N95 can t turn on, N95 black screen?

Updated on number 2024-04-19
10 answers
  1. Anonymous users2024-02-08

    1 Mobile phone virus, but given the security of Saipan, there is no such bullish virus at the moment. So the chances of a virus problem are very small.

    2 You said that you can't turn on the memory can't be turned on, it is likely that the built-in software has a conflict, but you said that the last time you pulled out the card can be turned on, this time it doesn't work, then you can change it and try it, or put your card on another 95 to see, if the situation is still the same, it must be a software conflict, this kind of problem is mostly on the Hong Kong line, you first dial the machine once, see if it can be solved, and then upgrade the mobile phone version to the latest.

    3 If none of the above methods can be done, it is a hardware problem, if you are a licensed product, directly find customer service, if it is a parallel import, then you can only find the person who sells your mobile phone to help you solve it.

  2. Anonymous users2024-02-07

    The situation you're talking about is definitely a problem with the memory card. Use the card reader to check the top of the computer, or use another mobile phone to check the memory card. If it really doesn't work, let's change the memory.

    I see. You this is a typical mobile phone virus. Hehe, the phone is not broken, rest assured. You only need to spend 50 yuan to swipe the system.

    You'd better have a professional take a look at it for you. I think it's poisoning.

    Another word of caution; I personally recommend waiting for the phone to be repaired, immediately install the mobile phone anti-virus software, now the mobile phone virus can not be underestimated, for friends who often let the mobile phone contact with the computer, I hope to take a look, the opinion of the little brother.

  3. Anonymous users2024-02-06

    It's not a problem with the memory card, it's the phone software is out of order, just write the software again, if you don't have a warranty period, you can go to the after-sales service for free maintenance, remember! If the customer service agent asks you how to cause it, you say that this is the case under normal use, otherwise you will be charged.

  4. Anonymous users2024-02-05

    There is a problem with the software on the memory card.

    If the machine is still in the warranty period, take the customer service to see.

  5. Anonymous users2024-02-04

    Is it burned memory slot, it's best to go to the manufacturer to repair it, don't get it yourself.

  6. Anonymous users2024-02-03

    Take the card out and try it again.

    Probably a card issue.

  7. Anonymous users2024-02-02

    Answer 1: See if there is a problem with the screen settings No, restore the original factory settings, not work, after the grid is finished, it is the appearance of the machine port factory, and then it is a program problem, you can only flash the machine, it is best not to flash the machine casually, check the settings first, not in the factory reset, if it doesn't work, then format the card, if it doesn't work, it's best to take it to test it, this kind of problem may also be a problem with the light sensor. *Netizen Pisces*

    Answer 2: I also use 95, and I haven't had a similar problem, and I've installed a lot of various software, so the software shouldn't affect it, but do you often slide around 95's slider, maybe because the screen is too hard to contact the screen I think it's very possible, a slider used before is always slippery to loosen the cable - it is recommended that lz go to customer service to see it, the first repair is free, it seems that classmates a few days ago, the n73 joystick was broken, and the customer service changed it to a new one for free, So it is recommended to take a look, I hope your 95 will be *** netizen Aili * as soon as possible

    Answer 3: These situations are mainly caused by not using and exiting the program correctly, resulting in the wrong reading parameters of the mobile phone when entering the program again!

    Install the Y-B Rowser Manager first, go to the C drive, find the system folder, and delete the file inside, which is equivalent to the error and task history report in the computer! After deleting it, the above situation has improved, oh, my problems are solved after deleting it! Previously, it was necessary to remove the software that went wrong and it was a hassle to reinstall!

    Now there is no need for a very convenient skill*netizen Li Chen*

  8. Anonymous users2024-02-01

    Note: The battery is sufficient when the grid is used, and the data is backed up.

    1.Enter * on standby – soft bar. Only restore the system to factory settings, do not delete files, the effect is not obvious.

    2.Standby input* – soft and hard. Restoring the system to factory settings will delete the personal data of the C drive. However, Route 2 cannot be retained, and it will return to its original state. Sometimes, the C drive file is not deleted with the grid after the machine, and the system is unstable.

    Key hard grid – hard grid. Restoring the system to factory settings will delete the personal data of the C drive. Route 2 can be reserved. It's the same as flashing. Recommended.

    Hard Grid Operation Method:

    Two pure attack hands are required, one hand is to hold down, and the green call button, and the other hand is only to turn on the button. You can't let go of the handshake until the screen formatting....It can be loosened, and after about two distribution of pants and celery clocks, the mobile phone will be automatically turned on.

    6681 6680 6630 n70 n72 does not appear formatting....words, you can only let go when you see the setting time).

  9. Anonymous users2024-01-31

    If there is a problem with the system software, the flashing machine can be solved with nss and nokiasoftwareupdatersetup zh software **upgrade, tutorials and brushing hail machine software jujube belt caution** are there.

    If you choose Hong Kong, you will have Chinese including stool respect jaff flashing machine tutorial, you can upgrade with jaf, you can downgrade if you use phoenix flashing machine to go.

  10. Anonymous users2024-01-30

    If it is a national bank, go to the after-sales service for free replacement, and the parallel cargo plane will have to be repaired, and it must be a water inlet machine!

Related questions
6 answers2024-04-19

Fake N95 masks will be looser when worn, and real ones will be tighter; If the fake N95 mask is compared with light in a dark place, the texture is uneven; The font on the real N95 mask is laser printed with diagonal lines, while the fake is printed with circular dots. >>>More

1 answers2024-04-19

N8609 new product, Carl Zeiss certified 800W lens, inch screen, 16.7 million main screen colors, absolutely clear. The operating system is symbian >>>More

6 answers2024-04-19

There are two possible reasons for this.

1.Mobile phone hardware (amplifier. Antenna switches. MF) damage, water ingress, and heavy falls. It needs to be replaced. >>>More

10 answers2024-04-19

N95 8G screen is inches,N95 is slightly smaller,Inch,8G,Comes with 8G memory,Boot operation exists about 90M,N95 boot storage is too small,Only about 30M,There is little difference between the two in other aspects,The workmanship is basically the same,But the size of 8G is relatively large,I don't know which one you like,I personally recommend the 8G version,There are all the functions that should be there,Buy a good one at one time,Ouku sells 3399 online,N95 According to the color** It's also different, it's about 2700, so you can consider going there to see it.

2 answers2024-04-19

The N91 and N958G versions use the same professional ** processing chip, which is the same in the case of the same headphones, and the N95 ordinary version is slightly worse.