Which brand of ceramic tile is more wear resistant? What tile is more wear resistant?

Smick's tiles are hard-wearing. Its surface is smooth but does not need to be polished, so there is no problem of polishing porosity. Smic it is fired at high temperatures and is a strengthened polished tile with a harder and more wear-resistant texture than polished tiles.

The following points can be paid attention to when choosing the floor: 1. It should be purchased in regular companies and their subordinate stores, shopping mall showrooms and building materials supermarkets. Regular company in the service ***.

Do not be greedy for small and cheap, and buy from the so-called brick-moving vendors, so as to avoid construction and maintenance and other service problems, and endless troubles. Ask the other party to issue an official invoice. 2. For imported products, the supplier should provide the latest customs declaration form to ensure that the products are pure imports.

In addition, according to the relevant national laws and regulations, imported products should provide quality inspection reports from relevant domestic authorities to ensure product quality. 3. It is necessary to choose the best product performance, that is, the same quality ratio and the same quality performance.

Common floor tiles are: vitrified tiles, polished tiles, matte tiles, glazed tiles, printed tiles, non-slip tiles, special acid-proof floor tiles The identification of the quality of floor tiles is very professional, remind you to pay attention: First, to check whether the color of the tile is pure.

This trick is very simple, mainly to observe whether the color of the back of the tile is uniform and consistent. Good quality ceramic tiles, green body color system.

1. Symmetry.

SMIC's vitrified tiles are very wear-resistant.

Wear-resistant brick refers to a kind of ceramic tile with very high hardness and less water absorption, as long as you look at the physical parameters of the tile marked on the outer packaging of the tile, you can know whether this brick is wear-resistant brick, like vitrified brick, polished brick, etc.

1 Rub the tile glaze.

Rub the surface with two tiles of the same material, if there are grinding pits or scratches on the surface, wait for a few minutes, wipe with a rag, if the scratches do not disappear, it means that the wear resistance of the tiles is poor; On the contrary, it means that the wear resistance of the tile is better.

2 Machine-tested.

If you can use it to measure the wear resistance of tiles when you buy tiles, you can use it to measure the wear resistance of tiles. First, the ceramic tile sample is perpendicular to the base of the fixture and tangent to the steel wheel of the testing machine, and the steel wheel rotates at a certain speed to evenly add the abrasive; When the drum speed reaches 150 rpm, abrasive material is added and the pit chord length on the surface of the tile sample is measured.

I hope it can help you, and if you still have questions, click on the avatar and wait for you to tease

At present, the ceramic tiles on the market generally have a hardness of 4-5 on the Mohs scale, and the wear resistance is average. Kamia's jade porcelain brick hardness is more than 6 levels, wear-resistant and scratch-resistant, whether it is used at home or in a large number of engineering sites.

The wear-resistant performance of the glazed tile is relatively good, the glazed tile is different from the ordinary polished tile, the glaze on the surface is a special crystal wear-resistant glaze, the molecule is completely sealed after high temperature sintering, there is almost no gap, and it can be durable for a long time to keep the highlight not dim, hard and wear-resistant, and the tile will become brighter. The wear coefficient of ceramic tiles has a rotation and so on.

The determination of the wear resistance of brick glaze is a method to evaluate the wear resistance of ceramic bricks by placing grinding medium (steel ball and rubicon) on the glaze surface and rotating it, and observing and comparing the worn samples with the unworn samples. To reach more than 12,000 rpm.

Polished brick is a product obtained by grinding and polishing process on the surface of porcelain tile, the surface is smooth and has a certain gloss, and glazed brick is a new category developed in recent years, the process is to glaze and print on the surface of the body, and then pour a layer of transparent glaze, and then fire the product obtained by kneading and polishing process, and the surface also has a certain gloss. The difference between the two is that the hardness and wear resistance of the polished brick are higher, and the pattern of the glazed brick is rich in color and the texture is better.

Wear-resistant tiles can choose polished tiles or full-body tiles, which can basically meet the needs of households.

Decoration Da Cui explained the classification of wear-resistant tiles, hoping to help you in decoration.

