Can you drink water from Huangming s water heater?

Do not drink the first installed solar energy, because during installation, the installer will use dish soap to lubricate the vacuum tube of the solar energy.

The water in solar energy that has been used for more than half a year can be drunk

The water in the solar water heater is recommended not to be consumed. The inner tank of the solar water heater tank is food-grade SUS304 stainless steel, and the seals on the inner tank of the water tank are all silica gel, which is non-toxic and tasteless, and has no impact on water quality, but the water in the vacuum tube of the water heater cannot be completely released every day, and it will deteriorate after a long time, while the water in the solar water heater is circulating water, and the new water is mixed with old water, so that the water released is not fresh. It's the same reason that we don't drink the water in the thermos for a few days, so it is recommended that you do not consume solar water.

You can also log in to Huangming Climate Improvement**(

Consult our official customer service staff or call Huangming Solar National Unified After-sales Service**400-808-2222I wish you a happy life, you can ask any questions at any time, and I will answer them for you in a timely manner.

It should never be drunk because the heat-gathering part of the solar energy has chemicals that are harmful to the human body.

I can't drink it, and it's said that the vacuum tube is the same as the kettle liner, but it's not the same after all.

Don't drink anything that comes into contact with chemicals and can't get into the stomach as much as possible.

Summary. 1. If you don't use Huangming solar water heater for a long time, you can remove the collector tube, if the user is troublesome to unload the collector tube, you can use the color light tile to cover the collector tube. The air temperature of solar energy will be very high, and even if it is not used for a long time, it will not affect the quality of the vacuum tube.

2. If you do not use the solar water heater for a long time, you need to empty the water in the water tank and the pipeline to prevent the water tank and pipe from freezing when the temperature is low in winter. Close the inlet valve first, then open the sewage outlet and outlet valve under the water tank, and then close the sewage outlet and outlet valve after the water is emptied, and never open the inlet valve.

3. The user must cut off the power line of the controller, and take out the sensor placed in the solar water tank and keep it properly. Before using the solar water heater again, it is necessary to check whether the parts of the water heater are in good condition.

Huangming water heater is no longer in use, what do I need to do?

1. If you don't use Huangming solar water heater for a long time, you can remove the collector tube, if the user is troublesome to unload the collector tube, you can use the color light tile to cover the collector tube. The air temperature of solar energy will be very high, and even if it is not used for a long time, it will not affect the quality of the vacuum tube. 2. If you do not use the solar water heater for a long time, you need to empty the water in the water tank and the pipeline to prevent the water tank and pipe from freezing when the temperature is low in winter.

Close the inlet valve first, then open the sewage outlet and outlet valve under the water tank, and then close the sewage outlet and outlet valve after the water is emptied, and never open the inlet valve. 3. The user must cut off the power line of the controller, and take out the sensor placed in the solar water tank and keep it properly. Before using the solar water heater again, it is necessary to check whether the parts of the water heater are in good condition.

If you don't use the Huangming solar water heater for a long time, when you use the water again, you must remember to use the water when there is no sun. The best time to water is before sunrise or two hours after sunset, if you water the solar energy at high temperatures, it will cause the pipe to blow up due to the temperature difference. If you do not use the Huangming solar water heater for a long time, you must do a good job of maintenance so that it will not fail during the next use.

Because there is no hot water, I don't plan to use it, and I don't want to go to the top floor to deal with it, so I can put the water heater on the top floor after all the water is released.

If you don't use the Huangming solar water heater for a long time, when you use the water again, you must remember to use the water when there is no sun. The best time to water is before sunrise or two hours after sunset, if you water the solar energy at high temperatures, it will cause the pipe to blow up due to the temperature difference. If you do not use the Huangming solar water heater for a long time, you must do a good job of maintenance so that it will not fail during the next use.

Because there is no hot water, I don't plan to use it, and I don't want to go to the top floor to deal with it, so I can put the water heater on the top floor after all the water is released.

If you don't use the Huangming solar water heater for a long time, when you use the water again, you must remember to use the water when there is no sun. The best time to water is before sunrise or two hours after sunset, if you water the solar energy at high temperatures, it will cause the pipe to blow up due to the temperature difference. If you do not use the Huangming solar water heater for a long time, you must do a good job of maintenance so that it will not fail during the next use.

Sample: Do you think I don't know you if you wear a vest?

It's not the same yet, advertise it.

This emperor is talking about drinking grade, which means that all aspects of its design are made in accordance with the standards of drinking water, but we have to think that the water we use solar energy to hit is generally tap water, and you must ensure that the water is also drinking grade, at least there are no impurities. Also, solar boiling water is not like we usually boil water, if there are no special circumstances, the water is heated for a long time in it, or even boiled for a long time, we all know that water boiled for a long time, it will produce some toxic substances, although the harm to the human body is not great, but it is always negative.

