The computer uses BAT to get the computer time synchronized, the date is synchronized, but the time

According to the above prompts, the explanation is that the time system of the bat program is different from the standard of the operating system, and the problem arises, for example, the time system has a 24-hour system and a 12-hour system.

As for the problem, you need to find out.

Hello dear, happy to answer your <>

The computer date and time can not be synchronized method 1: first of all, it must be ruled out whether it is virus interference, sometimes due to the destruction of the virus program, it will also cause the time program to be affected, and the computer time can not be synchronized and the computer time is inaccurate.

Therefore, first carry out a comprehensive inspection and kill the computer to remove the Trojan virus in the computer. Method 2: If your computer is relatively old or used for a long time, only a similar situation occurs, then it is recommended to replace the motherboard battery, because the computer time is mainly powered by the BIOS battery on the computer motherboard after the computer is shut down, if the computer shutdown shortly after the boot time is not accurate, then it is necessary to consider changing the battery, of course, you can also not change the battery, but the computer power plug must be plugged in all the time, because the computer power is turned off and there is still a standby power supply inside, which can still help the main spot BIOS power supply, However, the disadvantage of this is that the standby power supply needs to consume power (generally very little), and the other is that it is afraid of lightning causing damage to the internal hardware of the computer.

Method 3: If the computer entry time cannot be synchronized with the time and date attributes, manually modify it in the time and date. Hope mine is helpful to you.

Inaccurate computer time is a very troublesome problem, and if the time is not right, some important things will be delayed. After clicking to adjust the date and time, the next boot is incorrect, what's going on? There are many reasons for this type of problem, so let's take a look at the specific causes and how to fix them.

What should I do if the time of the win10 system computer is not synchronized

Here's how:

1. Find the time area in the lower right corner of the desktop, and right-click the option menu;

2. Select the "Adjust Date and Time" option to enter;

3. Switch the default panel of the date and time window to "Internet Time" to select the infiltration and boring item card;

4. Next, click the "Change Settings" button in the window to enter;

5. Check the "Synchronize with Internet time server" option, and re-select the server as ";

6. Click the "Update Now" button, wait for a while, and when the time synchronization is successful in the display of the window cluster bend, you can click OK to close all windows.

After referring to the above tutorial settings, we successfully fixed the problem that the computer time could not be synchronized, and the time was not synchronized easily, which could easily affect our schedule and arrangement.

Friends, do you have obsessive-compulsive sparrows, if so, will you want to synchronize them when you see that the computer time and the network time are different? If there is, then refer to the New Year's shirt and then look down at what is written, and see how it synchronizes computer time and network time.

Sometimes we find that the time of the computer is different from the time of the network, so how do we synchronize them? Next, I'll tell you how to synchronize computer time and network time, so let's go and take a look.

First, click on the time at the bottom right of the desktop, and click on the pop-up box to change the time and date.

Computer time and network time synchronization.

Computer time and network time are synchronized with computer**1

Next, select "Internet Time" in the pop-up box.

Computer time. Computer Time Computer**2

Next, select the "Internet Time" option, tap on "Change Settings", and click on Update Now.

Computer time. Computer Time: Computer**3

Network time. Network Time Computer**4

Then it will prompt a timeout error, at this time go to see the window time in the service, the service is turned on, and my computer watch email selection management.

Computer time. Computer Time: Computer**5

Then, find the "window time" and find that it is turned off, turned on, and set to automatically start the service, so that you don't have to change the time every time.

Network time. Network Time Computer**6

Computer time. Computer Time Computer**7

Finally, you will find that the time and date are synchronized

Turn on the computer, open the computer's settings, there is a computer setting time in it can be synchronized with the time.

Reboot press the DEL key to enter the BIOS, and select the first line of Standard CMOS Features

Use the arrow keys and the + and - keys to modify the date and time lines respectively;

For details, please refer to the motherboard manual for operation).

After the modification, press F10 to save and exit the BIOS, reboot into the system to see if the time is displayed normally.

The system time is inaccurate.

1. It may be that the CMOS battery is dead, please replace the battery.

2. If the battery is new or there is not much time to replace, it may be caused by poor contact of the CMOS battery, if so, stuff a small piece of copper into the contact point.

3. The time of the BIOS is not saved or saved, but it does not take effect. If so, there is a problem with the CMOS circuitry, including the motherboard-related circuitry and the CMOS that holds the BIOS program. If there is a problem with the motherboard circuit, it is recommended to repair it.

If it is caused by a virus, please check and kill it.

:** After installation, first upgrade to the latest version, then exit normal mode and reboot press F8 to enter safe mode. Open the software, click "System Scan", select all the scan results, and then click the "Perform Cleanup" button, if the software prompts you whether to "backup", select "Yes" (the backup is to prevent cleaning errors, if the system does not occur abnormal after cleaning, delete the backup), and follow the prompts.

If the system time is incorrect, right-click the time position in the lower right corner and select Adjust Time. Select the inter time in it, and try to synchronize it there, you need to be connected to the Internet.

If you want to sync, you need to connect to the Internet, right-click the date in the lower right corner, select Adjust Time, and then select Inter Time to update it.

This is in the time setting, and the network time can be synchronized directly, and the specific situation you said has not been encountered.

Possible causes and solutions:

1. The system comes with the calibration time** may not work normally in a certain period of time, so try again at another time.

3. If the calibration time is correct on the day and incorrect on the second day, it may be that the motherboard battery fails, and the CR2032 battery can be replaced and then calibrated again.

You can go to the computer. If there is a problem, you should repair it.

Is there an antivirus, it is recommended to install a good antivirus, upgrade and restart the computer to detect computer viruses and clean the registry and junk. Now good, antivirus software includes 360, QQ PC Manager, Kingsoft Antivirus and other antivirus software.

You can also use anti-virus software, which has a proofreading time program to proofread the time. For example, the Kingsoft Poison Bully I use has this function, in the time protection assistant.

Answer, the computer time synchronization problem to see what appears in the settings of the same question, shut down and start again settings.

Let's see if the BIOS battery is gone? If the battery is not available, the time it will start is different every time. The battery is dead.

Let's change the system and see if your coin cell battery is out of power.

You can set the computer time manually.