I just bought an IBMX61 laptop yesterday and found that I could connect to the wireless network when

**There is such a good thing, notebooks are generally not equipped with wireless network cards, there must be AP accepted by you,

There is an AP next to your house, and if it is next door to your house, it is normal for the signal to be good next to the wall.

Your home attachment has a signal, and it's the kind without a password.

You're in luck.

There are people near your home who use wireless Internet access, but there is no encryption, your computer has its own wireless configuration, which can be monitored, it should not be AP, it may be ADSL, or LAN broadband, etc., with wireless routing on it, and the signal within 300 meters is very good.

As it was said upstairs.

The book does not install a wireless network card, and I didn't go to open the Unicom mobile service,And you can access the Internet wirelessly, it can only be that you receive an unencrypted wireless LAN signal nearby, or there are wireless hotspots like KFC around your location (AP),Indoor30-100 meters,Outdoor 100-300 meters, if there is no obstacle, the signal is still good。

If you want to use wireless for a long time, and if you want to be stable, it's best to make a wireless router and add it to the wired broadband modem, and set it appropriately in the notebook; If you want to set up a wireless WAN, China Unicom's CDMA 1X is relatively fast, with a monthly subscription of about 120 and an annual subscription of about 1200.

Oh, friends who use wireless in Beijing will find that there are many hot spots around, but they are unstable, the landlord's luck is good, the signal is so strong! There are six free hotspots near my house, but all of them are unstable, and they fall off after a while.

Your question is not very clear :

1、X61The use of the mobile phone's wifi is very simple,The mobile phone can be solved by installing a wireless hotspot software,Now there are many such software in Android machines。

2. If you want to use the telecom broadband resources at home, X61 can buy a wireless router and install it back, and there is no other way.

Lenovo computers enable none.

BAI line network.

DU card and connect to wifi method:

1. Right-click the network icon DAO on the desktop, open the network sharing center, change the adapter settings, right-click the wireless network, and enable.

2. Or there is a wifi switch on one side of both sides of the computer, just move it to the side, or you can press the key combination fn+f (wifi icon).

3, or directly click the network icon in the lower right corner of the desktop, and then turn on the wifi to turn on the wireless, and then click the wifi name to connect, click to connect, enter the password to connect to the Internet.

Debug the wireless network device, and then turn on the wireless network of the notebook.

Install the software that comes with it.。。 There is it in the software.

Is it a wireless router? What is the brand.

It won't be long before you connect directly to the wireless network, and the mobile phone has that function.

Dear Lenovo users, hello!

You need to turn on the hardware switch of the wireless network card of the machine first, and then use FN+F5 to open the software switch interface to set the wireless function to be used.

The Lenovo Thinkpadx61's wireless network switch should be turned on in both:

Hardware switch of wireless network switch: Push the switch on the left side of the notebook, toggle to the side with the wireless network icon is on.

Software switch of wireless network switch: press the FN+F5 key at the same time to turn it on.

The hardware switch is on the left side of the computer, and the software switch needs to be updated with system update to update the driver and software.

All wireless networks can have the AP function you said, what system are you? XP is to share the NIC on the NIC you want to set. Win7 is all about creating a new temporary network in the network center. That's it.

Your Bluetooth adapter is not recognized by the system, you need to install the driver of the Bluetooth adapter.

Search for Bluetooth management software on the Internet and install it.

Introduction of the FN key combination FN+F3 Turn off the LCD display so that the screen is not displayed.

fn+f4 puts the system into suspend mode. To recover from the suspended state, press the fn key (don't press the other key).

FN+F5 ON turns off the built-in wireless network signal (IEEE wireless network). If you press this key combination, a wireless signal control window will appear, listing the currently available wireless devices. Users can quickly change the power-up status of these wireless devices in this window.

FN+F7 toggles the display output between the LCD screen and the external display.

FN+F8 When the screen resolution is less than the actual resolution, press this key combination to turn the screen expansion on or off, so that the screen display can be switched between normal mode and extended mode.

FN+F9 Open the IBM ThinkPad Easyeject Utility program, which displays the following buttons:

Eject ThinkPad PC from X4 Ultrabase: This button will appear if the laptop has an X4 Ultrabase dock connected to it. With this button, the X4 Ultrabase can be deactivated.

Run easyeject actions: Users can select, deactivate, and uninstall external devices connected to their laptop.

Configure EasyEject Actions: This button allows the user to open the main interface of the IBM ThinkPad Easyeject Utility.

FN+F12 puts the computer into sleep mode.

FN+PAGEUP turns on the ThinkLight light.

fn+home increases the brightness of the screen.

fn+end reduces the brightness of the screen.

fn+spacebar enables full-screen magnification.

shift+numlk to enable numeric keypad.

Sometimes you encounter the problem that the window cannot connect to the wireless network, and this situation may occur because the password of the wireless network has been changed.

The solution is as follows:

1. Click Open Network and Sharing Center.

2. Then click the "Manage Wireless Network" button.

3. Then click Delete Network.

4. Then find the previously inaccessible wireless network and click on it.

5. Finally, enter the network security key, enter the password, and click "Connect".

Windows can't connect to the wireless network because the password for the wireless network has been changed.

The steps of the method are as follows:

1. First, click "Open Network and Sharing Center".

2. Then click the "Manage Wireless Network" button.

3. Then click Delete Network.

4. Then find the previously inaccessible wireless network and click on it.

5. Finally, "Type Network Security Key" will pop up, after entering the password, click "Connect".

Dear Lenovo users, you can try to uninstall the current wireless network card driver, restart it, reinstall the driver test on the official website, and pay attention to choose the version corresponding to the system.

It's you who can't set it up, drive the problem, fix it, or reinstall the system, go to the official website to find a corresponding wireless network driver.