Freelander tablet PD60 can you use a 3G wireless network card, except for wifi, thank you!

Dear users, hello! According to your description, yes, the settings of the telecom 3G network card 1, double-click the icon 2, log in to the wireless broadband client, and enter the main interface of the wireless broadband client. 3. You can choose any of the three connection methods for dial-up connection according to the network signal strength

Click the "Network Connection" operation button, the specific details are as follows: wireless broadband (WLAN) access, click the "Connect" button, and pay attention to the following points when using wireless broadband (WLAN) access.

You use the built-in or external Wi-Fi device in your computer to automatically search for a wireless broadband (WLAN) network (a wireless broadband network named "ChinaNet" (capitalization)) through the wireless broadband client. Enable the wireless broadband (WLAN) function when the customer applies for wireless broadband. The user is configured with a wireless broadband (WLAN) access account and password on the client software (if not configured in advance, the user will be prompted to set it during the connection process).

WLAN access and password" is set as follows: The customer starts the wireless broadband client, selects the "Settings" menu - > selects "Internet Access Settings" - > selects "Wireless Broadband (WLAN) Settings", then enters the correct name and password, selects "Liaoning" in the province of account opening, and clicks the save button to complete the setting.

If the above information does not solve your problem, you can also log in to Anhui Telecom Tianyi Store (

There is no 3G module itself, but an external 3G module can be purchased separately to support it.

If your wireless router supports wireless bridging, you can't, but no, no.

If you are a 150M product, you need to do WDS bridging.

Selecting WDS requires bidirectional scanning.

1.Before bridging WDS, you need to confirm that the wireless parameters (wireless network mode, channel, encryption rule, and password) of the two routes must be consistent.

2.Enter the secondary route interface, modify the wireless parameters to be the same as the primary router, modify the LAN port IP to be the same as the primary router, (for example, the primary router, click WDS to scan the secondary route to enter the primary router password (some versions do not need to enter the upper wireless password), and disable the secondary router DHCP.

For specific settings, please refer to: Tengda wireless router WDS settings.

3.Go to the Primary Route page and select WDS Scan.

If you are a product of 300m or above, you can choose the wireless signal amplification mode.

Choosing a wireless WAN requires only one-way scanning.

The wireless parameters (wireless network mode, channel, encryption rules, and passwords) of the two routes should also be set consistently.

1.Enter the secondary route interface, use automatic acquisition for Internet access, modify the wireless parameters to be the same as the primary router, and modify the LAN port IP to be different from the network segment of the primary route (for example, the primary route and the secondary route).

2.Click Advanced Settings - WAN Port Media Type, select Wireless WAN Scan, and enter the higher-level wireless password.

3.After the trunk, click Advanced Settings - WAN port status, and the connection is displayed, which means that the trunk is successful.

For specific settings, please refer to: Tengda Wireless Router Wireless WAN Settings.

Yes, you can put a 3G card into a wireless SIM card device.

How to connect a Shenzhou notebook to a wireless network.

Method Steps:

1. First of all, your laptop should turn on the switch of the wireless network wifi, and the switch position is on the keyboard, as shown in the figure below.

Press FN+F12 at the same time to turn on the wireless network.

2. After opening the taskbar, that is, in the lower right corner of the desktop, there is an antenna signal grid icon, as shown in Figure 3, click the signal icon with the left mouse button, pop up the sidebar, turn on the WLAN switch, as shown in Figure 4, click the name behind the signal, and then click Connect, enter your WiFi password to connect successfully.

Note: If the "Signal" icon does not appear in the lower right corner, please check whether the wireless network card driver has been installed.

No matter what computer, as long as there is a wireless network card, you can use wifi

The laptop has a wireless network card to connect to a wireless network, and the desktop needs to be equipped with a wireless network card, not a 3G wireless network card.

Buy a wireless receiver, about yuan! That's it!

Make sure your computer has a wireless network card, if there is one, you can connect it directly;

If not, you can connect an external wireless network card and connect.

Share common computer tips, computer knowledge, computer skills, computer common problem solutions, etc., today I share, whether the virtual machine can make the notebook built-in wireless network card, computer virtual machine use wireless network card tutorial, thank you fans for your continued support.

Can I connect to the Internet without a wireless card?

Of course, you can directly connect the route with a network cable.

Nowadays, most motherboards have integrated a common network card.

Dear Telecom users, Hello!

According to your description, it is recommended that you buy a wireless router, the setup is very simple, then turn on the power supply first, and then plug in the network cable, plug the incoming line into the WAN port (usually the blue port), and then plug in the network cable connected to the computer at will, after doing these jobs, then you will see that there is an address and account password behind the router, after connecting, enter the address you see in the router in the browser, generally when.

However, if your home is using ** online Internet, then you need to prepare an additional modem, commonly known as "cat").

Then enter, enter the corresponding account and password, generally the new ones are admin

After entering the operation screen, you will see a setup wizard on the left, Attack on the entry (usually it pops up automatically).

Enter the setup wizard interface.

Click Next, enter the Internet access method settings, we can see that there are three Internet access options, if your home is dial-up, then use.

pppoe。Dynamic IP can be used by plugging the computer directly into the network, and there is a DHCP server on the upper layer. Static IP is generally a private line or something, too.

It may be the cell bandwidth, etc., the upper layer does not have a DHCP server, or you want to fix the IP. I chose PPPoE because I dialed.

If you choose PPPoe dial-up Internet access, you need to fill in the Internet account and password, which should be understood by everyone, and there will be an account number to open broadband, and it is OK to fill it in

Then the next step is to enter the wireless settings, we can see the channel, mode, security options, SSID, etc., generally SSID is one.

You can fill in the name as you like, and then the pattern mostly uses 11bgnWireless security option we want to choose WPA-PSK WPA2-PSK, so safe and free.

You have to let people crack and rub the net.

The next step is to set it up successfully.

Click Done, and the router will automatically restart, so be patient. The interface that appears after success.

Thank you for your interest in telecom products and wish you a happy life.

If you have any other questions, you can also log on to the online business hall of Telecom (consultation).

The point of your question is: Yes or no"No", the answer is: Yes! You can use it or not, it's up to you.

Haha, it feels like asking for a brain teaser.

Yes, just install the wireless network card and driver, and you will see that there is a wireless network connection under the computer.

Desktop computers and laptops can use China Unicom wireless network card, you need to meet the following conditions to use China Unicom wireless network card:

1.Requires a wireless network card device;

2.You need to install the wireless network card client software on the computer;

3.The environment needs to be covered by a 3G network.

If you have any questions, it is recommended that you contact the local customer service for consultation.

If you install a wireless network card, you can connect to wifi like a laptop or mobile phone.

As long as you have Unicom 3G network coverage in your location, you can use the wireless network card normally, you can see if the Unicom card number is used around, if the signal shows 3G, then it can be used normally.

It's all okay.,Look at what you say.,Unicom is generally covered.,It's recommended to ask customer service.。