How do I take care of my M70 tires?

Tire inspection is mainly to check the tire pressure and whether there is wear and tear, and replace the tire as soon as possible before the tread wears to the wear line. If there is a small crack on the sidewall, you can't use it for long-distance or high-speed driving, because the tire sidewall is thin, and high-speed driving is prone to punctures.

Hello! Daily tire maintenance can start from the following aspects:

1.Check the air pressure of all tires when they are cooled at least once a month, including spare tires.

2.Do not exceed the reasonable speed required by driving conditions and legal restrictions (e.g., slow down or avoid obstacles such as rocks and potholes in front of you).

3.Regular wheel alignment and balancing is important to keep your driving safe and get the ideal mileage.

4.In order to achieve uniform wear and thus prolong the service life of the tires, the vehicle needs to adjust the tires at about 8,000 to 10,000 kilometers.

5.Protects tires from sunlight, oil, acids, and hydrocarbons.

6.Good driving habits need to be practiced, such as: avoid emergency braking, slamming the steering wheel, etc.

For more detailed tire maintenance information, you can log in.

to review.

1Check the tire pressure regularly. 2. Check the wear of the tires frequently. 3. Remove small stones and other foreign objects in the tires in time. Try to keep your tires as clean as possible. 4. Carry out four-wheel alignment at regular intervals.

Tires have their own speeds, loads, wear limits, and radial tire sidewalls are relatively fragile. In view of these, we should pay more attention to daily maintenance.

Method: 1. Check the tire pressure frequently, inflate the air-deflated tire in time, and keep the tire pressure consistent, otherwise it will cause rapid wear of the tire with low air pressure, increase driving resistance, and increase fuel consumption. It can also cause malfunctions such as misdirection.

It's best to buy a regular tire pressure gauge and measure it every 2 months, especially if you want to go out on the highway. The air pressure of the tires in summer should be slightly lower than in the winter to avoid punctures in the summer heat. Please check and adjust the tire pressure according to the tire pressure of the vehicle.

You can find the manufacturer's specified tire pressure in the vehicle's owner's manual, in the storage drawer next to the driver's seat, etc.

2. Avoid hitting obstacles, when the vehicle is driving at high speed, such as the tire hitting the pothole and other obstacles, it will cause the tire to produce serious extrusion deformation between the obstacle and the rim flange, which can cause the carcass cord cloth to break the yarn, and the air inside the tire will rise from the broken yarn to form a bulge. In severe cases, it can cause the sidewall of the tire to rupture and the tire to suddenly deflate.

3. It is very important to regularly do four-wheel alignment testing and dynamic balance experiments. According to the survey, the four-wheel alignment (such as: camber, forward tilt, toe-in, etc.) is not allowed to cause the phenomenon of tire eating. Seriously affect the service life of tires.

4. Frequently remove stones or foreign objects in the tread pattern grooves to avoid the deformation of the tire crown. Check whether there are scratches and punctures on the sidewall of the tire, whether the cord is exposed, and replace it in time if so.

5. Don't start too hard, try to use less sudden braking, and try to slow down the speed when driving in corners to slow down the wear and tear of tires.

6. The tire temperature is high when driving in summer, and the friction between the tire and the ground for a long time makes the tire temperature continue to rise, so it is best not to cool down with cold water, but to stop and rest, so that the temperature slowly drops.

7. Rotate regularly to prevent uneven wear of each tire caused by different loads on the front and rear wheels. For front-wheel drive vehicles fitted with four new tires of the same specification with no directional or asymmetrical tread, the first adjustment should be made at 10,000 km of tyre use.

First, check the tire pressure regularly according to seasonal changes; After driving to a certain extent, the front and rear office are replaced; Clean up foreign objects in the tire tread; If available, spray with protective oil or wax.

First of all, check the wear and tear of your tires regularly. Generally speaking, car tires can generally travel 5-100,000 kilometers, so it is necessary to check the wear of the tires regularly, and if the wear is serious, the tires need to be replaced.

Second, wash your tires frequently. If the tires are on a mud road, there will be a lot of mud, and there are too many impurities on the wheels, which will affect the safety of driving, so you also need to clean the tires when washing the car, otherwise the wheels will accelerate wear.

Then, you need to do a four-wheel alignment. Four-wheel alignment can improve the performance of tires and ensure the normal handling of the vehicle, while poor wheel alignment can lead to irregular tread wear and shorten tire life.

Next, check inflation regularly and stabilize tire pressure. The wheels bear the weight of the body, and the pressure of the four wheels needs to be consistent, otherwise the steering wheel will be unstable, so the inflation should be sufficient and the pressure should be stable.

The spare tire should be kept dry. The spare tire can be used when we have an accident, and it also needs good maintenance, if there is a lot of moisture, it will damage the tire.

How many kilometers have you run, I just attended Goodyear's class lecture in Beijing today... Wait for me to write a post about tires View original post".

M70 tires are made of high heat dissipation aluminum alloy wheels, which are easy to talk about with radial tires and lightweight aluminum alloy materials, which are not easy to burst at high speeds, which is conducive to improving strength and driving safer.

Clever "job rotation" to prevent eccentricity.

