HOW TO PASTE DATA INTO A FILTERED WORKSHEET IN EXCEL DETAIL 0 3

1. First of all, we must carry out data screening, and everyone understands data screening, because only when filtering data will we encounter such a problem, then go directly to the topic, and after the data is filtered, we should copy the L column of the F column, because the title is messy when the data is messy, and some rows are hidden, so the direct copy to the L column will be hidden, so how to display it normally?

2. Then select the test path "three networks" of column F, and copy this item to column L remarks, first copy the data, select all the column data that needs to be copied, and click copy or CTR+C by email;

1) Hold down Ctrl+;

2) Press and hold F5

3) Select, search, and target conditions.

Here are the steps to select F5 and targeting, if it's Ctrl+; Then you can paste it directly into the following column;

<>4. Select "Visible Cell" in the positioning condition, and the operation of the visible area in the visible cell format is visible;

5. Then right-click the first row under the remarks column and select paste, and paste the data in the visible area;

6. Finally, after pasting, all the data are copied to the remarks column, there is no lack of any row data, if you copy and paste normally, you can try it, it is not possible, only by pasting it to other ** in the upside down, it is more troublesome.

After you filter first, select all, first ctrl+g, click on the positioning conditions, the pop-up box that comes out, select "visible cells", OK, and then paste it in copy, to another**, and the filtered data will not be glued over.

I didn't understand the problem, but I pasted the data into Excel**, which had been filtered. Yours didn't solve the problem.

This one is very simple, and now Excel has implemented this function:

1. First of all, open the mega stupid excel**, and the data cells have been filtered in **.

2. Then select the cells that need to be copied and pasted in another Excel** and press Ctrl+C to copy the operation.

3. Then select the cell area that needs to be pasted in the scrambler and click "Find & Select" in the toolbar to select "Targeting".

4. You can locate the selected cell area.

5. At this time, press Ctrl+V or right-click the mouse to select and paste the value to paste the copied data family Li Bei into the visible cell.

After excel** filtering, copy and paste the data into the filtered cells by the following stupid key:

1.Open Excel ** and select the desired option in the column you want to filter, such as the number "1".

2.Click the selected cell to filter out the number "1".

3.Then click on the "Find" option in the toolbar and select "Target" in the drop-down box.

4.In the pop-up "Positioning" dialog box, select "Visible Cells" and click "Positioning".

5.Select the filtered cells in column A to copy the orange file high.

6.Switch to the new filter table box, right-click the selected cell, and select Paste Value to Visible Cell.

7.Finish pasting the data into the new filter.

1. To fill in the same data 90 in the filtered cell, enter 90 in the first box after the data filter.

2. Enter 90 in the second cell, select cells 1 and 2, and then drop down.

3. All the data in the filtered yellow cells become 90.

4. If you want to paste the yellow data in the lower right corner into the filtered language column data, first copy the data in the lower right corner.

5. Right-click in the language column data, and then select Paste Value to Visible Cell.

6. You can see that we have pasted all the data over.

7. If you choose to paste directly, the data will be pasted into the hidden column, and the error will be made.

When using excel, you will need to use the skills of copying and pasting after screening, if you don't know how to use the skills of copying and pasting after screening, you may wish to study and learn together, the following is the method of copying and pasting after filtering the excel** data shared by me, for everyone to read and learn.

Excel** data filtering and copy-pasting method1.Let's take a simple ** as an example to illustrate the situation where the copy-paste data loses the correspondence in the filtered state. The following chart shows an employee completion rate**, which needs to be listed separately on the right side with a completion rate of more than 80%.

If you have a lot of data, you need to use filtering.

2.Select the source data that needs to be filtered, that is, all the data in the Task Completion Rate column, and then click on the menu above"data"-"Filtering", then click on the inverted triangle (i.e., the filter marker) to the right of the task completion rate, and click in its drop-down menu"Data filtering"—"Greater than", such as a circle search map.

4.In this way, the required data will be filtered out, copied and pasted into the ** on the right, and the pasted data will be found to be incomplete.

5.After the filter is removed, it is found that the pasted data is complete, but the original correspondence is lost.

How to solve this situation?

1.After the user filters out the data they need, they use the formula method to realize the data correspondence. That is, enter "=" in ** on the right, and then click the corresponding data (here is 108%), and press Enter.

2.In this way, you will get the corresponding data, and then place the mouse in the lower right corner of the cell where the formula is located, and when the "+" is displayed, pull down to copy the formula.

3.After the filter status is removed, you can find that the data on the right is not only completely consistent with the filtered data, but also saves the original correspondence.

How to copy and paste excel data after filtering.

Excel** The method of copying data after filtering.

Excel**How to copy and paste the results after filtering.

Tutorial for copying excel data after filtering.

