As soon as the computer is turned on, there is a tray programming failure and the symptoms of cras

Viruses and Trojans are scanned and killed in safe mode!

Reason: It is all caused by the failure of the hard disk, even if you use a disc or USB flash drive to boot, it is useless.

Here's how to fix it:

1. First of all, open the case cover of the computer, find the hard disk and disconnect the power cable and data cable of the hard disk;

<>3. After entering the boot interface of the USB flash drive, plug in the power cable and data cable of the hard disk back;

4. Now you can enter the DOS interface, enter the DOS interface and then clear the hidden partition of the hard disk, this computer is a brand machine, using HPA (Hidden Protected Area) all to clear HPA, DOS under the input MHDD enter;

<>6. Enter "y" when prompting whether to perform the operation, press enter, as shown in the figure below, and then enter "y" enter, and then restart.

In fact, there are many ways to clear hidden partitions, such as: diskpart, hpatool, hddfunc, etc., in addition, mhdd only supports hard disk ide mode, sata mode can not see the hard disk and this method may cause data damage, it is recommended to enter pe mode to back up data in step 3.

1。Restart the computer, after the computer brand is out, press F8, Safe Mode, the last correct configuration, Enter, Enter!

2。Software conflicts, incompatibilities: redundant similar software installations! The computer is overclocked or there is too much software installed, and the system memory is insufficient!

360 Butler, Software Uninstall, Find Uninstall, Again: Powerful Cleaning!

Or: Start Menu, Programs, Find Excess Software Uninstalled!

3。The computer system is interfered with by stubborn viruses and Trojans or worms, or you have lost your system files!

360 system first aid kit, start first aid, after finishing, restart the computer!

After booting up, [File Recovery Area], click on: suspicious startup items and Trojans, delete files completely!

Again: [System Repair], select all, fix it now! [Network Repair] to start the repair. Restart your computer!

Antivirus, Full Scan, Quarantine, Trojan and Suspicious Viruses, Point: Completely Removed!

5。Do it when necessary: restore the system or reinstall the system with one click!

6。Hardware problems, hard disk or motherboard or fan problems, send it for repair!

Some computer motherboards generally have a hardware storage function, you press a specific key to enter when you boot up, enter the protection card, such as Lenovo machine with the home button to enter the protection card, recover the data or.

Uninstall the protection card and reinstall the system to give it a try.

You install a Jinshan Guard.,See if there's anything in the boot program.,It's disabled.。

Or fix it.

It was no longer possible to reinstall the system.

Don't worry, this is a system software that is missing, if you are annoying, fix it, and it will not affect the use.

Please refer to the following for the specific software description:

It is a program of the ATI graphics card control center produced by ATI company. This problem will occur after upgrading the corresponding driver to the graphics card of the laptop (I am using the Vista operating system, and the graphics card driver is upgraded online). This program is not required.

If it causes instability to your computer system, you can remove it.

Solution, it is recommended that the landlord directly uninstall this driver to solve the problem!

The ATI graphics card driver is not loaded properly.

You don't have to worry, it's not a virus program.

This app doesn't have to run automatically.

Suggestion: Disable it in the program that runs automatically at startup, this feature can be found in 360 Security Guard.

You can also find it by starting-running-msconfig-starting, and turning it off hope it can help you!

Repair the system can be done if your computer has a system restore class of files. There are several ways to solve this situation, such as the small sentry restore card, or one-click restore of the computer's own premises, provided that you have backed up the error before you made the error.

？Such a strange name, is it a virus? If it's a virus, it's recommended to reinstall the system! Or fix it with 360! Pay attention to clear all startup items! If you still have questions, just m me!

1. Keep clicking the F8 key when you boot up, enter the system operation menu, select "Last correct configuration", restart the computer, and see if it can be solved.

2. Boot up and keep clicking the F8 key, enter the system operation menu, select "Safe Mode", if you can enter successfully, click "Start" "All Programs" "Accessories" "System Tools" "System Restore", the "System Restore Dialog Box" appears, and select "Restore my computer to an earlier time". In this way, you can use the built-in system restore function of the Windows system to restore to a restore point when the computer was able to boot normally.

3. Use the system to install the CD-ROM disc, put it in the CD-ROM drive, restart the computer, enter the CD-ROM installation system state, wait until the boot interface flashes, do not choose to install the system, but choose the repair system, repair the current system (it may run for a long time, 2-4 hours is possible), wait patiently for the repair to be completed, and see if it can solve the problem.

You'll have to see what the English message is.

Is it a blue screen or a crash? Unplug the memory and clean it with a brush. Then plug it in and take a look, and personally feel that your machine is not the fault of the hard drive. Or with a real partition grid from the new.

Hello, I'm glad to answer for you, please later, I'm working hard to sort out the answer for you, and I'll reply to you within 5 minutes.

The computer crashes after booting into the desktop, which is caused by too many tasks running in the system, resulting in the exhaustion of the computer's hardware resources, and the specific repair methods are as follows:

1. First press the Ctrl+Alt+Delete shortcut on your keyboard, then find Task Manager in the new interface that appears and click Open:

2. Then the interface of the task manager will be displayed on the desktop, where you can see the software that is currently running:

3. Select the software that needs to be terminated immediately

4. After selection, click End Task in the lower right corner

5. Finally, click on the file in the upper left corner of the window in the task manager to run the new task. In this way, the computer will not freeze and can be used normally:

Well, I guess it has something to do with the graphics card.,,Try it.。

It should be a setting issue and will not affect your use. You can fix the registry first:

Open the registry"Start running"dialog box, type"regedit"Open the registry

In turn, hkey local machine software\Microsoft\Windows\CurrentVersion Run

Delete the right one; If not, clean up the registry with Optimizer, don't say you won't use Optimizer.

Again, you can enter "eventvwr" in the operation to see if it is a program error or a system error, and then say, if the program fails, the program will be closed or deleted, and if the system fails, it can only be restored.

If it's a problem with the system files, and you turn off System Restore, you have to reinstall the system