0x76385941 directive to apply the 0x02602168 memory, which cannot be read, to terminate the program,

Memory can't be"read"or"written"Most of this phenomenon is caused by a conflict between a newly installed software and other software or other hardware, or a hardware failure or damage, and in general, the compatibility of software and hardware is more likely to be caused. It is commonly found in some low-end motherboard configurations. There are a large number of so-called solutions to this problem on the Internet, but almost none of them are actually effective.

Solving this problem is not as simple as you think!

The following methods are carried out under the premise that the system is clean and virus-free, if you are not sure whether the system has viruses, please delete the previous anti-virus software, go to the Sky Software Park on **Kaba 2009 full-featured security software upgrade to kill the virus in the clean system, and then **360 Guardian to patch the whole system.

You can try the following methods first, but relying on this method to solve this kind of failure, it is too pitiful, and it can only be said that you can try it.

Start-run-cmd-input: for %1 in (%windir% system32*.dll) do s %1, and then try to start-run-cmd-input:

for %1 in (%windir%\system32\*.ocx) do regsvr32 /s %1

Please carefully recall whether you have installed any software before this problem occurs, and if so, please delete it and try again, because software bugs can also occur and often cannot be solved. If the program you want to execute has this failure, you can reinstall the program and try it, and if there is a newer version, try the new version. If you turn off IE or turn on IE, you can try to upgrade the IE version.

If it was IE6 before, you can upgrade to IE7 and try it, and if it was IE7 before, you can try to upgrade to IE8You can also try out third-party browsers, such as Maxthon.

If that doesn't work, you can only reinstall the operating system. Please install a different version of the operating system, the different versions here refer to the previous installation of Tomato Garden, now replaced by Rainforest Wood Wind, used to use SP2, now use SP3.

If you still have problems after reinstalling the operating system, think carefully about whether there is any hardware that has been replaced or repaired, and if so, find a way to replace it and then test it.

If that doesn't work, check the hardware using the swap method, where the memory is the most likely to fail, please check the memory first.

Program compatibility issues or virus interference.

"The memory cannot be read as the cause of the application error.

1.Caused by virus Trojans, in today's Internet era, viruses often sit in order to get more profits, often virus kidnapping applications and system files, and then some security antivirus software will be infected by virus Trojans applications and system files as viruses kill the application error.

2.The application components are missing, and the complete operation of the application requires some system files or some LL files to support, and if the application components are incomplete, the application will also cause application errors.

The application is abnormal caused by the bug of the application itself, no one is perfect, and the program is the same, the programmer can only try to make the bug appear as little as possible, and solve a bug when there is one.

3.The application software is incompatible with the operating system or other application software, causing the application to be abnormal.

4.Problems with the operating system itself, bugs in the operating system itself, can also cause crashes with application errors that the memory cannot be read.

5.Computer hardware compatibility can also be caused, as well as poor heat dissipation, overclocking, etc.

The memory cannot be read for the application error workaround.

First rule out whether it is caused by a virus Trojan, please use Kingsoft Guardian to check and kill Trojans, and enter the main interface to enter [Trojan].

Then click [Quick Scan].

2.Use Kingsoft Guardian to fix vulnerabilities and solve application abnormalities caused by the system itself.

Enter the main interface and enter [Bug Fix].

Then click [Fix Now].

3.If the application error is caused by a single application, try reinstalling the software and reinstalling it. If it still doesn't work, close other software to see if it solves the problem.

4.If the above methods still can't solve the problem, then it can be caused by hardware problems, then check the memory module, motherboard, heatsink and so on. It is recommended to find a professional hardware repairer to solve this problem, and it is not recommended that you solve it manually. "

If the system is not toxic, it may be that the heat dissipation of the power supply, CPU, memory, graphics card, and motherboard is not good.

Use an eraser to erase the gold finger of the memory module and graphics card, and replace it if it doesn't work. Clean the motherboard and plug and unplug parts.

It is recommended to change the fan and power supply.