Excel2007 How to copy and paste data after filtering.

excel how to copy and paste filtered cells.

Tutorial for data replication after excel filtering.

How to copy the content after the content is filtered?

var _hmt = hmt ||function()

Because there are hidden rows after filtering, but the data you copied can only be pasted from top to bottom by pressing **, and will not jump the grid, the solution:

1. If there is little data, stick it one by one, ctrl+c, ctrl+v, which is also quite fast;

2. If there is a lot of data, the steps are as follows:

1. Make sure that the serial number column in Table 1 is a numeric value or text, and cannot be a formula;

2. Filter the number greater than 100, select these cells, and press alt+; (semicolon), padded yellow;

3. Sort in yellow in the current column, then the numbers greater than 100 will be arranged in the original order;

4. Copy and paste the data in Table 2, and it's OK.

If there is a sequence requirement for the data, then simply sort the ordinal number column in ascending order and it will be changed back to the original order.

1. To fill in the same data 90 in the filtered cell, enter 90 in the first box after data filtering.

2. Enter 90 in the second cell, select cells 1 and 2, and then drop down.

3. All the data in the filtered yellow cells become 90.

4. If you want to paste the yellow data in the lower right corner into the filtered language column data, copy the data in the lower right corner first.

5. Right-click in the language column data, and then select Paste Value to Visible Cell.

6. You can see that we have pasted all the data over.

7. If you choose to paste directly, the data will be pasted into the hidden column, and an error will occur.

If the content of a single cell is pasted into a single cell filtered out, it can be directly glued, if it is copied and the content of multiple rows is copied and pasted into the filtered rows, this can not be pasted, if the content of the copied single cell is pasted into a column of cells filtered out, you can select these cells by crl+, and then paste.

How to copy only the contents of visible cells when copying an area with hidden cells in Excel.

We often have to copy data areas such as "autofilter" results (with partially hidden cells in between), and if we just use "copy and paste" to copy the contents of the hidden cells, all we need is the contents of the visible cells. To do this, we can do the following:

Use the mouse to select the data range you want to copy, and press Alt+; Or point""->"Positioning", point"Conditional targeting", selected"Visible cells", point"OK"), and then execute"Copy"/"Paste"The operation is fine.

Maybe you will find it troublesome, then, please order"tools"->"Customize"->"Command", on the left"Category"box"", on the right"Command"list"Select the visible cells", hold it down with the left mouse button and drag it to the appropriate position of the common toolbar and release the mouse to close the custom window, so that you have added one to the common toolbar"Select the visible cells"button.

Next time, just select the data area you want to copy with the mouse (e.g. the auto-filtered results) and click on the common toolbar"Select the visible cells"button, and then execute"Copy"/"Paste"The operation is fine.

Add one more content: how to paste content into an area with hidden cells (paste only to visible cells).

You can add two secondary columns to complete the operation:

1. Add on the right side of ** before screening"Auxiliary 1"column, enter 1 in the second row, and press Ctrl+Left Mouse Button to scroll down to the corresponding row.

2. Execute your"Automatic filtering"Process.

3. Add one more on the right"Auxiliary 2"columns, select all rows of the column with the mouse, enter 1, and press Ctrl+Enter. (i.e., add a 1 to the column of all filtered result rows, and leave the column blank for all hidden rows).

4. Exit the filter state and press the full table"Auxiliary 2"Column sorting, your filter results will be concentrated in consecutive rows, then you can paste the content you copied into **.

5. Press the whole table"Auxiliary 1"To sort the columns, restore the order of the original table and delete the last two auxiliary columns.

Guaranteed to help you solve the problem, remember to give more bonus points!

Solution: Click the Reapply button in the Sort and Filter group on the Data tab, and then copy and paste.

1. Select the region to be copied "alt+; Then "Ctrl+C" is pasted in the paste area.

2. Filter first-unfilter-filter and then copy and paste (this is easy to use, but I don't know why it can be used like this).

3. After filtering, select the column to be copied, "CTRL+G"-Positioning-Visible Cells, and then copy and paste.

Note: 2 is a hundred trials 3 is more healthy to pump, sometimes can not be used 1 is the most convenient operation, great love) I hope it will help you!

1. Create a new data file in the bit knowledge required by the computer itself.

2. Fill in the original data in the file.

3. Select the header row of the data table, find [Sort & Filter] in the ribbon of the table, click to open and find [Filter], after clicking, the title item of the table will be in the Filter state.

4. Select the desired filter items, filter out the required data, click [OK], and the required data will be displayed.

5. Select all the data you want to copy, and find [Find & Select] in the functional area of the table''Click to enter, and then find [Targeting].''Then click to enter.

6. Enter the positioning options interface, find "[Visible Cell]", select and click the "Confirm" button below.

7. At this time, you will find that you have only copied the data you need.