My configuration is very stuck playing DNF, I don t know if it will not be smooth when I adjust the

Your settings are very problematic, the virtual memory is not as big as possible, and not every disk is set, in fact, there are settings for virtual memory to a fixed value, there are also floating, some are located in the C disk, there are other disks, depending on your needs. Set to a fixed value of less fragments, set in the C disk will make the speed faster, but may produce fragments, you can set it closest to the C disk, just set a disk, other disks set up no benefit. Your configuration should be no problem to play dnf, set the virtual memory to about 512-768, set it in the C disk, and usually pay attention to optimization.

Virtual memory,After all, there is no physical memory cow b,Long response time,It should be adjusted to times the physical memory,The reason for your unfluency is the graphics card,You take out a piece of gf6200Try it,I suggest you change the machine directly,Sell the original one,About 2,3 hundred。

If you're only playing DNF, use the first configuration, and if you have the budget and need it, use the second configuration.

Display Great Wall M99 730... Fainting, nerve-wracking.

Motherboard ASUS P5N73 399

CPU Celeron E1400 280 It's really hard to add some budget hard drive Seagate 160G 300

Optical Drive Optical Drive Pioneer ***-130d 12000 keyboard and mouse pirated 50 can't be helped.

Graphics integration. Memory: Apacer 1G 90

Chassis Power Supply: Kaneda Hurricane 8207B 355W 206 Total Price 2175

Should be able to play small 3D games If you have enough budget, use the following plan: Ask him if he has a Core 2 Duo E7200 If he has, buy this CPU: Core Duo E7200 660

CPU Intel Pentium Dual-Core E5300 495 Motherboard Weconex P43 God of War Edition.

Memory: ADATA 2G DDR2 800 (Thousands of Purples) Display: Samsung 943NW 859

HDD Seagate Barracuda 160 295

Graphics: Shadow Tyrant GX5 Pangu Edition.

Optical drive Pioneer ***-130D 12000 keyboard and mouse set Kane Kawada office master.

Chassis Power Supply: Kaneda Hurricane 8207B 355W 206 Total Price: 3363|3198

DNF has a lot to do with network speed, the card is not necessarily the reason for the configuration, DNF does not have high requirements for configuration, and there is no problem with you playing DNF with this configuration.

Virtual memory is primarily a matter of web speed, not of gaming.

However, you'd better set the virtual memory of the C drive to 0

Then the next optimizer cleans up the expired and useless junk files.

Ok playing dnf is smooth.

Nothing to use ... You turn down the graphics card effects.

I'm sweating, the memory is OK, but the CPU is not good, go overclocking or buy one.

DNF super memory can improve the smoothness of the picture, and high-quality memory will definitely improve the smoothness of DNF. Increasing the memory can definitely improve the smoothness of DNF a lot, but if the CPU is not powerful, there will still be a little bit of a small card in the group. DNF does not have high requirements for memory,The minimum 2G can be,Smooth a little bit on 4G,Often play 20 people on the key 8G,The system of this game is best not on win10,All kinds of incompatibility problems。

Increase the memory and run more smoothly.

DNF's demand for computers

The computer 8G memory can play dungeons can be played, but it will be stuck, it is recommended to install an 8G memory stick.

Target. DNF does not have high requirements for memory,The minimum 2G is OK,Dry balance is smooth and smooth4G,Often play 20 people on the team8G,The system of this game is best not on Win10,All kinds of incompatibility problems。

The main frequency of U,8G memory is completely sufficient,Although the graphics card is average,But the poisoned milk powder does not burn the graphics card,The only thing to pay attention to is that it is not bent to do,If the hard disk is a mix of solid and mechanical,Then don't install anything in the solid state except the system,If there is only one solid state, then when I didn't say,Remember, the more important **,** and office documents in the computer are put into the mobile hard disk。 Village.

My Computer - Properties - Advanced - Performance - Settings - Advanced - Virtual Memory - Change.

Set the initial value of virtual memory to 1024M, and set the maximum value to 2048M, as long as it is not set in the C drive, it will not affect the operation of the computer.

However, the reason for playing DNF cards is not necessarily caused by virtual memory, but may be related to the physical memory of the CPU graphics card. It may also be affected by the speed of the Internet. You can judge it according to the actual situation.

Right-click on My Computer, Properties, see the System Properties dialog box, click Advanced, click Settings on Performance, and click on High.

This is where the rectification of the virtual memory occurs.

Click Customize.

At this time, you can set it up.,You can make a bigger macro core.,,But don't do it in C:Okay,,This is the system disk with an oak reed to do it.,,It's not a good thing to do it.,,It's going to be stuck.。

Don't allocate too much.,It's not that the more you sell and the better.,1G of physical memory,You put the disk setting of the large game with empty traces 256m 768m.,Other small programs with Bi Sequence.,Movies or something256m 512m,Note that don't put any program games on the C disk.,It's also 256 512.

Virtual memory is to use a part of the hard disk space for memory when your physical memory is not enough, but because the speed of hard disk transfer is much slower than the memory transfer speed, the use of virtual memory is slower than the efficiency of physical memory, and at the same time, virtual memory will produce a large number of disk fragments, which will seriously affect the system speed. In general, 1GB of physical memory is sufficient, completely believable to skin without setting up if playing games.