The wear-resistant is the full polished glaze, again the polishing, and then the microcrystalline. In fact, it is very simple to look at the wear-resistant, take the remaining material of a tile, use the corner of the remaining material to scratch the smooth surface of the brick, look at the scratches can be wiped off, generally the full glaze is OK, the polishing will not be obvious, the microcrystalline will be obvious, so it is recommended to buy the full glaze, polishing, but you can't buy microcrystalline, if you want to use microcrystalline, you can only put it on the wall.

There are many brands of ceramic tiles with good wear resistance, and here are some of the brands that have a good reputation in the market:

1.Marco Polo: Marco Polo is one of the well-known ceramic tile brands in China, and its products are known for their reliable quality, good wear resistance, rich colors, and novel shapes.

2.Dongpeng: Dongpeng is one of the largest ceramic tile manufacturers in China, and its products have a high reputation and reputation in the domestic and foreign markets.

3.Great Wall (greatest wall): Great Wall is one of the leading brands in China's ceramic tile industry, and its products are favored by consumers for their good wear resistance, anti-slip and corrosion resistance.

4.Nobel: Nobel is an internationally renowned ceramic tile brand, and its products are known for their high quality, durability and wear-resistant.

5.Modena: Modern is a professional enterprise engaged in the production of high-end ceramic tiles, and its products have attracted wide attention for their unique design, exquisite craftsmanship and good wear resistance.

It should be noted that the first brand of ceramic tiles in different products are different in terms of quality, design, function, etc., and consumers should choose the right product according to their needs and budget when purchasing.

When choosing floor tiles, there should be a difference in the material. Floor tiles are divided into two kinds: polished tiles and glazed tiles, polished tiles are also called vitrified tiles, which are characterized by good wear resistance, no need to soak in water, etc., because they are relatively smooth and beautiful, so they are better to use in the living room and dining room, and they are relatively easy to wipe. Glazed bricks are also called mirror bricks, which are characterized by good anti-slip performance, and the more water encounters, the better the anti-slip effect, but it should be noted that glazed bricks are more sensitive to dust, resulting in weakened anti-slip effect, and it is best to use glazed tiles in kitchens and bathrooms because they are easy to get wet.

Tile hardness is the most important parameter, which will directly affect the service life of the tile, which is particularly important. The easiest way is to use the method of tapping to listen to the sound, the sound is crisp and indicates the inner ***, which is not easy to deform and break; Color difference, size according to the intuitive judgment can be, to see whether the color of a batch of tiles is roughly the same, can be better put together, small color difference, regular size is the top grade.

Another important parameter is the wear resistance, which is divided into five degrees from low to high, and the five degrees belong to the super wear resistance, which is generally not used for home decoration, and the home decoration bricks can be selected between one degree and four degrees. The water absorption rate also determines the use of ceramic tiles, the density of tiles with high water absorption rate is low, the brick holes are loose, and they should not be used in places with frequent activities, so as not to clean up after water absorption and fouling; Tiles with low water absorption have high density and high moisture and stain resistance.

The wear coefficient of Oushennuo glazed brick is 4 5 grades, and it is no problem to scratch on the ground with a knife, and it is even more okay for daily use! However, it should be reminded that the sand used in the decoration site is generally quartz sand, and the hardness can reach 7, so if the site is not properly protected, it is easy to cause scratches.

Each brand has its own product characteristics, so it is recommended to compare and take a look. On the one hand, the selection of ceramic tiles depends on the quality, and on the other hand, the product is seen. Now there are other well-known brands in the market, such as:

Ou Shennuo, Jane Yi and so on. It is recommended to go to the physical store to compare the real thing, and hope that you can choose the right product for yourself.

Generally, the wear resistance level of tiles is divided into 5 grades.

Level 1: It is the lowest level of wear resistance, which is generally used for display, walls, or places with few people;

Grade 2: The hardness of this level is greater than that of the first level of tiles, and it is used in bathrooms, bedrooms and other places where there is no hardness friction;

Level 3: Mainly in places with a large flow of people, such as living rooms, kitchens, etc.;

Grade 4: It is a ceramic tile with relatively high wear-resistant height, which is suitable for use in halls, corridors and public places.

Grade 5: There is no clear concept of the division of grade 5 hardness, but theoretically it has super wear resistance, has super wear resistance, and is generally used in non-household environments such as shopping malls, airports, and stations.

The above is only relative to the family, the project has a professional Mohs hardness grade standard) can refer to the national industry manufacturing specifications.