-
1.You don't need to reinstall the system, just use the software.
2.The new hard drive cannot boot the system until it is partitioned and formatted. We can boot the system through a bootable disc such as the Win98 Me boot disc or a floppy disk with a boot function.
If your system does not yet support this boot method, you will need to go to the BIOS setup procedure and change the First Boot Device to "ATAPI CD-ROM Drive" or "Floppy Devices".
After using the fdisk command to partition the system with a disc or floppy disk, enter the dos state, run the "fdisk" command, and a large English prompt message will appear on the screen, the last line of "do you wish to enable large disksupport (y n)?".Ask the user if they want to use the large hard drive mode, here they need to type "y", otherwise they will not be able to create a hard drive partition with more than 2GB capacity. After running fdisk, you will be asked if you want to use the large hard drive mode, in which case you must select "Y", otherwise you will not be able to create a hard drive larger than 2GB.
Create a primary DOS partition.
Next, enter the main interface of fdisk, there are four options here, the specific meaning is as follows:
create dos partition or logical dos drive: Create a DoS partition or logical dos drive.
Set Active Partition: Set the active partition.
Delete Partition or Logical Dos Drive: Deletes a partition or logical drive.
display partition information: displays the partition information.
-
It is not recommended to change the capacity of the C drive, and the arrangement of the hard disk partition during the installation of the computer city is very reasonable. The C drive does not need to be too large, please install the software game on a different disk.
It is very important to note that most C disks use the FAT32 file system, which is prone to hard disk fragmentation, and the more files there are, the more fragments. It is inefficient to make the system run at the top of the head.
Changing partitions runs the risk of data loss.
Software includes partitionmagic, etc. It cannot be operated in Windows. You can buy a pirated version of the system disk, usually with partition management software
-
Optimizer, clean up the hard drive junk frequently.
**Stations to be emptied!
-
It's not easy to make,In fact, the C disk doesn't have to be too big,The key is to don't install software in the C disk,Don't put anything else,There is also a regular removal of system garbage,If you have to make the C disk larger, reinstall the system,Redivide the partition。
-
It is easy to use the hard disk partitioning tool to re-divide the size of each hard disk without formatting.
-
Go here for the next software.
You can partition the size directly
Good luck
-
From the new partition, if you want to divide from the new division, there is nothing in it! It's best to put it on a portable hard drive!
The impact is great, the system will run slower, and there may be a crash or boot into the system, it is recommended: clean up the C disk, move the "My Documents" to other partitions, move the system page files to other partitions, delete temporary files and other operations, if your SSD is divided into several areas, if it is a Win7 or above system, it is also recommended to compress the D disk, expand the C disk operation, if it is WinXP, of course, you can also use some disk management tools to do C disk expansion. >>>More
This fault phenomenon occurs when the boot system boot program detects an abnormal problem when the computer starts. Ignore the prompt at the bottom of the screen, press the Enter key directly, if you can enter the system desktop normally. Restart the computer again and it will be normal. >>>More
I don't know if there is a Vista optimizer, if there is, it will be easy to do.
There are a lot of error files on your hard disk,There is a folder system volume information that is installed in the scan and correction backup file,This folder is unique to NTFS,Since it is the backup folder of the system, the user can not open it,So the view attribute is O bytes and can not enter the view,But there are thousands of files backed up inside,Occupy a lot of space,Tens of MB,More than dozens of GB of data; If you don't want it to take up so much space, then you can only move your files out and format them and then move them back, and then solve the problem. It's just that you need to have a spare space that is as large as your data. Generally speaking, this is the problem I mentioned, and it can only be solved in this way.
I also have this under the C drive:
debug [02-20 main plugin created]: onconnectdebug [02-20 : new >>>More