The way to open the pen cap, what to do if the pen cap and pen tip are stuck

Pad two layers of napkins and rotate them with your teeth.

Hello, glad to answer for you. If the nib is stuck in the cap, you can wrap a paper towel or towel around the cap to reduce the smoothness. It is also possible to use the principle of heat expansion and cold contraction to unscrew the pen cap.

Or if you are a more expensive fountain pen, you can take it to a professional pen repairer for help. Tips, the pen cap is not easy to twist may be because the pen cap is used too strongly, it is recommended to close the pen cap gently. It is also possible that the ink has dried up and the nib is clean.

Summary. Hello dear, glad to answer for you! How do you get a fountain nib stuck in the cap? The best way to take out the nib of the pen is to drop the cap, it is recommended that you find an open spot, no dead corner, throw it into the ground, and the nib will be shaken out.

Hello dear, glad to answer for you! How do you get a fountain nib stuck in the cap? The best way to take out the nib of the pen is to drop the cap, it is recommended that you find an open spot, where you are not dead and have no luck knowing the slip corner, and throw it hard into the ground, and the nib will be shaken out.

Expansion: The fountain pen in a broad sense is a commonly used writing instrument, invented in the early 19th century and designed by the American Waltman. The nib is made of metal, which makes it sleek and elastic to write, and is quite smooth.

At the mouth of the pen cap or on the surface of the nib, there are obvious trademark brands and models. If it is also accompanied by the method of water absorption (inking), it is not divided into dipping fountain pens, tap fountain pens, and ink sac fountain pens. Pay attention to maintenance and cleaning when using.

Summary. Preparation materials: cotton, cloth fabric, tape, sewing thread, scissors, etc.

3.Copy the stencil onto cotton and cloth fabric, and use scissors to cut out two caps along the stencil. 4.

Place the two caps together with tape and sew the two caps together with a sewing thread. 5.Finally, a pen capsule is completed by placing the pen in the capsule.

The pro can be taken out completely using the following methods.

Preparation materials: cotton, cloth fabric, glue shiny leakage tape, sewing thread, scissors, etc. 2.

Copy the stencil onto cotton and cloth fabric, and use scissors to cut out two caps along the stencil. 4.Place the two caps together with tape and sew the two caps together with a sewing thread.

5.Finally, I put the pen in the cap cap, and a pen cap is completed.

It can also be bitten off using a simple and rough method, but it may run into the mouth and can be pulled off with pliers.

What should I do when I use a fountain pen to write, sometimes the cap or barrel of the fountain pen cannot be unscrewed?

The cap of the fountain pen cannot be unscrewed, usually for several reasons. One is that if you don't use it for a long time, the cap is stuck by the solidified pen water, so it can't be unscrewed.

In the case of low temperature in winter, cold shrinkage occurs, and the cap of the pen is too tight, so it cannot be unscrewed.

Then there is the wrong direction when installing, or too hard. Slippery hands and other reasons.

In such a situation, first try to wrap the pen in a towel, paper towel or other items to reduce the smoothness and twist it.

If you don't see the effect per mu, you can adopt the method of thermal expansion for nuclear slip resistance. Soak the fountain pen in warm water, pay attention to the temperature and time of the water, and avoid the deformation of the fountain pen caused by overheating.

You can also use candles, lighters and other flames to heat the steel wax pen from a distance. Do not concentrate on heating, but shake the pen or flame back and forth. Again, emphasize that point, and be careful to avoid deformation of the pen caused by overheating.