Ask the master for advice on how to overclock the CPU with the core open

First of all, I want to say,Open the core is a lot of damage to the CPU,Don't believe those so-called reviews.,Recommended.,Breaking the core strategy or something.。 Have you ever seen anyone say that it will be stable for a long time after breaking the nuclear weapon? Otherwise, they are all tested by AMD under the same assembly line.

Why doesn't AMD itself break the nuclear (sell it as 4 cores and 3 cores) and sell it for more money.

Of course, if you're overclocking for the sake of overclocking, then overclock, but the consequences. You can't just look at how much the world's masters have fried U, but also how many U they have burned. You can't just hear about air-cooled 4GHz and you don't need to see them on 4GHz, and it's not your own U (manufacturer's engineering sample).

You look at those who have nothing to do with the limit to play u, it's not a place where the money can't burn.,If you want me to say,We're not rich.,It's better to take care of your own things.。

0 is a big performance bottleneck, this board does not support the bus, HT only has 1G HT frequency, Hyper Transport technology supports bandwidth, and CPU is can run 2G HT frequency, maximum bandwidth bandwidth, this bandwidth is very affecting performance, in addition, this board only supports, and your graphics card is supported, the constraints on the graphics card are very obvious, so this motherboard has become the bottleneck of your system, which has a very big impact on performance, In addition, you also mentioned hybrid firefighting and overclocking, then I recommend you to use Yingtai TA880G HD, this motherboard supports and, also with overclocking and onboard video memory, and can crossfire with your 5550 group, that A880G+ is not with overclocking function, so you must choose good things when choosing, remember, if you don't understand, you can ask me in the station.

The open cores are for the native quad-core (almost all of them are native quad-cores) and are exited by AMD.

It's that this CPU is unstable in the quad-core situation, but AMD doesn't want to make a big name for small interests, and it also gives a more objective positioning and **, so it blocks one or two cores.

The commonly used ones are 220 440 open cores, which are dual-core and three-core open quad-core, which must be the original quad-core (that is, the native quad-core), if the native dual-core is no choice.

Open core, stability is still relatively good, cost-effective.

Of course, the stability of buying quad-cores when buying can't be said to be spent in vain.

Most of the overclocking is super-frequency, and most of the non-black box U are shielded and multiplied (but the multiplication is easier and more convenient than the external frequency). Overclocking is to give him a higher frequency, and the super also needs to be pressurized and the memory is downclocked.

It's all harmful to the computer's U, generally U's life is about 10 years, if it is in a high-voltage or overclocking state for a long time, it may be reduced by two or three years, but in fact, it is developing so fast now, and it would be good for a U to accompany us for five years.

Super flat is mostly used to solve the bottleneck problem, if necessary, it is still necessary for Xiaochao, hehe!

Open-core is to "open" several cores shielded by the manufacturer, while overclocking is to increase the frequency to improve performance.

For example, if you only have 2 people (2 cores) to serve you, after you open the core, your subordinates will become 4 people (4 cores) to serve you. Overclocking is the same as driving, it turns out that the speed of 60 miles is normal, but if you want to drive faster and increase the throttle, it becomes 80 miles, but the stability of the body, fuel consumption and so on have changed.

Add voltage, adjust the clock, change the frequency multiplier, and at this time, why do you have to buy a 4-core one to play, of course, you have to wait to change the motherboard and change the graphics card.

Since K8 has entered the era of multi-core CPU, since it is multi-core, it is inevitable that different cores can be identified in the platform. In the past, overclocking was the overclocking of multiple cores together, but due to the different constitutions of each core and the overall overclocking status of the CPU, overclocking could not achieve satisfactory results. And AMD

overdrive

For the core with good physique, it can be exceeded, and the core with average physique can be less exceeded, and the CPU performance can be maximized through reasonable collocation.

Turn the outer frequency higher.

Let the outer frequency multiplied by the frequency be greater than your CPU frequency.

Break the fan.

It burned in just a few hours. Hey.

1 minute to teach you how to overclock your CPU.

Prepare a good radiator, the fan speed should be at least 1000 minutes, and the room temperature should be lower, otherwise you should install water cooling.

After installation, debug to see if the fan is noisy and use the driver wizard or other software to measure the temperature of the CPU and hard disk.

First, start the computer and press the DEL button to enter the BIOS setting interface of the motherboard. Select Soft Menu III Setup from the BIOS, which is to upgrade the motherboard's SoftMenu overclocking feature.

After entering the function, you can see that the system automatically recognizes the CPU as 1800+. To press enter here, change the default recognized model to user define mode. After setting to manual mode, the CPU external frequency and frequency multiplier that were not selectable in gray are now optional.

If you need to overclock with boost external clock, press enter at external clock:133MHz. There's a lot of external frequency to adjust, and you can tune it to a 150MHz or higher frequency option.

Because increasing the external frequency will increase the frequency of the system bus and affect the stability of other equipment, the method of locking the PCI frequency must be adopted.

One of the multiplier factors is to adjust the CPU frequency multiplier, enter the options area, and you can choose the frequency multiplier according to the actual situation of the CPU, such as or a higher multiplier.

In the BIOS, the core voltage of the CPU can be set and regulated. Normally, you can select the default state. If the system is unstable after the CPU is overclocked, you can add voltage to the CPU cores.

However, the increase in voltage is very large, first of all, the CPU heat will increase, and secondly, the voltage is too high and it is easy to burn the CPU, so you must be cautious when adding voltage, generally you can add it up or step up.

Novices must pay attention to the temperature of the machine, otherwise it is easy to scrap the machine (if you are rich or the machine is worthless, you can play).

Go to the BIOS, the first Frequency Voltage Control on the right, go in, and find the CPU Frequency and CPU Voltage

Let's watch the change within the safety of the road.

Have you added other cooling devices to your case?

It's best not to overshoot if you haven't added it.,It's easy to burn the CPU when it's hot now.。

Play overclocking first to check whether the heat dissipation can withstand it.