The newly bought kettle has a strong plastic smell, how to get rid of it?

When cleaning, you need to turn off the power supply and allow the water and bottle to cool before putting your hands into the container. When cleaning the body or plastic parts, use a rag containing detergent to dry and gently wipe the stained area, and then wipe off the detergent with a clean wet rag.

The inner part can be brushed with a foam rag and warm water. Do not rub with soapy water, hard brushes or solvents. The inner tank changes color such as milky white, black, red, etc. This is caused by the use of impurities in the water and can be treated in the following ways:

1. Add water to the inner tank to the full water level.

2. Add vinegar, citric acid or fresh lemon juice.

3. Plug in the power supply to boil the water, keep it warm for another 1-2 hours, then unplug the power supply and let the inner tank cool.

4. Use a nylon soft brush to remove the dirt, and then rinse it with clean water.

5. To remove the taste of lemon, just boil it again, press it out and pour it out.

The first few times you boiled water, don't drink it, you can use it to wash your hair, take a bath, etc. Just bought, it is normal to have a plastic smell, and if you boil the water a few times, I believe that the plastic smell will naturally be reduced a lot. You can also go to the supermarket to buy a few packs of deodorant, when boiling water, add, remember not to drink, after burning a few times, I believe the smell will be gone.

This is my actual life experience.

Hope mine is helpful to you, hope.

Don't thank me, I'm just surnamed Lei.

It's normal to have a plastic smell when boiling water in a kettle. When the electric kettle boils water, the temperature of the inner tank will be very high, and the temperature will be transferred to the plastic of the shell, causing the plastic to emit gas and dissolve into the water. If you use food-grade plastics, then the harm to the body is much smaller, but there are many unscrupulous businesses in order to save costs and make more profits, so they use non-food-grade toxic and harmful plastics to make hot water kettles, so that the boiled water is very harmful to human health.

There are also some inferior kettles because of rough workmanship, leakage after molding, and glass glue, toxic substances will enter the water when boiling water, not only the taste is very poor, but also the damage to the body is huge, and even lead to poisoning and carcinogenic Ready-to-take elephant.

Precautions for the use of the kettle

When the electric kettle is not in use, it should be placed in a dry place to avoid moisture and reduce safety performance; The electric kettle must be supervised during the boiling process and placed out of the reach of children; Make sure the power supply is disconnected before removing the kettle from its heating outlet.

Because the electric kettle works at a high temperature and is used for a long time, the rubber ring will still age and lose its elasticity, resulting in the leakage of water in the kettle, resulting in various faults such as carbonization of the bakelite socket of the electric kettle, short circuit, metal melting of the kettle body, and fuse fuse.

How do you smell the smell of plastic grinding hole material after boiling water in the kettle? It shows that the materials used in the kettle are not up to standard, and the boiled water is likely to contain harmful substances and endanger health. Once the water is boiling, open the lid of the kettle as soon as possible, or pour the water into the thermos as soon as possible to avoid the plastic smell of the kettle lid and handle dissolving into the water for a long time.

If the kettle still smells of plastic after being used for a long time, it is recommended to replace it. This is the problem of the plastic jujube itself. You can choose a kettle made of metal.

Plastics are polymer compounds made by addition polymerization or polycondensation reaction with monomers as raw materials. Its resistance to deformation is moderate, between fiber and rubber. It consists of synthetic resins and fillers, plasticizers, stabilizers, lubricants, pigments, and other additives.

Plastics are polymer compounds made by addition polymerization or polycondensation reaction with monomers as raw materials. Its resistance to deformation is moderate, between fiber and rubber. It consists of synthetic resins, fillers, plasticizers, stabilizers, lubricants, pigments and other additives.

Introduction: Newly bought. Plastic electric kettle, generally there will be a pungent smell, even after boiling water, the smell is still there, the following are a few ways to remove the smell to share with you:

1. You can use a plastic kettle to connect half a pot of tap water, add 2 spoons of salt, and keep shaking (up and down, left and right), and repeat several times. Boil the salt water again, and repeat it several times, it will be much better. Because, after the salt is dissolved, there will be small particles, which can flush the small potholes on the surface of the plastic to achieve the effect of deodorization.

It is not good to use vinegar to remove the taste, because the strong acid will only corrode the plastic wall, and the taste is stronger.

2. Milk deodorization method: first clean it with detergent, then pour two tablespoons of fresh milk into the plastic kettle, cover the lid, shake it, make every corner of the kettle contact with the milk, about a minute, and finally pour out the milk and clean the kettle.

3. Orange peel deodorization method: first clean it with detergent, then put the fresh orange peel in, cover it, and let it dry for about 3 to 4 hours.

4. Scrub with waste tea leaves, and then rinse with water, the taste will be much lighter.