What is the difference between the intersecting wire cutting control system???

--- Shanghai Baoye Lao Zhou:

Generally, the control system of intersecting wire cutting machine is divided into the following types:

1.General CNC system, programming software programming, CNC system control CNC axis linkage interpolation, logic control with CNC system with PLC, this way due to the high cost, but few foreign brands in use;

2.Computer + motion control card (motion controller), the computer is responsible for data processing and calculation, and the motion controller is responsible for the linkage interpolation of the numerical control axis, which is the most common;

3.Touch screen + PLC, the touch screen is responsible for human-computer interaction, PLC is responsible for CNC axis linkage interpolation and logic control, this structure is the simplest, but due to the poor data processing ability of PLC, it can only be used for simple cutting, and this structure is used less;

4.The special control system for intersecting wire cutting machine developed with ARM, DSP, CPLD and so on as the core is simple and reliable, but only a few foreign manufacturers use it for the reasons of development capacity and cost.

How does the CNC intersecting bright digging and punching wire cutting machine achieve continuous cutting? Hello dear! The so-called CNC intersecting wire cutting machine continuous cutting is only need to import the drawings into the computer of the equipment, input the pipe parameters, you can automatically cut on the pipe, no need for manual intervention, not only can improve the material utilization rate, but also can improve the cutting efficiency, of course, the cost has also been reduced, so that on the whole, for the enterprise, the economic benefits will also be improved accordingly, and when selling in bulk, when considering the cutting of pipe fittings, if you re-cut the next pipe fitting, there is too much waste of residual material, Our engineers have designed the torsional cutting method, which can effectively reduce the waste of raw materials.

Hope it helps!

Intersecting wire cutting machine is a kind of equipment that can automatically complete the cutting and processing of intersecting wire ends, intersecting wire holes and pipe elbows (shrimp sections) of metal round pipes, square pipes or special-shaped pipes. The intersecting wire cutting machine aided design programming software used with this equipment is also a very important core accessory.

Main features of the device:

1. The process of cutting with plasma or flame;

6 axes control the number of axes;

3. CNC control of original imported industrial computer;

4. Touch screen man-machine interface, high positioning and walking accuracy;

5. The standard configuration of the drive system is chuck + roller bed + 2 rows of stainless steel rollers;

6. Built-in V-shaped roller logistics conveying system.

North China CNC cutting equipment OEM production base.

Features and uses:

1) CNC intersecting wire cutting machine is a kind of equipment that automatically calculates and cuts the intersecting line holes, intersecting line ends, and elbows (shrimp sections) at the junction of steel pipes and non-ferrous metal pipes. This model is widely used in construction, chemical industry, shipbuilding, mechanical engineering, metallurgy, electric power and other industries of pipeline structure cutting processing, such processing in the past mostly using the production of models, marking, manual lofting, manual cutting, manual grinding and other backward and complicated operation technology.

2) KSR series CNC pipe intersecting line cutting machine can cut this kind of workpiece very conveniently, without the operator to calculate, program, just enter the pipe radius of the pipe inertial system, intersection angle and other parameters, the machine can automatically cut out the intersecting line, intersecting line hole and welding groove of the pipe.

CNC flame intersecting wire cutting machine.

The cutting has the ability to cut carbon steel with large thickness, and the cutting cost is low, but there is a large cutting deformation, the cutting accuracy is not high, and the cutting speed is low, the cutting preheating time and the piercing time are long, and it is difficult to adapt to the needs of fully automatic operation. Its application is mainly limited to carbon steel and large-thickness plate cutting, and will gradually be replaced by plasma cutting in medium and thin carbon steel plate cutting.

CNC plasma intersecting wire cutting machine.

Plasma cutting has a wide cutting field, can cut all metal pipes, fast cutting speed, high efficiency, cutting speed up to more than 10m min. At present, with the maturity of high-power plasma cutting technology, the cutting thickness has exceeded 100mm, which broadens the cutting range of CNC plasma intersecting wire cutting machine.

CNC intersecting wire cutting machine, is a new type of CNC cutting equipment, the majority of users in the selection of there are still a lot of misunderstandings, first of all, to clarify the following points:

1. The cutting length of the pipe fitting.

2. The cutting diameter of the pipe arm.

3. The cutting thickness of the pipe arm.

4. The weight and moment of inertia of the whole tube.

5. Whether the universal rotation function and beveling function are required.

6. Choose the appropriate cutting method for the material of the pipe: generally the carbon steel plate is cut by flame, and the arm pipe and stainless steel are suitable for plasma cutting.

There is also the installation of the factory and control system, computer graphics and graphics conversion, etc.

After decades of development, the intersecting wire cutting machine has made great progress in cutting energy and CNC control system, and the cutting energy has developed from a single flame energy cutting to the current multiple energy (flame, plasma, laser, high-pressure water jet) cutting methods; The control system of CNC intersecting wire cutting machine has developed from the original simple function, complex programming and input mode, and low degree of automation to a control mode with perfect functions, intelligence, graphics and networking; The drive system has also changed from stepper drive, analog servo drive to today's all-digital servo drive;

Intersecting wire cutting equipment is mainly divided into intersecting line cutting machine, intersecting line bevel cutting machine, CNC intersecting wire cutting machine, which is used for the needs of intersecting line cutting on the pipe, the intersecting line is actually the part connected between the two intersecting pipes, in order to make the two pipes can be welded together completely, an opening must be opened on the two pipes that require intersection, and these two ports are required to be able to dock, which is especially widely used in various industries such as oil pipelines, waterways, sewage pipelines, and hydropower generation. The CNC intersecting wire cutting machine is to use a digital program to drive the movement of the machine tool, and when the machine tool moves, the cutting tool is randomly equipped to cut the object. This kind of mechatronics cutting machine is called CNC cutting machine.