At present, most cars have a front-wheel drive engine, which makes the front wheels have a large load, and at the same time, they are also responsible for steering and other controls, resulting in serious wear and tear on the front wheels compared with the rear wheels. In addition, due to the different positioning angles of the front and rear axle suspensions, the wear degree and wear position of each tire are also different. In the long run, it will make the tire eccentric wear more serious, which not only reduces the service life of the tire, but also has great safety hazards.

Therefore, in order to prolong the service life of tires and eliminate potential safety hazards caused by eccentric wear, it is necessary to make the tires regularly change positions to "rotate", so as to ensure that each tire can achieve a balance of work intensity, and reasonable transposition can extend the service life of tires by 20%.

The spare tire does not have to expire and has to be "scrapped".

Tire rotation is not a casual change, this is also a science. According to industry insiders, please follow the tire adjustment recommendations of the automobile manufacturer in the "Vehicle Manual", if the manufacturer does not specify the specific tire adjustment period, usually the front-wheel drive vehicle should be transposed every 8000 kilometers, and the four-wheel drive vehicle needs to be transposed every 6000 kilometers. However, if there is no transposition for more than 20,000 kilometers, and the wear and tear of the tires has been formed, it is not recommended to transposition the tires to avoid deviation.

Generally speaking, front-wheel and rear-wheel drive vehicles are cross-positioned or directly reversed with the front and rear wheels.

In addition, if the specifications and structure of the spare tire are the same as the normal tires used on the car, the most scientific and reasonable method is to cross the transposition, even the spare tire is changed together, so that after a car runs 5 100,000 kilometers, the wear of the five tires is very uniform, and it can be replaced directly together, and the spare tire will not be wasted, because the tire also has a shelf life, generally about 5 years after leaving the factory, if the spare tire is not used for a long time, it will be wasted.

Do a dynamic balance test after the tire is rotated.

What should I pay attention to during and after tire rotation? Car tire transposition must pay attention to the "four same", that is, the same factory type of tires, size, pattern, specifications. That is to say, if the vehicle only replaces the individual tire type or pattern due to other factors such as puncture, and some owners use a spare tire with a slight change in size, then the tire can not be simply transposed, and only the factory type, size, pattern, and specifications can be changed in the case of the same, otherwise it will also cause deviation and other phenomena.

When changing the tires, it is necessary to pay attention to the tires that have been repaired due to air leakage as much as possible as a spare tire or install them on non-driving wheels, so as to ensure that the tires in the best condition are installed on the driving wheels to avoid the loss of direction caused by a puncture.

In addition, after the "rotation", it is best to do a dynamic balancing and four-wheel alignment. If the counterweight on both sides of the wheel hub is uneven, it can cause the vehicle to shake the steering wheel and unstable the body while driving. So usually, tire rotation and dynamic balancing are carried out at the same time.

Then the first rotation of the tires is very important, and don't forget to adjust the tire pressure after each rotation according to the recommendations of the vehicle manufacturer. (Car Maintenance).

1. Regularly check the wear and tear of tires, and replace them in time if they are found to be seriously worn.

2. Clean the tires frequently when cleaning the car body.

There are too many impurities on the wheels, which will affect the safety of driving, so you also need to clean the tires when washing the car, otherwise the wheels will accelerate wear.

3. Four-wheel alignment should be done regularly.

Poor wheel alignment can lead to irregular tread wear and shorten tire life, and wheel alignment can improve tire performance.

4. Check the inflation regularly and stabilize the tire pressure.

The wheels bear the weight of the body, and the pressure of the four wheels must be the same, otherwise there will be unstable driving, and there will be tire wear and safety hazards.

5. The driver has excellent skills and gentle driving.

From the perspective of car maintenance, the owner is required to drive carefully and be highly skilled. Avoid the rapid wear and tear of vehicle tires by collisions, sudden braking, sharp turns, slamming directions, etc.

In addition, the storage of the spare tire should be kept dry. Spare tires are used in the event of punctures, emergencies, and accidents, and they also need good maintenance to avoid damage to tires such as moisture and water accumulation.

Tire maintenance: 1. Frequently check the tire for scratches, bulges and clean up the inclusions in the tread and clean it as much as possible. 2. The air pressure of the tire should be checked frequently and supplemented, and the tire pressure should be increased in winter compared with summer.

There is a lot of knowledge about maintenance, pay more attention to the tire pressure, too high and too low will increase wear, there is also a risk of puncture, regularly deal with the debris in the tire pattern, when the tire pressure is too high in summer, do not use cold water to force the temperature to be lowered, etc., the landlord to Giti's official Weibo to take a look, the above tire maintenance knowledge is very comprehensive, can help you learn better.

No maintenance, just don't touch chemicals!

Usually before driving can visually check whether the tire pressure is normal, whether there is a bulge, cracks, foreign bodies, etc., at least once a month to the tire shop to check the tire pressure, when washing the car try not to let the car wash shop with the so-called tire oil brush the outside of the tire, the oil is easy to cause tire rubber hardening, and easy to produce cracks, if you feel that the direction has a serious bias when driving, you should immediately check whether there is a lack of air, when encountering potholes or speed reduction belts, it is best to slow down through or flash the potholes, This can also avoid damage to the shock absorption of tires and rims, the above is a personal opinion, I hope to help you with all the problems.