hot and cold water faucet is controlled by the main inlet valve, close the main inlet valve. When the hot and cold inlet pipes are separated, close the corresponding two valves. 2. Use a flat-mouth screwdriver to open the accessories in the above picture "01 hot and cold mark (fix the screw hole plug by hand); 3. Use a counterclockwise (left-handed) screwdriver to insert a flat-edge screwdriver into the handle to fix the screw hole plug (hot and cold standard hole), and the counterclockwise (left-handed) screwdriver is about 3 turns; <

4. Grab the faucet handle with your left hand, pull it up, and gently tap it with the back handle of a screwdriver (it must be a non-metallic material, otherwise it will damage the outer surface of the faucet) to separate the accessory "02 water handle"; 5. Counterclockwise (left-handed) fitting "03 end cap", the end cover is separated from the main body; 6. Put the beginning of the movable wrench in the hexagonal position of the accessory "04 core fastening hexagonal sleeve", adjust the opening size of the movable wrench, rotate it counterclockwise, and remove the ceramic valve core for inspection. If intact, rotate clockwise (right) and tighten to stop the force; If damaged, replace the spool with a new one. 7. The original accessories "03 end cover is the first code", "02 water handle", "01 hot and cold mark (note that red represents the hot water side, blue represents the cold water side)".