-
Keyboard problems, key conflicts... Hold down one key, and some other keys don't respond when they are pressed...
-
Caused by poor contact. A bunch of crap on the 1st floor,
-
That's a computer problem, not a technical problem with you.
-
If you are unwilling to return the keyboard after sale, you can consider rebuilding, E drift, W nitrogen, and Q replacement props. Hope.
-
Shiftshift and left key conflicts,It is recommended to sell it.。。。
-
The keyboard conflicts, and I don't know how to solve this. It's an internal issue with the keyboard.
-
Because the right one is broken, and the left one is okay.
-
Brother, the one on the right can be used, and the arrow keys can still be used on the small building plate!
-
It means that the quality of this keyboard is not good, and the n keys of a good keyboard have a response when pressed together.
Poor 2-3 keys are stupid to press (only happens in a few specific combinations, such as yours is shift + my previous keyboard was w and a when I played cs).
Since it's a notebook, it's too much trouble to change the keyboard, so it's better to buy a better external keyboard or simply use a controller.
-
Conflicting keybits.
You can try an external keyboard.
-
There are a lot of notebooks like this, and mine is to buy a junk external keyboard.
-
Because shift+ctrl is pressed together to change the input method,So it will be stuck on the screen。
-
The left and the right are the same ...
-
It's best to change the keys, and it will drop when you use this for a while.
-
You can only press it twice, and the third time it will drop. Don't press all at once, press Ctrl+Spacebar if you want to. That won't drop out. It is recommended that the key is preferred. Otherwise, it will affect the grades.
-
This will get the input method out.,Don't press it like this.。
-
Press the input method together and press it out Ctrl+Space to try.
-
Immediately after shift, press ?? What kind of press is this?
Is your keyboard very old? Some keyboards are like this, get a new keyboard, 40 blocks to get it, or you have a problem with your pressing, very problematic.
Addendum: Your operation problem Let's practice drifting first I think you have a problem with your foundation Play novice training to see how it drifts The so-called drift doesn't need to be learned at all Drift is familiar with it You can understand it yourself.
Supplement 2: If you haven't set up any so-called hotkeys (it should have nothing to do with this) it's a keyboard problem, if you don't believe it, you can buy a regular keyboard or borrow someone else's keyboard to try your keyboard has key conflicts.
I'm surprised that such a new wireless device still has this kind of problem, but you can check if there is any problem with the battery and whether there is dust in it or something.
-
Use WASD or up, down, left and right or keypad 8462
can be operated.
If it's a keyboard thing, you can switch to another place.
-
I think it's your technical problem. Hehe. Never mind. I just can't spray. Will you???
-
It's the first to press !Then + the direction of the direction you want to turn + shift
-
This is a normal phenomenon, the reason for this phenomenon is mainly that you press the drift key for the first time remember that in any case, it is best to initially follow, if you really often this phenomenon, you can use "drag and drop drift, drift, not pull out before in the past tractor?" Very useful!
-
In fact, this is a common problem, the problem is that the keyboard is locked, if you use the number keys to run, you can leave the keys 2,4,,6,8, and all the others are buckled down, try again, sometimes your fingers press the arrow keys inaccurately, it is possible to touch the keys on the side, causing you to be locked when you press the shift key, and then install the keys to practice more after you are completely used to it.
-
This is normal, the main reason for this phenomenon is that you press the drift key first, remember, in any case, it is best to press the square phase first, if you really often have this phenomenon, then you can use "drag drift", do not pull the head of the car when drifting, let the car drag over, this is very effective!
-
This is normal, the main reason for this phenomenon is that the first time you press the drift key, remember, in any case, it is better to press the lower phase first, if you really often have this phenomenon, you can use "drag and drop drift, drift does not pull out before, so in the past tractor, this is?" Very useful!
-
It may be a keyboard problem, and it's like the 3rd floor, you have to press forward first, and then press shift.
-
The drift must be in the left and right directions. Shift is a tap to drift. Otherwise, the forward or backward rush is not drifting.
-
The car must be tilted, e.g. by pressing the D-pad up button and left button.
-
I'm sweating, do you have to press the arrow keys for drifting? Up + shift + arrow keys to drift.
First, there is a possibility that you have a quality problem with your keyboard. >>>More
Operating system: win98 2000 me xp win98 2000 me xp
CPU Pentium3 or above, Pentium4 or above, Memory 256M, 512M >>>More
Maybe it's because the keypad lock key wasn't pressed, it's the "num." >>>More
Your keyboard works on other machines, the right alt key works, but it doesn't work on your own machine? >>>More
This may be aware that the system is still reviewing and filtering your problem. As long as your question isn't too excessive and doesn't violate the principle of knowing, how long will it show. >>>More