How to explain the fading of outdoor plastic to customers?

Hello, if the outdoor plastic fades, you need to know the reason for the fading before you can explain it to the customer, usually you can tell the customer the reason for the high temperature, yes, I hope to help you!

The first thing to do is to improve the quality of your plastic products, which can fade due to a variety of factors. The fading of plastic coloring products is related to the lightfastness, oxidation resistance, heat resistance, acid and alkali resistance of pigments and dyes, as well as the characteristics of the resin used. The quality has gone up, so naturally there is no need to explain it to the customer.

In the case of fading, be sure to explain to the customer, for example, this material may be a little problematic, I need to help you replace it, or there is a little problem with this quantity, you need to admit the mistake.

The outdoor plastic faded to explain to the customer, that is, because of the temperature. and time. It is normal for factors to cause the aging and fading of plastics.

How to explain the fading of outdoor plastic to customers?

This means that you say that this is a normal phenomenon, that it belongs to natural fading.

If you want to better explain the fading of outdoor plastic to customers, you must effectively explain the main reasons for fading and the main circumstances that cause it, so as to be more scientific.

How to explain the fading of outdoor plastic to customers? If the customer can understand it, that's it, if you don't understand, you can replace it with a new one.

How to explain the fading of plastic to customers? The plastic is definitely going to fade on the outside. He should understand.

Plastic will fade when exposed to the sun, it will produce a chemical reaction, fade, you can explain this to the customer.

The outdoor plastic fades, this is because of the quality problem, but the brother explained to the customer that there must be compensation.

Outdoor plastics should fade after being exposed to direct sunlight for a long time.

Specifically, if you have a problem with the quality of this product, you should follow. The customer reasonably explained and apologized.

How to explain to customers that outdoor plastic fading is a normal chemical reaction?

The trail is fitness, and they are all citizens who are not professional in sports, so it is recommended that they must be plastic, otherwise there will be accidental injuries, and there are many similar lawsuits filed by citizens.

1. The permeable concrete site is a hard site, and the plastic site is a flexible site. Exercising on an elastic field has a high degree of comfort and reduces the damage to human joints caused by exercise.

2. Exercise on the hard field, easy to cause fall and abrasion damage, plastic field can buffer the human body, now the state requires that in the fitness equipment and children's activity area, plastic or elastic pads need to be laid for protection.

3. Permeable concrete site is easy to cause threshing, and there are pits and particles on the site, especially for children's roller skating, there will be a risk of falling injuries, and the service life is short.

4. Plastic sites and trails can be more integrated with landscape green space, with a minimum service life of more than ten years, so as to enhance the overall effect of the park and the people-oriented design concept.

The two materials are similar and the construction period is similar, but the effect is very different, so the General Administration of Sports, the Sports Association and relevant departments recommend that in order to achieve the fitness effect and safety of the public, it is best to use plastic.

If you use PC, you need to add UV agent, generally add high and clever thousandths of the bucket with five can be used for 3 to 5 years, if you feel that it is not enough, you can add to 10 thousandths, but you can not add more, you can choose to use low flow high molecular weight PC, the impact strength will be high, if you feel that it is not enough, you can do UV coating treatment on the surface of PC, if you need to increase the impact strength, you can add glass fiber or carbon fiber.

The material supplier reminds you that the surface of the PP plastic shell can be treated with anti-UV treatment for long-term outdoor use.

The reason why the outdoor plastic floor is yellow is estimated to be a cause of wind and rain, and it will turn yellow when there is too much water.

The reason why this kind of ground is placed is because the air has been oxidized for too long.

If the outdoor plastic floor is yellow, it is normal for the cause of sun exposure.

I think the reason for the yellowing of the outdoor plastic floor is affected by the water quality, and it can be removed.

The yellowing of the outdoor plastic floor is caused by oxidation. I don't know what else is going on.

The reason for the praise should be that the sun shines for too long or that some maintenance has not been carried out.

The reason is probably that it was exposed to the sun, and then it produced a certain amount of yellowing.

The indoor plastic floor is yellow, probably because of the sun exposure!

The reason for the yellowing of the outdoor rubber floor is the exposure to sunlight. A chemical reaction took place.

The reason for the yellowing of outdoor plastic floors should generally be plastic quality problems.

The reason for the yellowing of outdoor plastic flooring must be the aging of sunlight and sunlight.

It should be the precipitation of stolen goods, so it causes the plastic floor to turn yellow.

This should be done after long-term exposure to the sun.

Plastic flooring may be caused by rust or aging.

What is the reason for the yellowing of 100,000 plastic floors? I think the yellowing may be moldy.

The yellowing of outdoor plastic floors is caused by long-term sunlight exposure to the aging of plastics.

It rains a lot, and it is not cleaned up in time, leaving marks for a long time.

It is possible that this one itself will be yellowed after using it for a period of time, and there is also a possibility that it is stained.

The reason for the outdoor plastic floor rice bowl should be based on the water discharge, due to.

What causes yellowing of outdoor plastic wraps? Perhaps a demonstration mode of solar radiation plugs.

ASA is the most practical for outdoor products, ASA is resistant to aging and UV rays.

Plastics can be modified to meet your requirements.

Now WPC materials can also meet your requirements.

It is estimated that the UV you add is a bit of a problem, and generally the UV varnish we spray has a durability of more than half a year.

Do anti-aging treatment. Put something in it when you pull the material.

1.In order to improve the strength, we must first use a little better PE material, as well as the coupling agent of wood powder and plastic. In addition to raw material control and formulation, granulation and extrusion processes must be standardized, and extrusion speed and strength are also closely related.

Secondly, the WPC profile is also very particular about the installation, try not to fix it with nails or screws, so that the WPC material has a reasonable expansion and contraction space, and the installation effect will be very good with buckles.

2.Color degradation issues. First of all, it is necessary to choose inorganic pigments with good tinting strength, such as iron oxide red yellow, titanium oxide, ultramarine, carbon black, etc.

Secondly, the pigment should be added to the color saturation to achieve the color concentration. If the color density is not reached, the color of the newly produced product can be achieved, but it will fade after a period of time. The saturation of colors is a problem for pigment engineers with specific practical experience.

The cost is low, and there are so many requirements, and the requirements are so high, what about sleepwalking!!

How much strength is required? How long is the anti-aging requirement?