VISTA Wi Fi is limited and has been clicked on Auto Fetch

You change your IP to your father's (gateway, DNS, etc. should also be set to the same), tell your father's Ben to rest for a while, see if you can connect successfully, if it is successful, then you change the last digit of the IP to be non-0,1,255 to try. If it doesn't work, then you can change your dad's IP, and if he can't connect, I guess you're really embarrassed, and it may be that the MAC is bound. If your dad's kerosene fixed IP then the problem can only be in your place, disable the connection and then enable it, plus the connection diagnosis that comes with Windows, it should be able to solve.

In the local connection attribute on the Vista system, remove the pre-IPv6 checkmark. Apply and see.

IPv4 address:,Subnet mask:,Gateway:Also set. If you get: In Start-Run, type ipconfig all and fill in the DNS address that is displayed.

Do you have a password for your home network?

My computer is the same as Toshiba's, and the network at home has no password, and Vista can't be connected.

And the other XP will do.

It's okay to have a password outside.

In this case, set a password to see, hehe.

Restart the router, modem, and computer. It should be an issue with the router.

Open the 360 network first aid kit, as long as it is not a hardware and unlimited problem, it can be solved.

Now the problem should be that you can go to QQ but not to the web page, set DNS, 114, 114, 114, 114, 114, 114, 114, 114, 114, 115. The submask is generally 255,255,255,0

It should be a matter of settings, if the router has set up a submask and DNS, you can directly set it to automatically get it.

I've been in this situation as well, but I've just reconfigured the router.

In the process of using a wireless network, sometimes the wireless network connection is limited or there is no connection prompt.

This situation can be carried out in four ways.

Check and restore your Wi-Fi connection. The four aspects include: First, check whether the configuration of the wireless network card is the same.

The configuration of the front-end router is the same. Second, check whether the DHCP server of the router is shut down. Third, whether it is connected to its own wireless signal. Fourth, check whether the IP address has been allocated.

Restart your phone and computer or your computer is gone.

In this case, it may not be connected, and the wireless icon you see is full, but there is an exclamation mark.

In fact, if you open the wireless network card and look at the IP address of the network card, it is very likely to be 169**In this way, this is actually a wireless connection failure, and Windows automatically configures an address for the network card, so the network is not actually connected.

There are many specific reasons why it can't be connected. If you use it often, but you can't connect it suddenly, then try to reconnect it repeatedly, and if it doesn't work, restart the router, and then restart the computer. If this problem often occurs, it is recommended to reinstall the wireless network card driver.

I've also encountered such a problem.,Win7 system,Often can't connect,After reinstalling the network card driver,It's much better.。 I can't say why. ）

The reason for network restriction is mostly due to setting reasons or problems with the broadband account, and the specific solutions are as follows:

1.Right-click "Computer" on the desktop, and then select "Properties";

2.Go to the Network and Sharing Center and click on the name of the connected wifi;

3.Click on "Wireless Properties";

4.Click on the "Security" option, then click on the "Advanced Button";

5.Tick "Enable Federal Information Processing Standard (FIPS) compatibility for this network", then click "OK", disconnect the laptop wifi network, and then turn it back on and it should be able to connect normally.

Generally, it is obtained automatically, and it is recommended to check the router settings ......

Check if DHCP is turned on in your router, and if you're using wireless, it seems that there should be something else that needs to be configured.

Automatically get the IP will prompt Restricted or no connection, no impact, don't worry!

You can check how other people's IPs are set up! Imitate the setting!

Your office's internet access strategy is most likely limited!! For example, the NMS can only be connected to the intranet.

Common problems.

First of all, you must also get the IP automatically, not manually.

In is the route distribution busy, close a break, in the open OK, if there is any problem to find me.

There is a problem with your location, as well as the wireless network card.

Then check the gateway, DNS settings.

Solution 1: Restart the router.

Method 1: The router power cord is powered off and plugged in.

Method 2: 1. Open the browser - enter the general router address is this or check the login information on the back of the router) Enter the route - enter the user name and password, (the default is generally admin).

2. Click: System Tools Restart the router.

Solution 2: Reset the router and set dial-up again.

Reset Router Method:

Method 1: There is a button [RESET] button on the back of the router, press and hold for 5 seconds, and the indicator light on the router panel will be off and then on, which means that the settings have been reset.

Set up router dialing:

The IP and DNS settings of the computer are automatically obtained.

1. Open the browser - enter the general router address is this or view the login information on the back of the router) Enter the route - enter the user name and password, (the default is generally admin).

2. In the [Setup Wizard], select [PPPoe Dialing] (some are ADSL Dialing), enter your Internet username and password according to the prompts, and save.

3. In [Network Parameters] --WAN Settings], select [Normal Mode], and select [PPPoe Dialing] in the three options of [Connection]. The next step is to select [Auto Connect], Save, and Exit.

4. If you want to use wireless wifi, your router must have a wireless routing function, in the settings, turn on the wireless routing function, here, the wireless signal signal is changed to one of them. The strongest anti-interference.

You can also set a password for your Wi-Fi connection.

What should I do if my network connection is restricted?

The IP is restricted, is it the router set. If you don't let your Mac pass, you can set the IP to try it out by yourself. Then there are a few wireless connections. Probably only opened three. Then click on the installation in your network connection and install the protocol. /

First of all, ping what is your unlimited network card address, to see if it is in the same network segment (with the other three laptops) IP restriction should be the automatic IP you set, you can specify to try.

vista？You reinstall the system to install this? I think you'd better install XP or Win7. Vista is a perfect example of Microsoft's development failure.

First, remove the router's wireless encryption. If you can connect wirelessly, reset the wireless encryption.

Either you have to reinstall the driver of the wireless network card.