There is also Wu Qiju, after using it for a long time, especially in the case of general water quality, it is easy to produce scale, and the cavity of the water can flow down a little from time to time, which will also affect drinking.

Therefore, in general, this water is not recommended to be drunk, but if you buy a new solar energy and the water quality is very good, it is no problem for you to release it and drink it as soon as the water is turned on in the summer.

Hello, Manual water on.

Click the "water supply" button to start the water supply, reach the upper limit water level to stop the water supply, click the "water supply" button during the water supply, the system will stop the water supply (Note: When the water tank is empty and the temperature in the water tank is higher than 90, in order to prevent the pipe from exploding, the system will not be watered.) ）

Automatic water filling. When the water level is lower than the lower limit water level set by the user, the buzzer will beep twice, and the water will be automatically loaded after 5 minutes, and the water will be automatically stopped after 15 seconds when the upper limit water level is reached.

Get on the water at regular intervals. The user can freely set the water supply time of the solar water heater according to his needs, and can set the regular water supply twice a day, in the timing water supply state, after reaching the timed water supply time, the system will automatically water supply, and stop the water supply when the set upper limit water level is reached, click the "reservation" button to cycle to switch the setting state of the timing water supply 1 and the timing water supply 2, and the timing water supply time setting method is as follows: click the reservation button once, "Timing Landscape 1" flashes and displays, and the timing time is displayed as the current set time of "Timing Water Supply 1", Tap the setting button to display the hour portion of the set time of "Timer Water Loading 1", and click the up and down buttons to set their values. When the timer time is set to —:

When the water supply is in the state, the scheduled water supply is in the canceled state.

At the same time, you can set the time of the timer to water 2.

Temperature-controlled hydration. When the sunlight is sufficient and the water temperature of the water heater is high, the user can start the temperature control water replenishment function, in the state of the temperature control water replenishment function, when the water temperature in the water tank is higher than 60 degrees, the system will automatically water supply, and when the water tank is full or the water temperature is lower than 55 degrees, the water supply will be automatically stopped (Note: In the process of automatic water supply for temperature control water replenishment, manually click the "water supply" button to stop water supply, from 17:30 pm to 9:0 am the next day

00, the temperature control hydration function does not start (the temperature control hydration time is 9:00-17:30) (press and hold the water button for five seconds, the buzzer will chirp twice, start the temperature control hydration function, press and hold this button again for five seconds, the buzzer will chirp three times, and turn off the temperature control hydration function.)

Check room temperature. Tap the "Room Temperature" button to display the room temperature, tap the "Room Temperature" button again to display the water temperature, if you tap the "Room Temperature" button once, the display will display the room temperature, and it will automatically switch to the water temperature display after a delay of 30 seconds.

If the operation according to the manual to turn on the temperature control hydration function can not solve your problem, it is recommended that you log in to the official ** of Huangming to immediately consult customer service to repair and solve your problem.

If you have any questions, please feel free to ask questions to the Huangming Enterprise Platform, and I will answer them for you in a timely manner.

This is a problem with the thermostat inside and needs to be replaced by a professional. It is generally 73 degrees.

Huangming water heater not hot water can be caused by a variety of reasons. Sometimes it can be a simple problem, such as a water valve not fully open, or a faulty electrical circuit. However, more complex issues may require more advanced skills and tools to check and fix.

Here I will give you some ways to solve the common problem of Huangming water heater not hot water:

1.Check whether the power supply is normal.

First of all, you need to check if the electrical plug is plugged in properly and if there is electricity. At the same time, you also need to check if the power switch of the water heater is turned on. If everything is normal, you can unplug the power supply and check that the water heater's electrical outlet is good.

If the socket is broken or the wires are loose, it needs to be repaired or replaced promptly.

2.Check if the thermostat is normal.

The thermostat is an important part of controlling the water temperature, and if it fails, it may cause the water heater to not run hot water. To check if the thermostat is working properly, you can rotate the thermostat to its maximum position, wait a moment, and then check the drain. If the water flow is very hot, the thermostat may be faulty and needs to be replaced promptly.

3.Check to see if the heating tube is damaged.

The heating pipe is a critical component that heats the water, and if it is damaged or burned out, it will cause the water heater to not have hot water. In order to inspect the heating tube for damage, you will need to disassemble the water heater and inspect the connections of the heating tube for cracks, burns, scaling, or other issues. If the heating tube is damaged, it needs to be replaced in time.

4.Wash the filter or nozzle.

Nozzles and filters are key components of water heaters, and if the fruit is contaminated during use, it will cause the water heater to not have hot water. In order to clean the nozzle or filter, you need to turn off the heater, remove the fazzle and remove the nozzle or filter. Soak them in warm water, rough edges and wipe them clean using a soft brush or sponge.

After cleaning, reinstall it.

Overall, if you find that your Huangming water heater is not hot, don't panic, first understand the cause of the problem, and then repair it accordingly. If you are unsure or do not know how to repair it, contact a professional technician.