1. Let Windows automatically allocate and manage virtual memory, which can dynamically adjust the size of virtual memory according to the actual memory usage, so you can set virtual memory to automatic. System Management Virtual Memory Setting Method:

Right-click on My Computer--Properties--Advanced--Performance Settings--Advanced--Virtual Memory Changes--Select the partition where the virtual memory (page file) is stored in the drive list -- Select "System Management Size", then click the "Settings" button, and finally click the "OK" button to exit.

2. Customize the virtual memory setting method:

1) The general default virtual memory size is to take a range value, it is best to give it a fixed value, so that it is not easy to produce disk fragmentation, 1GB is set to 512MB, 1024MB or 1536MB, no matter how large it occupies too much hard disk space, it is easy to generate a large number of disk fragments.

2) The specific steps are as follows: right-click on My Computer Properties Advanced Settings Advanced Virtual Memory.

Change Select the partition where the virtual memory (page file) will be stored Customize the size Determine the maximum and minimum settings OK.

3) The partition where the virtual memory (page file) is stored must have enough space, and the hard disk resources are insufficient, resulting in insufficient virtual memory; It is enough to set up virtual memory in one partition of a computer, and it is not necessary to set up virtual memory in other partitions, which is generally located in partition D close to the C partition where the system is installed.

4) Cancel the virtual memory, click the partition where the virtual memory (page file) is stored, click the no paging file Settings OK.

1. Infected with the virus!

Some viruses take up a lot of memory space when they break out, causing the system to run out of memory. Hurry up and go to the antivirus, upgrade the virus database, and then get the antivirus measures right!

2. Improper setting of virtual memory.

Improper setting of virtual memory may also lead to the problem of insufficient memory, under normal circumstances, the size of virtual memory is 2 times the size of physical memory, if it is set too small, it will affect the normal operation of system programs. Resize virtual memory Take WinXP as an example, right-click "My Computer", select "Properties", then in the "Advanced" tab, click the "Settings" button in the "Performance" box, switch to the "Advanced" tab, and then click the "Change" button in the "Virtual Memory" box, then reset the virtual memory size, and restart the system when you are done.

The virtual memory is insufficient because the virtual memory settings in Windows are too small or the hard disk space where the virtual memory is located is insufficient. It is recommended to place the virtual memory in a different partition from the operating system, and set a fixed size, generally 1 5 times the memory capacity of the system; Right-click "My Computer", select "Properties", pop up the system properties window, select the "Performance Options" tab, click the "Virtual Memory" button below, pop up the virtual memory settings window, click the "User Specify Virtual Memory Settings" radio button, "Hard Disk", please select the partition with a larger remaining space, and then enter the appropriate range value in the "Minimum" and "Maximum" text boxes. If you're having trouble using the system to get the maximum and minimum values, you can choose to "let Windows manage the virtual memory settings", but make sure that the partition where the virtual memory is wiped out is large enough (more than twice the amount of system memory).

Wheel stop. 3. Insufficient system space.

The virtual memory file is in the system disk by default, such as the virtual memory file name of WinXP", if the remaining space of the system is too small, resulting in insufficient virtual memory, there will also be a problem of insufficient memory. The system disk must reserve at least 300MB of free space, of course, this value depends on the actual needs of the user. Try not to install various application software in the system disk, ensure that there is enough space for virtual memory files, and it is best to place virtual memory files in non-system disks.

4. Because the system user permission is not set properly.

When a Windows system based on the NT kernel is started, the system user creates a virtual memory file for the system. For the sake of system security, some users use the NTFS file system, but the system user's permission to "write" and "modify" in the system disk is canceled, so that it is impossible to create virtual memory files for the system, and the problem of insufficient memory will also occur when running large programs. The problem is easy to solve, just re-grant the system user the "write" and "modify" permissions, but this is limited to users who use the ntfs file system.

If you like to play large and medium-sized games, or often use 3D software, and the memory (including video memory) capacity is not large enough, the system will often prompt that the virtual memory is not enough, so that the computer often freezes. This is where setting up virtual memory is even more important.

Virtual memory is when the computer is running a program, when the memory is not enough, the computer will open up disk space from the hard disk as memory usage without real-time jam or crash, this part of the hard disk space is called virtual memory.

Here's how to set it up in a very detailed and simple way:

Right-click on "My Computer" on the desktop Stats Advanced Click on "Settings" in the "Performance" area Click on the "Advanced" tab Click "Change" in the "Virtual Memory" area.

Select the system drive letter (usually C drive) in the drive list, then select the "No paging files" item, and then click the "Settings" button.

Then select a partition with a large free capacity in the drive list (e.g. D drive, E drive, or F drive) Select the "Custom Size" option and fill in the "Initial Size" and "Maximum" columns.

It is recommended to set the initial size to multiple the memory module capacity of your computer, and the maximum value to be 3 times the memory module capacity (384 and 768 if your memory module capacity is about 256m, 768 and 1536 if your memory module capacity is about 512m, and 1536 and 3072 if your memory module capacity is about 1g). Tip: Virtual memory only calls the capacity of your hard drive temporarily, so rest assured, it won't take up the capacity of your hard drive forever.

Click "Settings", then "OK", and finally restart the computer, and the virtual memory settings will take effect.

Click on my computer. Right-click. Attribute. Senior. I choose the setting of the performance. Senior. The bottom one is the setting of the virtual memory.