-
Poisoned? Overheating? Kill the virus first and then dissipate the heat.
-
It's a virus!
Antivirus, or install the system.
-
There is a problem with the power supply, if it is a problem with the motherboard, it is the power supply system.
When the computer is powered on POST, if there is a failure, sometimes the alarm sound will be continuous, and different alarm sounds represent.
Depending on the meaning of the information, it is not difficult to diagnose the different error messages. Here are two of the more common ones.
For example, the motherboard BIOS chips (AMI BIOS and Award BIOS) are used to introduce the specific sounds of common POST alarms.
What it means: award bios
1 Short: The system starts normally. Shows that there is nothing wrong with the machine.
2 Short: General error, please go to CMOS installation and re-set the incorrect options.
1 long and 1 short: There is an error in the memory or motherboard. Try to change the memory, if it still doesn't work, you have to change the motherboard.
1 long and 2 short: The display or graphics card is wrong.
1 long and 3 short: The keyboard controller is wrong. Check the motherboard.
1 long and 9 short: The motherboard BIOS chip is wrong, and the BIOS is damaged. Try a different BIOS chip.
Long Ring: The memory module is not plugged in tightly or is damaged. Reinsert the memory module, or replace the memory.
ami bios
1 Short: The memory refresh failed. Replace the memory module.
2 Short: The memory ECC verification error is incorrect. In CMOS settings, set the memory options for ECC check above to disabled.
You can solve it if you use it, but the most fundamental solution is to replace a piece of memory.
3 Short: The basic memory check of the system fails. Change memory.
4 Short: The system clock is wrong.
5 Short: There is an error in the CPU.
6 Short: Keyboard controller error.
7 short: The real mode of the system is wrong and cannot be switched to protection mode.
8 Short: Video memory error. If there is a problem with the video memory, try changing the graphics card.
9 Short: BIOS chip detection error.
1 long and 3 short: memory error. If the memory is damaged, it can be replaced.
1 long and 8 short: Displays a detection error. The monitor cable is not plugged in properly or the graphics card is not plugged in properly.
-
The mouse is broken, and if it is not broken, a disk is poisoned. The problem is too ...
-
Start the registry and set [hkey classes root.]*is the file extension of the item you want to delete) and then quit the registry and restart the computer.
Let's take deleting the "Winrar Compressed File" item in the "New" submenu as an example; The first thing to do is to find [hkey local machnesoftwareclasses.]rar], delete the "shellnew" item under it, go back to the desktop, press the F5 key to refresh, then right-click on the blank space of the desktop, select "New", then you will find that the original "winrar compressed file" has disappeared.
-
Use Windows Cleanup Assistant, or Windows Optimizer to optimize shortcuts.
-
With Super Bunny, point magic settings --menu--new menu One look at it, it should. Good luck. If that doesn't work, regedit4
hex(2):
Copy this and paste it into a new text document, change txt to reg when saving, then double-click to run and create a new one, and then use Super Bunny.
-
Cross Charm Poisoning?
I guess it's rogue software.
Recommend Jinshan cleanup experts.
This is provided that you have troubleshot the hard fault.
-
You're talking about the menu that appears after the mouse clicks the right button.,It's the one that presses refresh.,It should be nothing.。
If there's something like paste or something, the shortcut menu will be a little bigger, and if there's no other display problem, it's not a problem, just leave it alone.
You click refresh a little faster to see if there are any changes.
-
This should be a problem with your resolution program.
-
There's a tile in there, and you can use it.
-
It is estimated that a small virus will be killed
-
Right-click - Properties - Appearance - Advanced.
You see if the title bar of the inactive window is there to modify the size.
If you weren't looking for something else, it would be here.
-
Command "op" -- User System Configuration -- check "Use shortcut menu in drawing area".
Isn't it possible? Then I don't know.
I've only seen a kind of sick sock poison, you can put a Yanxiu toolbox. It can be searched to kill the kind I've seen. You try it.
-
Go to the Control Panel Mouse Touchpad tab.
-
You look at the start bar.,There's an icon in the lower right corner.,There's an icon similar to the touchpad on the computer.,You click on the settings there.,It's not the same as the Windows system.,It's called SY or something.,Look at it.。
That is, the computer can enter the operating system without a hard disk. The implementation of the principle of the network card contains a boot function, which can be connected to a computer with an operating system image, and the operating system image is provided by other computers.
The result is like turning off automatic updates, which means that if you don't upgrade, your system can only remain in its current state, and Microsoft's system patches will not be automatically applied in the future. There is no big problem, if you are not at ease, afraid of being attacked or infected by viruses and Trojans, you can take the following three ways to remedy: one is to install Microsoft's update **** new update in the second week of each month. >>>More
I don't understand ......But teachable.
The boot file is placed on the server side...
When the diskless workstation boots the computer, the network card will send instructions to the diskless server to ask for the system boot file and put it in the memory of the diskless workstation... And the files necessary to boot the system are also stored in memory. >>>More
Dizzy. The question is simple. Why so many. Depressed. Software with Ruiqi 1528 cracked version。 XP Lite for the system. I don't know how to search for my name. You should be able to find it.